NHTSA ID Number: 10176499
Manufacturer Communication Number: ZKG_Dealer_Lette
TSB/Document Date: 2020-06-22
Summary
DL: Toyota
has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
◄ IMPORTANT UPDATE ►
The attached Dealer Letter has been updated. Refer to the details below.
DATE
May 15, 2020
December 12, 2019
TOPIC
• Toyota has added approximately 31,500 vehicles to the covered vehicles
population
• The training requirements section has been updated to include Toyota Certified
Collision Centers
• A policy regarding the labor rate for body and paint work has been added
This document has been updated to clarify that only authorized Toyota dealerships
are authorized to confirm if the paint peeling condition is covered by this program.
However, after confirming that the paint peeling condition is covered by this
program, the authorized Toyota dealership may choose to coordinate to have the
repainting repair performed by a non-Toyota repair facility (e.g. third-party
collision repair facility, body shop, etc)
Note that as of May 15, 2020, Toyota Certified Collision Centers are now permitted
to confirm if the peeling condition is covered by this program. Review the Dealer
Letter for detailed information, polices, and training requirements.
The most recent update in the attached Dealer Letter will be highlighted with a red box.
Please review this notification with your staff to assure that all relevant personnel have been briefed regarding
this subject.
Thank you for your cooperation.
© 2019 Toyota Motor Sales, USA
Toyota Motor Sales, USA, Inc.
6565 Headquarters Drive
Plano, TX 75024
(469) 292-4000
Original Publication Date: December 4, 2019
To:
All Toyota Dealer Principals, General Managers, Service Managers, and Parts Managers
CUSTOMER SUPPORT PROGRAM ZKG
Multiple Models and Model Years
Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color
Coverage for Peeling of Factory-Applied Paint
Model / Years
2008 – 2015
2008 – 2017
2013 – 2017
2008 – 2017
2008 – 2017
2009 – 2019
2008 – 2017
2012 – 2014
2011 – 2015
2008 – 2015
4Runner
Avalon
Avalon Hybrid
Camry
Camry Hybrid
Corolla
RAV 4
RAV 4 EV
Scion iQ
Scion xB
Production Period
Late December 2007 - Late May 2015
Late February 2007 - Late May 2017
Late May 2012 - Late May 2017
Early August 2007 - Late February 2017
Early August 2007 - Late February 2017
Early June 2007 - Late September 2018
Early January 2008 - Early September 2017
Late July 2012 - Late August 2014
Late September 2010 - Late September 2014
Mid-January 2007 – Late December 2015
Approximate Total
Vehicles
73,860
91,560
13,800
574,300
50,230
585,800
332,400
1,110
3,170
44,210
In our continuing efforts to ensure the best in customer satisfaction, Toyota is announcing a Customer Support
Program to provide coverage for peeling of certain colors of factory-applied paint.
Background
Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl
or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied
during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels.
Although the original factory paint is covered by Toyota’s New Vehicle Limited Warranty for 3 years or 36,000
miles (whichever comes first), we at Toyota care about the customers’ ownership experience. Toyota is
providing coverage for repairs related to the condition described above.
The following information is provided to inform you and your staff of the program notification schedule and
your degree of involvement.
© 2019 Toyota Motor Sales, USA
Customer Support Program ZKG - D - Page |2
Customer Support Program Coverage Details
This Customer Support Program provides coverage for involved vehicles with the original factory Blizzard
Pearl or Super White paint. The covered condition may occur when sunlight over time degrades the
adhesion between the factory-applied paint primer coat layer and the base metal electrodeposition layer
causing the paint to peel from the metal body panel. If the condition is verified, the specific panel affected
will be repainted.
•
The Primary Coverage will be offered until December 11, 2022, regardless of mileage.
•
After the Primary Coverage, the Secondary Coverage is applicable for 10 years from the date of
first use, regardless of mileage.
Note:
Damage to the vehicle exterior (such as collision damage, deep scratches, dents, etc..) may prevent a repair
facility from performing the paint repair covered by this Customer Support Program.
This Customer Support Program does not cover repair of such damage.
If any damage must be repaired prior to performing the paint repair covered by this Customer Support
Program, the dealer may offer to repair the damage at the customer’s expense.
Examples of damage that might prevent paint repair are:
• Collision damage.
• Dents.
• Deep scratches.
• Deep rock chips.
This coverage is for work performed at an authorized Toyota dealer only*. It is subject to the same terms and
conditions set forth in the New Vehicle Limited Warranty Section of the Owner’s Warranty Information
booklet.
*Only authorized Toyota dealerships (and Toyota Certified Collision Centers) are authorized to confirm if the
paint peeling condition is covered by this program. However, after confirming that the paint peeling
condition is covered by this program, the authorized Toyota dealership may choose to coordinate to have
the repainting repair performed by a non-Toyota repair facility (e.g. third-party collision repair facility, body
shop, etc.).
Covered Vehicles
There are now approximately 1,770,440 vehicles covered by this Customer Support Program. There are
approximately 29,900 vehicles covered by this Customer Support Program that were distributed to Puerto
Rico.
Customer Support Program ZKG - D - Page |3
Program Phase Schedule
Toyota is administering this program in multiple phases.
Phase 1 – Customer Notification
In the interest of customer satisfaction, Toyota first notified owners via first class mail between late
August 2019 and mid-September 2019 about this program, provided a process for reimbursing out of
pocket expenses associated with this condition incurred prior to September 26, 2019, informed owners
that Toyota is working on the repair for their vehicle, and that they will be re-notified when the repair
becomes available.
Phase 2 – Repair Available and Customer Re-notification
In early December 2019 Toyota launched the repair portion of this program. Toyota started re-notifying
the owners involved in phase 1 regarding the availability of the repair in late December 2019.
Phase 3 – Approximately 31,500 vehicles are added to this Customer Support Program
In mid-May 2020, Toyota added approximately 31,500 vehicles to this Customer Support Program and
the repair is available for these vehicles. Refer to the table below for a summary of the added vehicles.
Model / Years
2008 Avalon
2008 - 2009 Camry
2008 Camry Hybrid
2008 Corolla
Production Period
Late February 2007 – Late December 2007
Early August 2007 – Late December 2007
Early August 2007 – Late December 2007
Early June 2007 – mid-December 2007
Approximate Total Vehicles
5,000
18,600
2,800
5,100
Owner Letter Mailing Date
Refer to the table below for the owner letter mailing period.
Description
Phase 1
Phase 2
Phase 3
Letter Mailing Period
Late August 2019 – mid-September 2019
Mailing started in late December 2019
Early August 2020
© 2019 Toyota Motor Sales, USA
Attached Sample
Sample A
Sample B
Sample C
Customer Support Program ZKG - D - Page |4
Customer Handling, Parts Ordering, and Remedy Procedures
Customer Contacts
Customers who receive the owner letter may contact your dealership with questions regarding the letter
and/or the Customer Support Program. Please welcome them to your dealership and answer any questions
that they may have. A Q&A is provided to assure a consistent message is communicated.
Customers with additional questions or concerns are asked to please contact the Toyota Customer Experience
Center (1-888-270-9371) - Monday through Friday, 7:00 am to 7:00 pm, Saturday 7:00 am to 4:30 pm Central
Time.
Customer Marketing
Direct marketing of this Customer Support Program is strictly prohibited pursuant to the Toyota Warranty
Policy 5.21, “Warranty Solicitation.” Non-compliance of this policy may result in a claim debit.
Media Contacts
It is imperative that all media contacts (local and national) receive a consistent message. In this regard, all
media contacts must be directed to Tania Saldana (859) 815-9968 in Toyota Corporate Communications.
Please do not provide this number to customers. Please provide this contact only to media.
Parts Ordering Process - Non SET and GST Parts Ordering Process
The repair for this customer support program involves re-painting the area of the vehicle exterior affected by
the condition and; therefore, may involve replacing non-reusable parts such as emblems, clips/retainers,
windshield glass adhesive, etc.
Any parts replaced under this program must be*:
1. Toyota Genuine Parts.
2. Must be included in the parts section of the warranty claim.
*This does not apply to refinishing products and surface preparation products such as paints, primers, sand
paper, metal conditioner, etc..
As this is a Customer Support Program, the condition MUST be verified by inspecting the vehicle. Therefore,
dealers SHOULD NOT increase their stock of related repair parts. Dealers are requested to only order parts for
vehicles experiencing this condition once verified. DO NOT ORDER FOR STOCK. As always, if a customer
experiences the condition described, dealers should conduct appropriate diagnosis and order the applicable
parts.
It is possible that some of the parts necessary for performing this campaign are either required to be ordered
in Campaign Part Order Request (CPOR) on Service Lane, or have been placed on Manual Allocation Control
(MAC) due to potential limited part availability. Please check the CPOR/MAC report on Dealer Daily for the
most up-to-date parts ordering information.
Customer Support Program ZKG - D - Page |5
Training Requirements
The following training requirements are only applicable to the personnel performing T-SB-0162-19 or S-SB0004-19. T-SB-0162-19 (Toyota) or S-SB-0004-19 (Scion) contains the process used to confirm if the vehicle’s
paint peeling is applicable to this program. These training requirements are not applicable to the other steps
in the ZKG process such as completing the mandatory website photo upload process, repairing/refinishing
the vehicle, etc. Only authorized Toyota dealerships and Toyota Certified Collision Centers are authorized to
perform the condition confirmation inspection included in T-SB-0162-19 or S-SB-0004-19.
Training Requirements: Authorized Toyota Dealership
All Toyota dealership staff performing T-SB-0162-19 or S-SB-0004-19 are required to successfully
complete the most current version of the E-Learning course “Toyota Recall and Service Campaign
Essentials” (course number SC19A). To ensure that T-SB-0162-19 or S-SB-0004-19 is performed
correctly; Toyota dealership staff performing T-SB-0162-19 or S-SB-0004-19 are required to currently
hold at least one of the following certification levels:
•
•
•
•
Certified Technician any Specialty
Expert Technician any Specialty
Master Technician
Master Diagnostic Technician
Always check which technicians can perform T-SB-0162-19 or S-SB-0004-19. It is the dealership’s
responsibility to select staff with the above certification level or greater to perform T-SB-0162-19 or SSB-0004-19.
Training Requirements: Toyota Certified Collision Center
All Toyota Certified Collision Center staff members performing T-SB-0162-19 or S-SB-0004-19 are
required to successfully complete the most current version of the E-Learning course “Toyota Recall
and Service Campaign Essentials” (course number SC19A). To ensure that T-SB-0162-19 or S-SB-000419 is performed correctly; Toyota Certified Collision Center staff members performing T-SB-0162-19 or
S-SB-0004-19 are required to currently hold at least one of the following certification levels:
• Certified Refinish Technician
• Master Refinish Technician
Always check which technicians can perform T-SB-0162-19 or S-SB-0004-19. It is the Collision Center’s
responsibility to select staff with the above certification level or greater to perform T-SB-0162-19 or SSB-0004-19.
© 2019 Toyota Motor Sales, USA
Customer Support Program ZKG - D - Page |6
Remedy Procedures
Refer to the Technical Instructions on TIS for complete remedy procedure instructions including:
1. Verifying if the paint condition is covered by this Customer Support Program (T-SB-0162-19 or S-SB0004-19).
2. Ensuring there is no damage that requires repair prior to performing the Customer Support Program
repair
3. Uploading mandatory photographs to the web application
4. Confirming that the preliminary estimate from the body shop has been pre-approved by Toyota
5. Coordinating repair of the vehicle at a body shop
6. Ensuring the body shop is provided with, and follows, the Customer Support Program ZKG Paint Repair
Process
Non-Toyota Certified Repair Facility
After your dealership (or Toyota Certified Collision Center) has confirmed that the condition is covered by this
program by following T-SB-0162-19 or S-SB-0004-19, and the website has issued a warranty pre-approval
code, your dealership may sublet the repainting repair to a non-Toyota certified repair facility (third-party
collision repair facility, body shop, etc.). A Toyota Certified Collision Center is not required to perform the
repainting repair.
Parts Recovery Procedures
All parts replaced as part of this Customer Support Program must be turned over to the parts department
until appropriate disposition is determined. The parts department must retain these parts until notification via
the Parts Recovery System (PRS) is received indicating whether to ship or scrap the parts. These parts are
utilized by various departments for defect analysis, quality control analysis, product evaluation, as well as
other purposes.
To help minimize dealer storage challenges, Toyota recommends that dealers:
• File the campaign claim accurately and promptly. The time a dealer is required to hold parts is based on
when the campaign claim is paid by Toyota.
• Monitor the Warranty Parts Recovery Notifications and Part Scrap Report regularly.
Refer to Warranty Policies 9.3 and 9.6 for additional details.
Customer Support Program ZKG - D - Page |7
Warranty Reimbursement Procedures
Verify Vehicle Eligibility
Check TIS Vehicle
Did Inquiry System
to verify vehicle eligibility
Not Covered
No further action required
Covered
Confirm that paint condition is
covered.
Not Covered
Follow the inspection procedure
in T-SB-0162-19 (Toyota) or
S-SB-0004-19 (Scion).
Confirm if any vehicle
damage may prevent
paint repairs
Damage
Inform customer that body shop may
not be able to perform the CSP until
the damage is repaired at the
Customer’s expense
No damage
Upload photos of peeling
panel(s) to website.
Additional panels found
peeling during repair?
Obtain preliminary estimate
from body shop.
Remember to share the Customer
Support Program ZKG Paint Repair
Process to the body shop
Input estimate details
(labor hours, etc..)
into the website for approval
Not approved
(rejected)
Follow the tips in the website for
getting the estimate approved
Approved
Ensure Customer Support
Program ZKG Paint Repair
Process has been shared to
body shop
Repair vehicle.
Vehicle is authorized to receive repair
under ZKG (warranty pre-approval
code is issued by website).
Return vehicle to customer.
Op Code
ZKG001
Description
Repaint the affected panel(s)
Flat Rate Hours
0.3
A “warranty pre-approval code” must be issued by the website prior to authorizing any repairs. Include the
code in the CCR of the claim. This warranty pre-approval code is not a guarantee for payment of the claim. All
ZKG claims are subject to warranty department review for proper claim submission and compliance with
Toyota Warranty Policy and Procedures including Policies 8.22 and 4.12.
•
The flat rate time includes 0.3 hours for administrative cost per unit for the dealership which includes the
administrative time to upload photos and body shop preliminary estimate details to the website.
© 2019 Toyota Motor Sales, USA
Customer Support Program ZKG - D - Page |8
Sublet:
• The total cost of the final invoice from the body shop should be included in the sublet section as sublet
type “PT”. A copy of the invoice is required to be attached.
• DO NOT include the actual cost of parts in the sublet section. The actual cost of parts should be subtracted
from the sublet bill if they are included in the body shop’s final invoice. Parts should ONLY be claimed in
the parts section of the warranty claim.
• In the very rare case that your dealership was required to use the damp cloth confirmation procedure
described in T-SB-0162-19 (Toyota) or S-SB-0004-19 (Scion), claim the cost under sublet type “ZZ” using
the following formula: 0.3 hours x Dealer Hourly Warranty Labor Rate x the number of panels where the
condition was confirmed using the damp cloth confirmation procedure. Photos must be attached to the
claim showing that the condition exists after the damp cloth confirmation.
Labor Rate for Body and Paint Work:
As provided in Policy 8.22, a dealership’s service department mechanical rate may not be used for the body
and paint work performed under ZKG. If the work is performed by the dealership’s own body shop, the labor
rate used for calculation of labor charges must be the posted body shop labor rate, not the service
department’s mechanical rate. If the work is performed as a sublet by an independent body shop, as provided
in Policy 4.12, the sublet repair shop’s invoice must include the reasonable and customary repair shop rate,
not the dealership’s service department rate.
Important Note: As provided in Policy 5.3, pre-authorization is required to submit a claim for paint repairs
exceeding $1,000, or as required in any Policy or Procedure. For ZKG work, this pre-authorization is obtained
at the ZKG website (“warranty pre-approval code”) by a dealer submitting a preliminary estimate and photos.
As provided in Policy 5.3, this authorization to submit a claim is not a guarantee for payment of the claim,
which is subject to Toyota’s review, including proper claim submission and compliance with Toyota Warranty
Policy and Procedures. In addition, a dealer claim for the work must follow the labor rate policies described
in this Dealer Letter and Toyota Warranty Policy and Procedures.
Customer Support Program ZKG - D - Page |9
Loaner Vehicle Reimbursement Procedure
The cost of providing a loaner vehicle for the period that the vehicle is undergoing repairs though Toyota
Rent-A-Car (TRAC) may be claimed at a maximum rate of $35.00 per day as sublet type “RT”. The maximum
allowable claimable days should follow the table below.
Total “Body” + “Paint” Labor Hours from
Body Shop Invoice
0-3
4-8
9-16
17-24
25-32
33-40
41-48
49-56
57-64
65-72
73-80
81-88
89-96
97-104
105-112
113-120
•
•
Maximum Claimable Loaner Vehicle Days
0
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
For rentals that exceed the maximum number of allowable days and/or dollars per day, refer to the Toyota
Transportation Assistance Policy (TTAP) for DSPM authorization requirements.
Rental invoice MUST be attached to all rental claims. These claims may be subject to debit if rental invoice
is not attached.
Customer Reimbursement
Reimbursement consideration instructions will be included in the owner letter.
Thank you for your cooperation.
TOYOTA MOTOR SALES, U.S.A., INC.
© 2019 Toyota Motor Sales, USA
CUSTOMER SUPPORT PROGRAM ZKG
Multiple Models and Model Years
Vehicles Painted with Blizzard Pearl (070) or Super White (040) Paint Color
Coverage for Peeling of Factory-Applied Paint
Frequently Asked Questions
Original Publication Date: December 4, 2019
◄ IMPORTANT UPDATE ►
DATE
May 15, 2020
December 12, 2019
TOPIC
• Toyota has added approximately 31,500 vehicles to the covered vehicles
population.
• Q/A #11 has been updated regarding vehicles that have been added to this
Customer Support Program
This document has been updated to clarify that only authorized Toyota dealerships
are authorized to confirm if the paint peeling condition is covered by this program.
However, after confirming that the paint peeling condition is covered by this
program, the authorized Toyota dealership may choose to coordinate to have the
repainting repair performed by a non-Toyota repair facility (e.g. third-party collision
repair facility, body shop, etc).
Note that as of May 15, 2020, Toyota Certified Collision Centers are now permitted
to confirm if the paint peeling condition is covered by this program. Review the
Dealer Letter for detailed information, polices, and training requirements.
The most recent update will be highlighted with a red box.
Q1:
A1:
What is the condition?
Toyota has received reports of paint peeling on certain vehicles with the original factory-applied
Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint
colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior
metal body panels.
Q1a:
What specific paint colors are affected by this condition?
A1a:
The vehicles involved in this program were factory-painted with Blizzard Pearl (Toyota paint
code 070) or Super White (Toyota paint code 040) paint color.
FAQ Page 1 of 6
© 2019 Toyota Motor Sales, USA
Q2:
A2:
Q3:
A3:
What is Toyota going to do?
In early August 2019, Toyota announced the “Customer Notification Phase” of this program. Toyota is
now launching the repair portion of this program
How will owners be notified that the repair is available for their vehicle?
Toyota is administering this program in multiple phases.
Phase 1 – Customer Notification
In the interest of customer satisfaction, Toyota first notified owners via first class mail between late
August 2019 and mid-September 2019 about this program, provided a process for reimbursing out of
pocket expenses associated with this condition incurred prior to September 26, 2019, informed owners
that Toyota is working on the repair for their vehicle, and that they will be re-notified when the repair
becomes available.
Phase 2 – Repair Available and Customer Re-notification
In early December 2019 Toyota launched the repair portion of this program. Toyota started re-notifying
owners involved in phase 1 regarding the availability of the repair in late December 2019.
Phase 3 – Approximately 31,500 vehicles added to this Customer Support Program
In mid-May 2020, Toyota added approximately 31,500 vehicles to this Customer Support Program and
the repair is available for these vehicles. Refer to the table below for a summary of the added vehicles.
Model / Years
2008 Avalon
2008 - 2009 Camry
2008 Camry Hybrid
2008 Corolla
Q4:
A4:
Production Period
Late February 2007 – Late December 2007
Early August 2007 – Late December 2007
Early August 2007 – Late December 2007
Early June 2007 – mid-December 2007
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: ZKG_Dealer_Lette
Replacement Service Bulletin Number:
MFR Communication Date: 2020-05-15
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.