Bulletin No.: PIC6254E
Published date: 07/23/2020

Preliminary Information
PIC6254E Information on Servicing the 1LE Vinyl Hood Wrap
Models
Brand:
Chevrolet

Model:

Model Years:

Camaro

2017 - 2021

VIN:
from
All

Engine:

to
All

All

Transmissions:
All

Supersession Statement
This PI was superseded to update Model Years. Please discard all copies of PIC6254D.
Involved Region or
Country

North America

Additional Options
(RPO)

Equipped with the 1LE track package, RPOs A1X, A1Y, or A1Z

Condition

All 2017 - 2021 Camaro 1LE cars come equipped with a vinyl hood
wrap that is applied before the cars arrive at the dealership. Some
dealerships may be looking for additional information on this wrap
when it comes to care, cleaning, or in some situations, replacement
of the entire hood wrap.

Cause

These hood wraps are all made of a matte finished vinyl material
and all of them are black in color. They can be damaged if they are
not cared for properly. The most common complaints are smudges
or stains that are usually the result of fingerprints, improper
cleaning practices, and/or products or leaves that remain on the car
and create an outline on the vinyl. In some situations, the customer
may even comment about small rips / other physical damage to the
wrap itself.

L4 Turbo 1LE

V6 1LE

V8 1LE

ZL1 1LE

Correction:
If any suspect damage is found on one of these hood wraps, dealerships are to first attempt
to clean the hood before taking any other action.
Hand washing is recommended using a mild detergent and water. Immediately rinse the
vehicle and dry the graphic with a soft squeegee and/or soft cloth to help restore the
graphic's luster.
·
Touchless car washing systems may be used. To avoid water spotting on graphic,
always go through the drying cycle.
·
To remove tar and bugs from the graphic, use a commercial cleaner designed for such
use, but do not rub vigorously. Immediately wash with a mild detergent / water solution,
rinse with water, and dry.
If the concern remains and it's determined a new hood wrap is needed, the 1LE hood wrap
(Hood Wrap Decal) can be obtained thru GM Service Parts. All 1LE's use the same part
number hood wrap. It will be necessary to cut the holes in the hood wrap to accommodate
any hood vents or heat extractors however. The 1LE hood wrap must be installed by a
certified "wrap" technician. If your dealership/body shop does not have a certified installer,
contact Ryan Scislowicz at Kay Automotive Graphics. His phone number is 248-377-4999,
extension 3640. He will be able to direct the dealership to the local certified installer.
If the repairs are covered under the terms of the bumper-to-bumper warranty, photos of the
entire car and localized damage to the hood wrap should be taken and submitted as a Field
Product Report.
NOTE: The labor times in this PIC have been updated for certain models. The V8 cars have
increased labor times as the dealership technician will now be responsible for removing and
reinstalling the hood insert / hood vents on the vehicle. This will no longer be done by the
"wrap" technician.

Parts Information
Part Number
84406072

Description
Decal - Hood

QTY
1

Warranty Information
For vehicles repaired under the Bumper-to-Bumper coverage (Canada Base Warranty coverage), use the following
labor operation. Reference the Applicable Warranties section of Investigate Vehicle History (IVH) for coverage
information.
Labor Operation

1480768*

Description

Installation of 1LE Hood Wrap

RPO

Labor Time

A1X

3.0 Hr

A1Y

4.0 Hr

A1Z

4.0 Hr

* This is a unique labor operation for bulletin use only.

Version History
Version

Modified

6
01/17/2016 - Created on
02/24/2017- Updated Warranty Information
06/16/2017 – Updated Model Years and ZL1 1LE Model
08/27/2018 - Updated Model Years
06/19/2019 - update the V8 labor times
07/23/2020 - to add the 2020-2021 model years

© 2020 General Motors. All Rights Reserved.