NHTSA ID Number: 10177833
Manufacturer Communication Number: 15-236-18R
TSB/Document Date: 2020-08-03
Summary
The following information addresses reprogramming file availability and a software update installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation head units utilized in the models listed.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 15-236-18R
Replacement Service Bulletin Number:
MFR Communication Date: 2020-07-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2018 Subaru
of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
SERVICE BULLETIN
APPLICABILITY: 2019-20MY Impreza
2019-20MY Crosstrek (Including Hybrid Model)
2019-20MY Forester
2019MY Legacy/ Outback
2019-20MY WRX
2019-20MY BRZ- Navigation -equipped ONLY
2019-20MY Ascent
SUBJECT:
NUMBER: 15-236-18R
DATE: 12/04/18
REVISED: 07/28/20
Reprogramming File Availability for Optimization of
Harman Gen 3.1 Audio and Navigation Head Units
INTRODUCTION:
The following information addresses reprogramming file availability and a software update
installation procedure to provide optimization to the new Harman Gen 3.1 Audio and Navigation
head units utilized in the models as listed above. The procedure will involve either downloading
the software update files from Subarunet (or using those sent directly from Nuspire) and transferring
them onto a flash drive for head unit installation. These files do NOT include Map Update data. It is
VERY IMPORTANT to read and understand this information completely to understand all changes
from prior releases before proceeding.
A time line chart along with a complete list of all the conditions addressed by this and previous
Harman 3.1 software updates is provided in “Appendix A” located at the end of this bulletin.
IMPORTANT NOTES:
•
If a vehicle presents with a current blank or black screen condition, request an exchange unit.
•
Be sure to locate and re-format any existing USB drives used for updating Harman audio
units in order to fully clear them before adding these new files to them.
•
On BRZ models, this update applicable to HIGH / Navigation-equipped head units only.
•
If a Map update is pending, please follow the instructions posted on Subarunet: Service
Operations & Technical > Forms/Downloads > Navigation System Map Updates and select
the applicable link.
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 1 of 17
PRODUCTION CHANGE INFORMATION:
These updates (December 2019) apply to the models listed
above equipped with Harman Gen 3.1 Audio and Navigation
head units only.
The latest software version (including all available updates) was
incorporated into production per the starting VIN table to the
right:
Model
Starting VIN
Legacy
TBD
Outback
TBD
Impreza 4-Door
TBD
Impreza 5-Door
TBD
Crosstrek
TBD
BRZ*
TBD
Forester
TBD
Ascent
TBD
*HIGH / Navigation - equipped head units only
PART INFORMATION:
Multimedia System Type
Descriptive Features
6.5 Inch Display Audio System (Base)
No CD slot / Eject Button
6.5 Inch Display Audio System (Base +)
Equipped with CD Player and Eject Button
8.0 Inch Display Audio System (Mid)
Phone Button
8.0 Inch Audio / Navigation System (High)
Map Button but no Phone Button
Reference photos of each head unit faceplate are supplied below:
BASE +
Uses MID
update file
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 2 of 17
Materials Required:
An empty, USB 2.0 or 3.0 storage device (flash drive) will be needed to perform the update
procedure. The device should be dedicated to storing and transferring these updating files only. It
must be a minimum of 16GB or more in size and contain a NTFS file format before downloading the
update files onto it.
IMPORTANT NOTES:
•
NEVER change the update file names after downloading them.
•
NEVER save any other files on the same flash drive.
There are various types of USB flash drive available from many suppliers. If the head unit does
NOT recognize the USB drive during the reprogramming process, due to Controller IC type of USB
drive or Compatibility with the head unit, clear the file and re-format the flash drive for “FAT32” as
outlined below in Step 2 instead of “NTFS”. If a recognition problem persists, use a USB flash drive
from another manufacturer.
Recommended Flash Drives:
•
Kingston®: Data Traveler G3, G4, SE9 or the Hyper-X Series
•
SanDisk®: Cruzer Series, Ultra Flair
•
Transcend®: JetFlash 300, 600 or 790
•
Verbatim®: Store ‘n’ Go
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 3 of 17
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
Step 1- Software Version Confirmation From the HOME screen, touch “Settings”.
After starting the engine, from the HOME screen, touch “Settings”.
•
From the Settings screen, scroll down to and then touch “System Information”.
•
The currently installed software version will be displayed. If the Software Version is
Rel_UE 19.22.70 or Rel_UE 19.25.70 (or before), proceed to Step 2. This version number
is the same for all 4 levels of head unit.
VERY IMPORTANT: If the current version is Rel_UA 19.36.70 or Rel_UA.19.42.70, STOP as the
latest version has already been installed and no update is required at this time.
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 4 of 17
STEP 2- Prepare the USB:
CAUTION: Do not use any USB flash drive which utilizes file organizing software or an operating
system.
VERY IMPORTANT: Before attempting to download any data files, confirm the PC and flash drive
being used is not infected with any virus. The flash drive MUST be formatted for NTFS .
•
Make sure the USB flash drive contains no
other files.
•
Right click on the corresponding
“Removable Disk”.
•
Select “Format”.
•
From the File System drop-down menu,
select “NTFS”
•
Check the “Quick Format” box (if not
already done).
•
Click on “Start” to format the USB flash
drive.
STEP 3- Download the Update Files to the USB:
VERY IMPORTANT: When updating a “Base +” head unit, the “MID” update files must be used.
The files are available for download on Subarunet (see “A” below).
The applicable reprogramming files have also been sent directly to retailers by Nuspire in the same
way a Select Monitor Update would be pushed out. (see “B” below).
Follow “A” when using files downloaded from Subarunet.
Follow “B” when using the files sent directly to the SDS notebook from Nuspire.
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 5 of 17
“A” When using update files downloaded from Subarunet:
Click Here to Access the Downloads for Audio/Navigation Information on Subarunet
IMPORTANT: Files downloaded from Subarunet will be .zip files and must be unzipped before
they can be used. Using the normal audio / navigation system file update download procedure: Go
to Subarunet, select Service Operations and Technical>>Forms/Downloads>>Gen 3/Harman for
Audio/Navi then click on the applicable Hyperlink to download the file(s) to your SDS Notebook or
PC:
BASE- 2019-20 Impreza_Crosstrek_Crosstrek Hybrid & 2019 Legacy-Outback HARMAN AUDIO
UPDATE - DECEMBER 2019
BASE PLUS or MID - 2019-20 Impreza_Crosstrek Crosstrek Hybrid_Forester_Ascent & WRX - 2019
Legacy-Outback HARMAN AUDIO UPDATE - DECEMBER 2019
HIGH - 2019-20 Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 LegacyOutback HARMAN AUDIO UPDATE - DECEMBER 2019
•
Go to Downloads.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Once the files have been downloaded from Subarunet, click on the Downloads folder and then
sort by Date Modified to bring the most recent files to the top of the list.
•
Open / display the contents of File folder, for example (HIGH - 2019-20 Impreza_Crosstrek_
Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Legacy-Outback HARMAN AUDIO
UPDATE - DECEMBER 2019).
•
Click on “Extract All Files”.
•
From the dialog box, browse to My Documents then click on “Extract”.
•
Double-click on the required file (for this example, select the file entitled “HIGH - 2019-20
Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Legacy-Outback
HARMAN AUDIO UPDATE - DECEMBER 2019”).
•
Copy ONLY the “update” folder then paste (or click / drag) it to the “clean” USB flash drive
as listed (Removable Disk) in the directory.
•
To avoid confusion, label the flash drive with the file contents (e.g. BASE 3.1, BASE PLUS
or MID 3.1 or HIGH 3.1).
•
Go to Step 4.
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 6 of 17
“B” When using update files sent directly from Nuspire:
•
Go to My Documents on the GUI screen to display the list of available update files shown
below.
•
CAUTION: After download is complete, NEVER change the file or folder names.
•
Sort by Date Modified to bring the most recent files to the top of the list. The folder is named:
_Harman Audio-Navi Update Files.
•
Double-click on the required file (for this example, select the file entitled “HIGH - 2019-20
Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Legacy-Outback
HARMAN AUDIO UPDATE - DECEMBER 2019”) and the update file will display as
shown.
•
Select the update folder and either copy / paste or click / drag it to the USB flash drive.
NOTE: Do not copy the entire “HIGH-20…” File folder. Copy ONLY the File folder named
“update” to the flash drive
•
Once the folder named “update” is loaded onto the USB flash drive, right click on the drive
and select “Eject”.
•
Remove the USB flash drive after the prompt appears that says “Safe to Remove Hardware”.
•
Mark the USB to indicate the head unit it will update (HIGH 3.1 in this example).
•
Repeat the above steps to create the BASE PLUS or MID 3.1 and HIGH 3.1 USB flash drives
as needed using a separate USB drive for each update folder.
STEP 4- IMPORTANT: Confirm the update folder on the USB flash drive is for the head unit being
reprogrammed ONLY. NEVER install multiple update folders onto the same flash drive at the same
time.
IMPORTANT REMINDER: When updating a “Base +” head unit, the “BASE PLUS or MID 3.1”
update files must be used.
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 7 of 17
•
After confirmation, move to the car and either start the engine or follow the procedure as
outlined in document GR8-1100 on STIS for use of the GR8’s Power Supply Mode.
HIGH - 2019-20 Impreza_Crosstrek_Crosstrek Hybrid_BRZ_Forester_Ascent_WRX & 2019 Leg...
Copy ONLY the folder named “update” to the USB.
•
Never change the folder name from “update”.
•
Confirm there is only a folder named “update” on the flash drive.
CAUTION: Confirm one final time the head unit you are about to update matches the update file
selected. Attempting to install the incorrect update file will disable the head unit.
STEP 5- Update Installation:
IMPORTANT: Always record the customer’s radio station presets and navigation favorites (where
applicable) before proceeding further as they will most likely need to be reset once the update and
re-boot procedures are completed. In addition, some customizable system settings may need to be
reset as they may return to the default setting during the update.
•
With the engine idling (or GR8 connected), plug the flash drive into the USB Port.
IMPORTANT NOTE: If the head unit does not recognize the USB flash drive during the
reprogramming process, this may be due to an incompatible Controller IC in the USB flash drive or
it is otherwise incompatible with the head unit. If this occurs, delete all files from the flash drive and
re-format it to “FAT32”, instead of “NTFS” and reload the appropriate “update” folder to the USB
flash drive. If the USB flash drive is still not recognized, please discontinue the use of that drive and
instead use a USB flash drive from a different manufacturer.
Continued...
Bulletin Number: 15-236-18R; Revised: 07/28/20
Page 8 of 17
•
After the unit “authenticates” the USB flash drive, press “Next” and after the second screen is
displayed, press “Next” again.
NOTE: If an attempt is made to install the wrong “grade” file into the wrong grade head unit
(EXAMPLE: “Base” update file into a “Base Plus or Mid” or “High” head unit), the USB
Authentication error screen below will be displayed:
•
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Resets: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA AutoAuth access for Chrysler, Jeep, Dodge, and Fiat (2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA AutoAuth account is not included with the device. Users must register and pay separately through the official FCA AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford, for GM, for Toyota, for Honda, for Nissan,for Hyundai etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler, for Dodge, for Jeep, for Fiat models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
- 2026 Latest Version – Now Upgraded from 32GB to 64GB: XTOOL D7 obd2 scanner diagnostic tool with bidirectional is designed for DIY enthusiasts, professional mechanics. It now offers 64GB storage for smoother operation. Its 5000mAh battery (with 2500mAh 7.3V fast-charging) supports all-day use. With FCA, CAN FD, and DOIP protocol support, it covers more vehicle models and newer systems. A newly added battery voltage reading shows battery status before diagnostics, helping prevent low-voltage tests that could harm the vehicle. The V2.0 Diagnostic Report allows shops to personalize results with logos, customer details, and attachments to build trust and maintain records.
- Save $500+/Year with Pro-Level Diagnostics: Whether you're a DIYer, starting a repair business, or beginning work at an auto shop, XTOOL D7 car scanner offers advanced features typically found only in expensive professional OBD2 scanners - without the high price tag. With 4,000+ Active Tests & Bidirectional Pids, 36+ Special Functions, advanced module resets like SRS Reset, OE-level All-System Scan (one-click), FCA AutoAuth, CAN FD, DoIP, data export, and 8 PIDs graphing, the D7 auto scan tool covers 100,000+ vehicles (excluding Indian models). Includes 3-Year updates and supports the XV200 endoscope to detect em!ssions and intermittent issues.
- Full Bidirectional Advantage Over Other Code Readers & Scan Tools: The XTOOL D7 automotive scanner offers true bidirectional control plus advanced bidirectional PIDs, letting you send commands to components like A/C clutches, fuel injectors, windows, fans and more, while monitoring sensor responses live to catch elusive issues (even those without warning lights). Unlike budget bidirectional obd2 scanners limited to basic active tests,the D7 car fault scanner gives you full bidirectional control to run ABS pump tests, throttle position, turn fan on/off and solenoid tests, etc. No guessing, no extra fees—just smarter diagnostics
- OE-Level Full System Car Diagnostic Scanner with 8 Live Data Graphs: The XTOOL D7 is a pro-grade diagnostic tool that gives you full access to all vehicle systems—just like Snap on scanners & the factory scan tools, it delivers deep, accurate diagnostics you can trust. Easily view live data streams, retrieve freeze frame, and run active tests to pinpoint issues fast. With the ability to graph up to 8 PIDs at once, you can spot performance trends and troubleshoot like a pro. Whether you're a mechanic or car owner, with the D7 auto scanner you can stay ahead of problems and keep your vehicle running at its best
- High-value Automotive Scanner Diagnostic Tool with 36+ Special Function, Module Resets, Relearns, Calibrations, Adaptations & Initializations: XTOOL D7 diagnostic tool packs 36+ common & advanced maintenance, skip the $150 fee for battery registration after replacement, throttle body relearn after cleaning, or TPMS resets post-rotation, Auto bleed after the pad changes, or Electronic Parking Brake. Need to reset the transmission after towing? Crank sensor relearn for GM/for Dodge? Done. D7 also covered advanced functions like Ad~blue Reset, VIN Write, and many more professional OBD2 scanner functions that we can't list here. Text us your VIN + what you need, we’ll check the compatibility
This product presentation was made with AAWP plugin.
Last update on 2026-05-13 / Affiliate links / Images from Amazon Product Advertising API