NHTSA ID Number: 10176747
Manufacturer Communication Number: SF576REV3
TSB/Document Date: 2020-06-26
Summary
Revised Field Service Campaign sent out to customers to fix Common Telematics Platform (cTP), and Truck Data Center (TDC) communication issues. Certain vehicles built with DTNA's proprietary Common Telematics Platform (CTP), and Truck Data Center (TDC) are not communicating or have outdated software that cannot be updated and, therefore, are unable to benefit from over-the-air software updates.
Daimler Trucks![]()
North America LLC
Field Service Campaign
June 2020
SF576A-H
THIRD REVISED NOTICE
Subject: Freightliner
Cascadia CTP/TDC Update
Models Affected: Specific Freightliner
Cascadia vehicles manufactured January 18, 2017, through April, 17, 2018, and equipped with
DTNA CTP/TDC proprietary telematics.
General Information
Daimler Trucks
North America LLC (DTNA), on behalf of its Freightliner
Trucks Division, is initiating Field
Service Campaign SF576 to modify the vehicles mentioned above.
Certain vehicles built with DTNA’s proprietary Common Telematics Platform (CTP), and Truck Data Center
(TDC) are not communicating or have outdated software that cannot be updated and, therefore, are unable to
benefit from over-the-air software updates.
The CTP module and, when needed, the antennas will be replaced. Software levels on CTP module will be
verified and updated as required, and parameters set to support new features.
There are approximately 2,800 vehicles involved.
REVISION: New campaign groups have been added, the SRTs have been updated, the termination date has
been extended, and the work instructions have been updated to include an initialization.
Additional Repairs
Dealers must complete all outstanding field service campaigns prior to the sale or delivery of a vehicle. A
Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale
or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a
reasonable time after receiving notification.
Please contact Warranty Campaigns for consideration of additional charges prior to performing the repair.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a
completion sticker (Form WAR261).
Replacement Parts
Replacement parts are now available and can be obtained by ordering the part number(s) listed below from
your facing Parts Distribution Center.
If our records show your dealership has ordered any vehicle(s) involved in campaign SF576, a list of the
customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when
ordering parts for this campaign.
Table 1 - Replacement Parts for SF576
Campaign Number
Part Description
Part Number
Qty.
SF576A
HARDWARE-DTNA,CTP,MID,CUST
DTNA HARDWARE-CTP,4G,CUST
ANTENNA-GSM/GNSS,INTR MT,4G
DTNA HARDWARE-CTP,4G,CUST
ANTENNA-GSM/GNSS,INTR MT,4G
66-05466-001
66-13928-001
66-03942-002
66-13928-001
66-03942-002
1
1
1
1
1
SF576B, C, F
SF576D, G
SF576E
Table 1 continued on pg. 2
Page 1
ea
ea
ea
ea
ea
Daimler Trucks![]()
North America LLC
Field Service Campaign
June 2020
SF576A-H
THIRD REVISED NOTICE
Campaign Number
Part Description
Part Number
DTNA HARDWARE-CTP,4G,CUST
66-13928-001
Qty.
1 ea
SF576H
ANTENNA-GSM/GNSS,INTR MT,4G
66-03942-002
1 ea
SF576A-H
ANTENNA-CABLE,WIFI/BT,INT
BLANK COMPLETION STICKER
A66-12157-000
WAR261
1 ea
1 ea
Table 1
Removed Parts
U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the
disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised.
Labor Allowance
Table 2 - Labor Allowance
Time Allowed
(hours)
SRT Code
Corrective Action
Replace, update, and initialize CTP module
Replace, update, and initialize CTP module
and GSM/GPS Antenna
1.0
996-F024A
12-Repair Recall/Campaign
1.9
996-F024B
12-Repair Recall/Campaign
Update GSM/GPS antenna
Replace, update, and initialize CTP module,
and install GSM/GPS antenna and WIFI/BT
antenna
1.2
996-F024C
12-Repair Recall/Campaign
2.0
996-F024D
12-Repair Recall/Campaign
Campaign
Number
SF576A, D, G
SF576B, C, F
SF576E
SF576H
Procedure
Table 2
IMPORTANT: When the campaign has been completed, locate the base completion label in the appropriate location on the vehicle, and attach the gray completion sticker provided in the field service kit (Form WAR261). If
the vehicle does not have a base completion label, clean a spot on the appropriate location of the vehicle and
first attach the base completion label (Form WAR259). If a field service kit is not required or there is no completion sticker in the kit, write the campaign number on a blank sticker and attach it to the base completion label.
Claims for Credit
You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting
your claim through the Warranty system within 30 days of completing this campaign. Please reference the
following information in OWL:
• Claim type is Field Service Campaign.
• In the Campaign field, enter the campaign number and appropriate group (SF576-A, SF576-B, etc.).
• In the Primary Failed Part field, enter 25-SF576-000.
• In the Parts section, enter the appropriate part number(s) as shown in the Replacement Parts Table.
• In the Labor section, enter the appropriate SRT from the Labor Allowance Table. Administrative time will
be included automatically as SRT 939-6010A for 0.3 hours.
• The VMRS Component Code is 036-009-001 and the Cause Code is A1 - Campaign.
• This Field Service Campaign will terminate on December 31, 2021. Dealers will be notified of any
changes to the termination date via Important Campaign Information Letter posted on DTNAConnect.com.
IMPORTANT: OWL must be viewed prior to beginning work to ensure the vehicle is involved and the campaign
has not previously been completed. Also, check for a completion sticker before beginning work.
Page 2
Daimler Trucks![]()
North America LLC
Field Service Campaign
June 2020
SF576A-H
THIRD REVISED NOTICE
All claims must be submitted within 30 days of the repair and within 30 days of the termination date of the
campaign. U.S. and Canadian Dealers: All excess inventory to be returned to the PDC following the conclusion
of the campaign must be returned in resaleable condition to the Memphis PDC within 90 days from the
termination date. Please submit a PAR to request return to the Memphis PDC. (Canadian dealers should return
the kits to their facing PDC.) Export Distributors: Excess inventory is not returnable.
For questions, U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at
DTNAConnect.com / WSC, or the Customer Assistance Center at (800) 385-4357, after normal business hours,
if you have any questions or need additional information. Export distributors submit a Web inquiry or contact
your International
Service Manager.
Page 3
Daimler Trucks![]()
North America LLC
Field Service Campaign
June 2020
SF576A-H
Copy of Notice to Owners - SF576A-D, F, G, H
Subject: Freightliner
Cascadia CTP/TDC Update
Daimler Trucks
North America LLC (DTNA), on behalf of its Freightliner
Trucks Division, is initiating Field
Service Campaign SF576A-H to modify Specific Freightliner
Cascadia vehicles manufactured
January 18, 2018,, through April 17, 2018., and equipped with DTNA proprietary Common Telematics Platform
(CTP), and Truck Data Center (TDC).
Certain vehicles built with DTNA’s proprietary CTP, and TDC are not communicating or have outdated software
that cannot be updated and, therefore, are unable to benefit from over-the-air software updates.
The CTP module and, when needed, antennas will be replaced. Software levels on CTP module will be verified
and updated as required, and parameters set to support new features.
Please contact an authorized Daimler Trucks
North America dealer to arrange to have the campaign performed
and to ensure that parts are available at the dealership. To locate an authorized dealer, go online to
www.Daimler-TrucksNorhAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and
select the appropriate brand. The campaign will take approximately one to two hours, depending on the work
needed, and will be performed at no charge to you.
This Field Service Campaign will terminate on December 31, 2021. Please make sure the campaign is
completed prior to this date. Work completed after this date will be done at the customer’s expense.
As stated in the terms of your express limited warranty, Daimler Trucks
North America LLC will not pay for any
damage caused by failure to properly maintain your vehicle. Daimler Trucks
North America LLC considers the
work necessary under this campaign to be proper maintenance and will, therefore, not pay for any damage to
your vehicle caused by your failure to have the repairs that are the subject of this campaign performed in a
reasonable time.
Contact the Warranty Campaigns Department at (800) 547-0712, from 7:00 a.m. to 4:00 p.m. Pacific Time,
Monday through Friday, e-mail address [email protected], or the Customer Assistance
Center at (800) 385-4357, after normal business hours, if you have any questions or need additional
information.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Page 4
Daimler Trucks![]()
North America LLC
Field Service Campaign
July 2019
SF576A-H
Copy of Notice to Owners - SF576E
Subject: Freightliner
Cascadia CTP/TDC Update
Daimler Trucks
North America LLC (DTNA), on behalf of its Freightliner
Trucks Division, is initiating Field
Service Campaign SF576A-H to modify Specific Freightliner
Cascadia vehicles manufactured
January 18, 2018,, through April 17, 2018., and equipped with DTNA proprietary Common Telematics Platform
(CTP), and Truck Data Center (TDC).
Certain vehicles built with DTNA’s proprietary CTP, and TDC are not communicating and, therefore, are unable
to benefit from over-the-air software updates.
A new antenna will be installed on the updated CTP module installed in your vehicle as part of campaign
SF576A. Software levels on the CTP module will be verified and updated as required and parameters will be
set to support new features.
Please contact an authorized Daimler Trucks
North America dealer to arrange to have the campaign performed
and to ensure that parts are available at the dealership. To locate an authorized dealer, go online to
www.Daimler-TrucksNorhAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and
select the appropriate brand. The campaign will take approximately one to two hours, depending on the work
needed, and will be performed at no charge to you.
This Field Service Campaign will terminate on February 29, 2020. Please make sure the campaign is
completed prior to this date. Work completed after this date will be done at the customer’s expense.
As stated in the terms of your express limited warranty, Daimler Trucks
North America LLC will not pay for any
damage caused by failure to properly maintain your vehicle. Daimler Trucks
North America LLC considers the
work necessary under this campaign to be proper maintenance and will, therefore, not pay for any damage to
your vehicle caused by your failure to have the repairs that are the subject of this campaign performed in a
reasonable time.
Contact the Warranty Campaigns Department at (800) 547-0712, from 7:00 a.m. to 4:00 p.m. Pacific Time,
Monday through Friday, e-mail address [email protected], or the Customer Assistance
Center at (800) 385-4357, after normal business hours, if you have any questions or need additional
information.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Page 5
Daimler Trucks![]()
North America LLC
Field Service Campaign
June 2020
SF576A-H
Third Revised Notice
Work Instructions
Subject: Freightliner
Cascadia CTP/TDC Update
Models Affected: Specific Freightliner
Cascadia vehicles manufactured January 18, 2017, through April, 17, 2018, and equipped with
DTNA CTP/TDC proprietary telematics.
REVISION: New campaign groups have been added, the SRTs have been updated, the termination date has
been extended, and work instructions have been updated to include an initialization.
General Information
Population
SF576A
SF576D
SF576G
SF576B
SF576C
SF576F
SF576E
SF576H
Procedures
• CTP Replacement and initialization
• CTP Replacement and initialization
• 3G GSM/GPS Antenna Replacement
• 3G GSM/GPS Antenna Replacement only; page 11
• CTP Replacement and initialization
• 3G GSM/GPS Antenna Replacement
• WiFi Antenna Installation
CTP Replacement and Initialization
NOTICE
DiagnosticLink 8.12 or newer, is required to complete this procedure, as well as a reliable internet
connection. The procedure cannot be performed offline. The loss of internet connection may result in
failure of the CTP activation.
1.
Inspect the base label (Form WAR259) for a campaign completion sticker for SF576 (Form WAR261). If a
sticker is present for campaign SF576, no work is needed. If there is no sticker, proceed with the steps
below.
2.
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SF576REV3
Replacement Service Bulletin Number:
MFR Communication Date: 2020-06-25
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: COMMUNICATION
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA
AutoAuth access for Chrysler
, Jeep
, Dodge
, and Fiat
(2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA
AutoAuth account is not included with the device. Users must register and pay separately through the official FCA
AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




