2021

A4/S4/A4 allroad
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 Guided Fault Finding must be used, session must be completed and sent to GFF Paperless
 Total PDI Test must be completed prior to any other work involving the scan tool (special function tab -> Total PDI Test)
 Start Guided Fault Finding with the engine running to ensure control modules in transport mode are identified
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information

 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Interior

 Check Elsa for open campaigns and updates

 Verify operation of all seat belts and latches

 Verify Audi phone box customer registration form is present
in vehicle and add the serial number from Elsa (if equipped).
See TSB 2051720

 Check operation of window, lock, and seat controls*

 Perform any open campaigns*
 Perform diagnostic work*
 Install front license plate carrier (if necessary)*

 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation of heated seats
 Verify operation of heated rear seats (if equipped)

Exterior

 Verify operation of ventilated seats (if equipped)

 Check all key buttons and features*

 Verify proper operation of climate control*

 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer

 Inspect operation of all power outlets*

Lighting and Windshield

 Verify operation of front Passenger Occupant Detection
System

 Test exterior lighting functions

 Check panoramic sunroof and sunshade operation*
 Verify the glove compartment opens and closes properly

 Test windshield washers. Correct aim if necessary

Settings

Trunk Inspection

 Set Time source setting to “GPS” and set Auto daylight savings time to “on”*

 Verify trunk is operational

 Verify operation of MMI® touch

 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*
 Verify tool kit is installed securely in luggage compartment
 Verify inflatable spare tire and compressor are present

 Set Time to “Automatic setting” and “Automatic time zone”
 Verify and set language and measurement units*
 Verify Speech Dialog System is operating*
 Set “Entertain. Fad.” in Parking aid to an audible level*

 Set spare tire pressure*

 Set “Music volume while parking” to medium*

 Check battery clamps for proper torque*

 Set dealership location in navigation (if equipped)*

Effective 7-27-2020-US
Version 1.1

PRE-DELIVERY INSPECTION (PDI) | 1

2021

A4/S4/A4 allroad
Audi Pre-Delivery Inspection
Settings (continued)

Driver Assistance

 Turn off Manual Speed Warning (if equipped)*

 Verify cruise control/ACC functionality (if equipped)
 Verify Audi side assist functionality (if equipped)

Media / Radio / SAT

 Verify operation of parking system (if equipped)*

 Verify operation of aux. input

 Verify all vehicle Head-up display functionality (if equipped)*

 Insert SD card and test function of all slots
 Verify HD Radio is turned “off”*

 Activate NAV and follow directions back to dealership (if
equipped)

On-Hoist Inspection

Post-Road Test Inspection

 Remove transport suspension blocks (follow ELSA instruction)

 Verify SOS button is green and Roadside assistance button
LED will remain off

 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*
 Install wheel locks (if equipped)
 Install wheel bolt covers and center caps as supplied*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 It may take up to 20 minutes for the emergency call system to activate (LED turns green) after flight/transport
mode deactivation
 The vehicle must not be delivered to the customer if the
emergency call function has not been successfully activated (LED lights up in green)
 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check service interval and verify correct interval is displayed

Driving Performance

 Check engine oil level*

 Check horn operation

 Check all fluid levels and top off if necessary

 Verify hold and release of electronic parking brake

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles
 Test drive vehicle applying brakes several times*

 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**

 Check steering/tire alignment

Audi connect® (USA ONLY) (if equipped)

 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer

 Turn on the Wi-Fi® hotspot (if equipped)*

 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands

 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*
 Enable satellite map view for navigation (if equipped)*

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 7-27-2020-US
Version 1.1

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2