Technical product information
Topic
Market area
Brand
Transaction No.
Level
Status
Release date

New Continental GT and GTC - Rear quarter glass not fully
closing
United States E05 Bentley USA and rest America (6E05)
Bentley
2060079/1
EH
Approval

New customer code
Object of complaint

Complaint type

body fixtures and fittings -> window opening/closing, window heating
body fixtures and fittings -> window opening/closing, window heating -> electric
window
lifter and fittings -> window opening/closing, window heating -> window
body fixtures
return at door- closing
body fixtures and fittings -> window opening/closing, window heating -> window
return at door- closing

functionality
functionality -> cannot be closed

Vehicle data
New Continental GT and GTC
Sales types
Type MY Brand Designation Engine code Gearbox code Final drive code
3S3*
3S3*
3S3*
3S4*
3S4*

2018 E
2019 E
2020 E
2019 E
2020 E

*
*
*
*
*

*
*
*
*
*

*
*
*
*
*

Chas is numbers
Manufacturer Filler Type Filler MY Factory From
SCB

*

*

Documents
Document name
master.xml

*

*

C

To

000011 081983

Prod from Prod to

functionality -> without
function / defect
functionality -> without
function / defect

Position

rear left
rear
righ
t

Customer statement / workshop findings
During window and/or door close operation, the front door drop glass closes and seals (Point A) however, the rear quarter glass does
not fully close and seal (Point B) leaving a gap between the front and rear glass (Point C) – Figure 1.

Figure 1.

Technical background
Refer to the Measure section of this TPI

Production change
All vehicles from VIN SCBCG13S5LC081983 have the latest level of software installed at the time of production

Measure
The current vehicle Software, Record Number (Dataset) and Record Version levels must be determined, prior to continuing with this document,
as follows:
Note:- Vehicles manufactured from SCBCG13S5LC081983 have the latest Software, Record Number ( Dataset) and Record Version installed.

Software, Record Number and Record Version levels
From the Bentley approved Diagnostic tester main screen, select Control units and then Control units list – – figure 2.

Figure 2
Scroll to 0042 - Door Electronics Drivers Side (42 – Door Electronics Drivers Side) – figure 3.

Figure 3.
“Right click” on 0042 - Door Electronics Drivers Side (42 – Door Electronics Drivers Side) and select Guided Functions – Figure 4.

Figure 4.
Select 42 – Read identification data (Rep.Gr.57) then Execute – figure 5.

Figure 5.
Make a note of “Software Part Number”, “Software Version”, “Record Number” and “Record Version”– figure 6.
Cross reference the “Software Part Number”, “Software Version”, “Record Number” and “Record Version” with Table 1 below, determine if the
Control Unit requires an update. Continue to check the three remaining Control Units – 0052, 00BB and 00BC using the same process.

Figure 6.
Table 1. Software, Record Number and Record Version levels
Control Unit Address

Software Part Number

Software Version

Record Number - Target Record Version - Target
Data Container
Data Container Version

0042 – Door Electronics
Drivers Side

4M1959953D

0189

V03.935.323.BY

0002

0052 – Door Electronics
Passenger Side

4M1959952D

0189

V03.935.323.EY

0002

00BB – Door Electronics 4M1959955D
Drivers Side - Rear

0189

V03.935.306.KT

0001

00BC – Door Electronics 4M1959955D
Passenger Side - Rear

0189

V03.935.306.KU

0001

If the Door Control Unit Software, Record Number (Dataset) or Record Version are not at the levels in Table 1 proceed to Control Unit Update,
below.

Control Unit Update
 The closed- circuit voltage of the vehicle must be at least 12.5 V during the update. Connect a suitable battery charger to the vehicle.
For further information refer to the Repair manual.
 The closed- circuit voltage of the vehicle must be at least 12.5 V during the update. Connect a suitable battery charger to the vehicle.
For further information refer to the Repair manual.
 Because of the highest transmission stability you MUST use the diagnosis interface VAS 6154 ( WiFi diagnostic tool) ONLY in USB
operation or the cable- connected VAS 5055 for the reprogramming ( updating) of control units. If these units are not available, the
diagnosis interface VAS 5054 ( A) can also be used in USB mode.
 Do Not under any circumstances use a Bluetooth connection to conduct the reprogramming ( updating) of control units.
1) Switch on vehicle ignition, ensure the ignition is on for the duration of the update (unless otherwise instructed).
2) From the diagnostic tool main desktop select the Off Board Diagnostic Information System
- Select – Start diagnosis.
- Select – Model / Engine.
3) Select Special functions (1), Select SVM – Problem related Hardware/Software Update (2), Select Perform test (3) – Figure 7.

Figure 7.
4) At the SVM screen (1) enter the specific SVM code 370DOORS189 and then select Adopt (2) – Figure 8.

Figure 8.
5) Check you have entered the correct SVM code (1) and select Yes (2) and follow all on screen prompts – Figure 9.

Figure 9.
- When prompted enter your global user ID and password
- Follow all on screen prompts to continue through the procedure, the identification data will be transferred
- Once the software that requires changing is detected select Done/Continue, Follow all on-screen prompts the online connection will
deliver the required software to the tester
Follow all on screen prompts until update is complete
6) Clear all DTC’s and ensure all applicable test plans are followed including Basic settings and initialization routines

Warranty accounting instructions
Software update
Warranty type
Damage service number
Damage code
Labour operation code

110 or 910
64 38
00 40
01 51 00 00

Time

Time taken from ODIS log – Maximum 50 TU