NHTSA ID Number: 10178182
Manufacturer Communication Number: 20-FL-006H-1
TSB/Document Date: 2020-08-07
Summary
This bulletin provides information related to the Engine Control Module (ECM) software logic update for DTC P0300-P0304 Misfire. This update addresses the intermittent misfire that may only occur at cold engine warmup.
GROUP
NUMBER
FUEL SYSTEM
DATE
Technical Service Bulletin
20-FL-006H-1
MODEL(S)
JULY 2020
Kona (OS) 2.0L
Veloster (JS) 2.0L
ECM UPDATE FOR KONA/VELOSTER 2.0L P030X MISFIRE
SUBJECT:
(This bulletin has been revised to remove 2020MY Kona from applicable vehicles)
Description:
This bulletin provides information related to the Engine Control Module (ECM) software logic update
for DTC P0300-P0304 Misfire. This update addresses the intermittent misfire that may only occur at
cold engine warmup.
Applicable Vehicle:
2018-2019 Kona (OS) with 2.0L GDI engine.
2019 Veloster (JS) with 2.0L GDI engine.
GDS Information:
System Selection: Engine (ECM)
Event #
Description
597*
OS 2.0 MPI P030X DTC IMPROVEMENT
598*
JS 2.0 MPI P030X DTC IMPROVEMENT
*or any later updated event that comes up.
Warranty Information:
Model
Kona (OS)
Veloster(JS)
Op Code
39171F07
Operation
ECM UPGRADE
Op Time
Causal
Part
Nature
Code
Causal
Code
0.3 M/H
39171-2ES** (OS)
39173-2ES** (OS)
39171-2EJ** (JS)
39173-2EJ** (JS)
39175-2EJ** (JS)
39177-2EJ** (JS)
I3T
ZZ3
**Refer to applicable parts catalog for full ECM causal part numbers.
Circulate To: Service Manager, Warranty Manager, Service Advisors, Technicians, Fleet Repair
ECM UPDATE FOR KONA/VELOSTER 2.0L P030X MISFIRE
SUBJECT:
:
NOTICE
You must initially perform the GDS ECU Update in Auto Mode.
If the ECU Update starts but then fails in Auto Mode, perform the update in Manual Mode to
recover.
!
WARNING
GDS Vehicle Battery Voltage Warning:
If voltage is below 12 volts as per the below GDS warning, then select Back and
operate the vehicle in Ready mode for at least 20 minutes to ensure an adequate
battery state of charge for reliable update results. Turn ignition back on, and then retry
the ECU update again.
Service Procedure:
1. Perform GDS software update:
Refer to TSB 15-GI-001 for the detailed tablet-based Mobile GDS ECU update
procedures.
Refer to TSB 15-GI-002 for the detailed PC-based GDS ECU update
procedures.
2. Check for Diagnostic Trouble Codes in the ALL menus and erase any DTC.
3. Confirm normal vehicle operation.
TSB #: 20-FL-006H-1
Page 2 of 4
SUBJECT:
ECM UPDATE FOR KONA/VELOSTER 2.0L P030X MISFIRE
SUBJECT:
ROM ID Table:
# 597.OS 2.0 MPI P030X DTC IMPROVEMENT:
VEHICLE
18MY
Kona (OS)
IMMO
ECU P/N
ULEV
+IMMO
39171-2ESE0
ULEV
+IMMO
39171-2ESJ0
ULEV
-IMMO
39173-2ESE0
ULEV
-IMMO
39173-2ESJ0
ULEV
+IMMO
39171-2ESE1
ULEV
+IMMO
39171-2ESJ1
ULEV
-IMMO
39173-2ESE1
ULEV
-IMMO
39173-2ESJ1
6AT
2.0L
19MY
6AT
ROM ID
OLD
OS8UPAAS690A
OS8UPAAS69AA
OS8UPAAS69BA
OS8UPAAF69EA
OS8UPBAS690A
OS8UPBAS69AA
OS8UPBAS69BA
OS8UPBAF69EA
OS8UPAUS690A
OS8UPAUS69AA
OS8UPAUS69BA
OS8UPAUF69EA
OS8UPBUS690A
OS8UPBUS69AA
OS8UPBUS69BA
OS8UPBUF69EA
OS9UPAAS694A
OS9UPAAS695A
OS9UPBAS694A
OS9UPBAS695A
OS9UPAUS694A
OS9UPAUS695A
NEW
OS8UPAAF69EB
OS8UPBAF69EB
OS8UPAUF69EB
OS8UPBUF69EB
OS9UPAAF698A
OS9UPBAF698A
OS9UPAUF698A
OS9UPBUS694A
OS9UPBUF698A
OS9UPBUS695A
# 598.JS 2.0 MPI P030X DTC IMPROVEMENT:
VEHICLE
ULEV
IMMO
ECU P/N
+IMMO
39175-2EJW0
6MT
ULEV
Veloster (JS) 2.0L
-IMMO
+IMMO
-IMMO
NEW
JS9UP2CF69EB
39177-2EJW0
JS9UP2VF69EB
39171-2EJW0
JS9UP2AS69CA
JS9UP2AS69DA
JS9UP2AS69DB
JS9UP2AF69EA
JS9UP2AF69EB
39173-2EJW0
JS9UP2US69CA
JS9UP2US69DA
JS9UP2US69DB
JS9UP2UF69EA
JS9UP2UF69EB
6AT
ULEV
OLD
JS9UP2CS69CA
JS9UP2CS69DA
JS9UP2CS69DB
JS9UP2CF69EA
JS9UP2VS69CA
JS9UP2VS69DA
JS9UP2VS69DB
JS9UP2VF69EA
19MY
ULEV
ROM ID
NOTE: -IMMO=Key start, +IMMO=SSB
TSB #: 20-FL-006H-1
Page 3 of 4
SUBJECT:
ECM UPDATE FOR KONA/VELOSTER 2.0L P030X MISFIRE
SUBJECT:
:
Manual Mode Password:
# 597.OS 2.0 MPI P030X DTC IMPROVEMENT:
MENU
PASSWORD
OS 2.0 MPI 6AT -IMMO 39173-2ESE0
OS 2.0 MPI 6AT -IMMO 39173-2ESJ0
OS 2.0 MPI 6AT -IMMO 39173-2ESE1
OS 2.0 MPI 6AT -IMMO 39173-2ESJ1
OS 2.0 MPI 6AT +IMMO 39171-2ESE0
OS 2.0 MPI 6AT +IMMO 39171-2ESJ0
OS 2.0 MPI 6AT +IMMO 39171-2ESE1
OS 2.0 MPI 6AT +IMMO 39171-2ESJ1
7320
7321
7322
7323
7120
7121
7122
7123
# 598.JS 2.0 MPI P030X DTC IMPROVEMENT:
MENU
PASSWORD
JS 2.0 MPI 6MT -IMMO 39177-2EJW0
JS 2.0 MPI 6AT -IMMO 39173-2EJW0
JS 2.0 MPI 6MT +IMMO 39175-2EJW0
JS 2.0 MPI 6AT +IMMO 39171-2EJW0
7720
7320
7520
7120
NOTE: -IMMO=Key start, +IMMO=SSB
TSB #: 20-FL-006H-1
Page 4 of 4
SUBJECT:
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 20-FL-006H-1
Replacement Service Bulletin Number:
MFR Communication Date: 2020-07-23
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM:SOFTWARE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility.
- 【A MUST-HAVE TOOL FOR DIYERS】 - VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Similar to a fixd car diagnostic tool, using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! Read Codes (DTCs); Clear Codes; Live Data; View Freeze Frame; I/M Readiness; Vehicle Information.
- 【KEEP ENGINE IN GOOD STATUS】 - VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light). Similar to a fixd car diagnostic tool, this car code reader helps ensure your engine stays in top condition.
- 【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle car code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.
- 【LIVE DATA & RETRIEVE FREEZE FRAME】 - This diagnostic scan tool for accurate diagnosis enables you to retrieve data from vehicle sensors, such as Engine RPM, Intake air temperature, Short/Long term fuel, Misfire data and etc. The freeze frame is stored in the PCM together with the diagnostic trouble code (DTC) related to the fault. Comparable to a fixd car diagnostic tool, the VD10 car code reader car scanner can be a valuable & practical diagnostic aid and also greatly help when diagnosing intermittent problems.
- 【I/M READINESS for THE S-nn-0-g CHECK】- OBDII vehicle may not pass the annual inspection unless the required monitors since reset are complete. So you should at least read the readiness monitors and make sure they are ready. This car obd2 scanner diagnostic tool is equipped with I/M readiness function to check the operations of the e-m-issi0n system on OBD2 compliant vehicles, run I/M monitor readiness test, checking if the pass vehicle s-m-0-g inspection.
- 【Professional Diagnostics】 The VD80 BT Lite bidirectional obd2 scanner is a professional OBD2 scanner diagnostic tool, delivering vehicle diagnostics right in your own garage. It supports 4,000+ active diagnostic tests, 28+ maintenance service functions, ECU coding, PMI calibration, brake service reset, and OEM-grade full-system vehicle scanning—perfect for DIYers and pros looking for powerful automotive tools. The available function tests vary by model—please to confirm compatibility.
- 【ADVANCED ECU CODE, CUSTOMIZE OE-SETTINGS】As a complete car code reader and reset tool, the VD80 BT Lite bidirectional obd2 scanner supports ECU coding for VW, for Audi, for BMW, for Benz, for Mitsubishi and more. PMI function for Ford/for Lincoln/for Mazda, supports copy data into new module. Step-by-step Guided Diagnostics makes complex jobs easier—making this one of the most reliable code readers & scan tools on the market.
- 【100000+ Vehicles Compatibility – CAN FD/DOIP】 VD80 BT Lite Auto Scanner Compatible with 100,000+ vehicles worldwide, this bidirectiona car scanner works with all OBD2-compliant vehicles manufactured after 1996, covering more than 100 brands worldwide. It also supports CAN FD, DOIP and FCA Secure Gateway protocols, boost 2X faster data transfer, covers 99% of U.S., EU and Asian cars. With 22 languages and 2 years of f*ree updates—future-proofing your car reader diagnostic for all cars.
- 【28+ Maintenance Services & Calibration Functions】VD80 BT Lite scanner for car Supports 28 maintenance services, including resetting oil and service lights after routine maintenance, registering new batteries for proper system operation, and clear clogged filters and restore performance. Additionally, it calibrates TPMS sensors after tire rotations, resets brake systems after pad replacements, relearns steering angle sensors after alignments, and more. These functions help your vehicle quickly and accurately return to peak performance—without the costly dealer visits.
- 【True Bidirectional Control – Diagnose with Confidence】Standing out with full-system coverage and extensive active test capabilities, the VD80 BT Lite bidirectional scan tool retrieves data from electronic control units and performs a wide range of active tests. You can real-time control over modules like fuel pumps, windows, A/C clutches, and relays. Perform 100+ advanced functions including throttle adaptation, injector coding, VIN write, idle relearn, and ABS bleed—helping you fix it right the first time with this all-in-one car diagnostic scanner.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.