reception affected by weather
conditions or geographic
features such as tunnels or
steep valleys?

Yes, inclement weather, remote locations, enclosed areas, or
underground parking garages can affect your service. Use the radio wave
reception level indications of the communication unit to determine if
your Connected Services reception is being affected. For details on the
system’s limitations, refer to the Terms and Conditions .

Can I use Connected Services
as normal during an app
update?

It may not be possible to use certain Connected Services functions
during a MyMazda online update.

Troubleshooting

Problem

Solution
1. Check customer phone and vehicle reception strength. Retry when
reception strength is good or strong.
Go to Reception Level Inspection

Vehicle center display does
not provide One Time Pass
Code during the MyMazda
App connected services
enrollment.

2. Connected Services Enrollment step 1/3 "Turn
Ignition ON", wait 30 seconds before you select
"Next" on the phone App.
This allows the communication unit time to
connect.
NOTE: Vehicles stored for long periods may loose GPS
clock sychronization. If the vehicle is stored for a long
period, test drive the vehicle to give the GPS clock time
to sychronize before enrolling.

Page 14 of 20
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc

Service Alert No.: SA-007/20

Remote function(s)
inoperative.
1. Engine Start / Stop
2. Door Lock / Unlock
3. Lights ON / OFF

Last Issued: 05/18/2020

1. Check customer phone and vehicle reception strength. Retry
when reception strength is good or strong.
Go to Reception Level Inspection
2. Check for DTC(s) stored. If stored, clear/repair DTC(s) and then
retry.
NOTE: Vehicles stored for long periods may loose GPS clock sychronization.
If the vehicle is stored for a long period, test drive the vehicle to give the
GPS clock time to sychronize before testing connected vehicle functions .
To regain access to Connected Services, follow
these steps:
1. What vehicle do you have?a. 2020 CX-30
2. Have you downloaded the MyMazda app and
registered for an account? If not:a. If you have an
iOS device (iPhone, iPad), download the MyMazda
app from the App Store. The device must be
running iOS 9.0 or newer.

I can’t access Connected
Services via MyMazda app.

b. If you have an Android device, download the
MyMazda app from Google Play Store. The device must
be running Android 7.0 or newer.
3. Have you already enrolled in Connected Services?
4. If you aren’t enrolled in Connected Services, follow the
enrollment process. Download the MyMazda app from
the app store, if necessary.
Note to CEC/Tech Hotline/Dealer: If the customer is
enrolled in Connected Services, follow incident
management protocol.

If you are unable to access the in-car Wi-Fi hotspot, follow these
steps:
1. See if your device’s Wi-Fi access is turned on.
2. Make sure your vehicle is running or in accessory mode.
3. You can follow the steps below to find your Wi-Fi network
name:a. Select Settings from the Mazda Connect home screen.
I can’t access the in-car Wib. Select Connectivity Settings.
Fi hotspot.
c. Select Wi-Fi Settings.
d. Select SSID (Access Point Name).
e. Find the SSID on your device, then select it.
4. Now follow the steps below to find your Wi-Fi network password:
a. Select Settings from the Mazda Connect home screen.
b. Select Connectivity Settings.
Page 15 of 20
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc

Service Alert No.: SA-007/20

Last Issued: 05/18/2020

c. Select Wi-Fi Settings.
d. Select Wi-Fi Password.
e. Enter the password displayed on the device to connect to the Wi-Fi
network.
You can only make one (1) remote request within a 60-second period. For
I made multiple remote
example, if you accidently made a “remote unlock” request and now want
service requests within a 60to send a “remote lock” request, you will have to wait at least 60 seconds
second period.
before you can make the second request.
I didn’t use the vehicle for a
Simply drive the vehicle as normal for a few miles and Connected Services
week, and now I can’t access
should start working again.
Connected Services.
I left my key in the vehicle.
No, you will see a “Fail” error message upon making a remote service
Can I still use Connected
request (e.g., remote engine start) if you leave the key in the vehicle. The
Services, like remote engine
key must be kept outside the vehicle to execute remote services.
start?
I am locked out from the
app after failing to log in a
few consecutive times.

If you have made five (5) failed login attempts, you must wait five (5)
minutes before you can attempt to log in again.

The Remote Control
lock/unlock function isn’t
working.

Double-check your vehicle. The lock/unlock function will not work if the
engine is running, the key is left inside the vehicle or any of the doors are
opened.

I used Remote Engine Start,
but when I opened the door When Remote Engine Start is used, the engine will turn off when any of the
to my vehicle, the engine
doors are opened.
turned off.
MyMazda App remote functions can be restricted by switching to
Restricted Transmitting Mode.
1. Restricts MyMazda App remote functions.
How do I block MyMazda
2. Prevents error messages being sent to the customer during vehicle
App remote functions when
service.
vehicle is being serviced?
Cancel Restricted Transmitting Mode after completing vehicle service.
Go to MGSS SERVICE CAUTIONS FOR VEHICLES WITH TELEMATICS
COMMUNICATION SYSTEM [(US)].
Engine turns off a few
seconds after remote engine Possible Powertrain DTC's stored. Repair DTC's and then retry.
start

Page 16 of 20
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc

Service Alert No.: SA-007/20

Last Issued: 05/18/2020

Reception Level Inspection

Indication

Explanation
Radio waves are not being received. Move to a location with good reception.
Weak reception.
Good reception.
Strong reception.
Currently conducting an operation check of the communication unit. If this condition
continues, consult an Authorized Mazda Dealer.
The communication unit is unsubscribed or a Connected Service contract has been ended.

Dealer Processes

Is there an
opportunity at
PDI to test the
system?

No special action is required to activate at PDI other than the room fuse installation,
which is already part of the current PDI. We recommend checking for signal after
installing room fuse. See the image below for how the connectivity signal bar looks
(it's the vertical stack bar on the right bottom corner). This connectivity signal bar is
not displayed on the "Home" screen, so the PDI Inspector would have to go into the
"Entertainment" or "Navigation" menu to check it. To confirm it is working properly,
the bar should be white like the image below.

Page 17 of 20
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc

Service Alert No.: SA-007/20

Last Issued: 05/18/2020

The handbook
states that a
“moderate
If an airbag is deployed.
collision” will dial
911. Please define
“moderate.”
Will the customer
have to sign a
disclaimer for a
loaner vehicle
that has
Connected
Services
activated?

If the customer is downloading the MyMazda app to use the Connected Services
functions, they will sign the disclaimer as part of the MyMazda process. If the
customer is not downloading the app but the dealer has set it up for their own
purposes (e.g., vehicle location), then it is the dealer's responsibility to disclose to the
customer.

Remote Engine Start Will Not Function under the following conditions

Item

Condition

1

Vehicle battery voltage low

2

AT shift position except "P"

3

Vehicle speed above 3 mi/h (5 km/h)

4

Brake pedal switch malfunction

5

Engine already started by remote engine start function

6

A registered key is detected in the vehicle

7

Brake pedal switch detects brake application

8

Low fuel warning message

9

Engine starts, then turns OFF due to abnormal high engine rpm detected. (Engine rotation over
3000 rpm continued for more than 0.2[s])
Page 18 of 20

CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc

Service Alert No.: SA-007/20

Last Issued: 05/18/2020

10

No engine rpm detected after sending engine start request. (Engine rotation 0 rpm continued for
more than 0.2[s])

11

When the CAN data signal for engine shut off is present (e.g.: door ajar signal)

12

After 10 second maximum cranking time

13

Burglar alarm status is "Alarm" and "Alarm stand by" (CAUTION - DO NOT enable, see TheftDeterrent System section in SA-013/20)

14

Room fuse blown/missing

15

Connected Vehicle Maintenance Mode enabled (Restricted Transmitting Mode in MDARS)

16

Vehicle is parked (stored) for approximately 1 week or longer or in deep sleep mode.
Drive the vehicle for a few miles to recover.

17

DTC stored

Remote Engine Start Function Will turn engine OFF under the following conditions

Item

Condition

1

Vehicle door(s) opened

2

Vehicle trunk opened

3

Vehicle hood opened

4

Ignition switch push button "ON" detected

5

Remote engine STOP request

6

Brake pedal switch detects brake application

7

DTC stored

8

After 15 minute run time limitation

Page 19 of 20
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc

Service Alert No.: SA-007/20

Last Issued: 05/18/2020

Educational Videos
OverviewMyMazda remote
Using MyMazda App
Vehicle Health Notifications
In-car Wi-Fi
Saftey features
Resources
Connected Services Owner's Manual
MAZDA CONNECT and MAZDA CONNECTED SERVICES User Guide (see attachment)
MAZDA CONNECTED VEHICLE VIEWER (see attachment)
SA-031/20 - CONNECTED VEHICLE SYMPTOM TROUBLESHOOTING
SA-052/20 - CONNECTED VEHICLE MAINTENANCE MODE

Page 20 of 20
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.

© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:39 AM tlawrenc