NHTSA ID Number: 10176056
Manufacturer Communication Number: Circular93F1REV2
TSB/Document Date: 2020-06-04
Summary
It is possible that the high-voltage battery
housing bonded seam was made in a non-optimal position. If this condition is present, moisture can enter the high-voltage battery housing. The driver may be alerted to this condition by the illumination of a high-voltage system warning indicator on the instrument cluster display. Updated claiming and work instructions in the event the coolant expansion tank is damaged.
tester -VAG1397A/B-.
If pressure drop does not exceed 0.020 bar
after 10 minutes, then the cooling system is
OK.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 79 of 96
Appendix C – -VAS6911/3A- Adapter Self-Test
This test ensures the -VAS6911/3A- does
not leak.
Test can be done with either -VAS1397A- or
-VAS1397B-.
-VAS1397B- shown.
Using VAG1397A:
o
Attach connection A of
-VAS691005/1- to connection II on
turbocharger tester -VAG1397A-.
Using VAG1397B:
o
Attach connection A of
-VAS691005/1- to connection II on
turbocharger tester -VAG1397B-.
Connect connection C of -VAS691005/1- to
hand pump -VAG1274B-.
Open cut-off valves A and C on
-VAS691005/1-.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 80 of 96
Using -VAG1397A-:
o
Turn
on
turbocharger
-VAG1397A-.
o
Select setting II .
tester
Using -VAG1397B-:
o
Turn
on
turbocharger
-VAG1397B-.
o
Press the menu button until the
relative pressure setting (P-rel) is
displayed .
o
Wait approximately 30 seconds for
tester to calibrate.
o
Display will then read 0.000.
tester
CAUTION
Risk of Tool Damage!
Do not exceed 2.99 bar or irreparable damage to
the tool will occur.
No other tools should be attached to the
-VAS691005/1-.
Using hand pump -VAG1274B-, build up
pressure
until
turbocharger
tester
-VAG1397A/B- reads between 0.300 and
0.350 bar (300 - 350 mbar).
Close cut-off
-VAS691005/1-.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 81 of 96
Stabilize
Pressure loss
< 5 mbar = OK
Allow pressure to stabilize for one minute.
After the pressure is stable, wait 30 seconds
and check pressure drop on turbocharger
tester -VAG1397A/B-.
If pressure drop does not exceed 5 mbar after
30 seconds, then the -VAS6911/3A- is OK.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 82 of 96
Appendix D – High-Voltage Battery Acclimation Test
This test ensures the pressure inside the highvoltage battery housing has stabilized. This
will ensure an accurate reading during the
high-voltage battery pressure test.
Do not place any objects on the highvoltage battery.
Leave cut-off valve C open on -VAS691005/1when assembling the tools. Otherwise,
damage to the pressure gauge -VAS611013may occur.
This test must be performed under constant
temperature conditions.
Test block is
-VAS6911/3A- .
Seal pressure equalization openings on
battery housing (top section) with sealing
plugs -VAS6911/15- .
removed
from
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 83 of 96
Pressure
increase < 0.5
mbar = OK
Ensure cut-off valves A and C are open on
-VAS691005/1- when connecting tools.
Attach connection B of the -VAS691005/1- to
the -VAS6911/3A- .
Attach -VAS6911/3A- to the high-voltage
battery connection .
Close cut-off valve C on -VAS691005/1-.
Observe the pressure
-VAS611013- .
After five minutes, the pressure should not
increase by more than 0.5 mbar.
If pressure does increase by more than 0.5
mbar, wait another 5 minutes to allow the
pressure inside the battery housing to
acclimate.
reading
on
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 84 of 96
Appendix E – High-Voltage Battery Pressure Test
This test ensures the high-voltage battery
does not leak.
This test must be performed with pressure
gauge -VAS611013-.
Do not place any objects on the highvoltage battery.
Leave cut-off valve C open on -VAS691005/1when assembling the tools. Otherwise,
damage to the pressure gauge -VAS611013may occur.
This test must be performed under constant
temperature conditions.
Test block is
-VAS6911/3A- .
Ensure the pressure equalization openings on
battery housing (top section) are sealed with
sealing plugs -VAS6911/15- .
removed
from
the
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 85 of 96
Ensure cut-off valves A and C are open on
-VAS691005/1- when connecting tools.
Connect connection C of -VAS691005/1- to
hand pump -VAG1274B-.
Open cut-off valves A and C on
-VAS691005/1-.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 86 of 96
Connection A of -VAS691005/1- is
attached to pressure gauge -VAS611013-.
The -VAS6911/3A- is attached to the highvoltage battery connection .
Connection B of the -VAS691005/1- is
attached to the -VAS6911/3A- .
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 87 of 96
CAUTION
Risk of Tool Damage!
Do not exceed 35
the tool will occur.
Stabilize
mbar or irreparable damage to
Turn on pressure tester -VAS611013-.
Using hand pump -VAG1274B-, build up
pressure until pressure gauge -VAS611013reads 30.1 or 30.2 mbar.
Close cut-off
-VAS691005/1-.
Allow pressure to stabilize for one minute.
valve
C
on
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 88 of 96
After the pressure is stable, wait 10 minutes
and check pressure drop on turbocharger
tester -VAS611013-.
If pressure drop does not exceed 9 mbar after
10 minutes:
o
Pressure loss
< 9 mbar = OK
The high-voltage battery is OK.
If pressure drop exceeds 9 mbar after 10
minutes:
o
Generate pressure as outlined in this
High-voltage battery pressure test.
o
Spray battery housing seams and
other areas with soapy water to find
the leak.
o
The sealing plugs for the pressure
equalization are also locations where
leaks can potentially occur.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 89 of 96
Appendix F – Battery Housing Bolt Torque Sequence
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 90 of 96
Appendix G – A3 Battery Portal Instructions (U.S. Dealers Only)
Register New User Account
1. Navigate to the A3 Battery Recall Portal: https://a3.evbatteryreturns.com/
2. On the Sign In screen, click the New User tab.
3. Complete all required fields and click the Continue button.
4. Enter a unique password, confirm that password and click the Register User button.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 91 of 96
5. After successful registration, you will be sent an email with a link to verify your account email address. NOTE:
You will not be able to log into the portal until after your account has been verified. If you do not receive the
account verification email, be sure to whitelist our domain (evbatteryreturns.com) to prevent emails from being
sent to your spam folder.
Existing User Sign In
1. Navigate to the A3 Battery Recall Portal: https://a3.evbatteryreturns.com/
2. On the Sign In screen, ensure the Existing User tab is selected:
3. Enter the Email and Password used when registering your account and click the Sign In button.
4a. [OPTIONAL] If you cannot remember your password, click the ‘Forgot Password?’ link.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 92 of 96
4b. [OPTIONAL] Ensure your email is entered correctly and click the Reset Password button to send an email
with a link to reset your password. Once reset, you can immediately log in with your new password.
First Portal Login (i.e. Complete Dealership Setup)
1. At first login, you will be asked to finish the setup of your dealership. Click the Complete Setup button.
2. Enter your Dealer No. and Dealer Name into the dialog window. Click the Next button.
3. Enter the primary address from where batteries will be picked up. Click the Submit button.
NOTE: This will set the default pickup address, however, it can be changed at any time.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 93 of 96
Schedule Battery Return Request
1. From the Battery Returns view, click the Schedule Return button.
2. A dialog will be displayed. Confirm the Pickup Address either by selecting an existing address or entering a
new address. Click the Next button.
3. Confirm Contact Information for person responsible for managing the battery return. NOTE: Your user
information will be added by default; but fields can be updated to a more appropriate contact person if necessary.
Click the Next button.
4. Enter the VIN associated with the battery being returned and select the number of defective battery modules
identified (between 1 – 4 modules). Review the list of potential hazards related to the battery and select any that
apply. NOTE: In most cases, no hazards will be selected; however, if you are unsure about this selection you
should contact our support team at [email protected].
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 94 of 96
5. Read the notification about Department of Transportation training requirements and certify whether the
employee responsible for packaging and offering battery for shipment is approved to ship hazardous materials.
Click the Get Estimate button. NOTE: If you select “No hazmat trained employee. Use an authorized third party
instead.”, all costs related to the use of that third party (approximately $700 – $1,400) will be passed through to
your dealership.
6. Review Cost Estimate charges. Select the checkbox to signify your agreement with the payment Terms and
Conditions. Click Submit Request.
7. A table of Battery Return Requests will now be displayed. You may click on the View icon to see more details
for the request. Further, you may click the Schedule New Return button to submit an additional request.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 95 of 96
Update User Information
1. From any screen, click the User Profile option.
2. From this screen, you can update User, Dealer, or Dealer Locations information.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
May 2020
93F1 Page 96 of 96
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-06-29 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular93F1REV2
Replacement Service Bulletin Number:
MFR Communication Date: 2020-05-20
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool scanner for car newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【15+ Advanced Reset & Calibration Functions】The Thinkdiag scanner provides 15+ professional maintenance functions, including:✔ Oil Reset | ✔ ABS Bleeding | ✔ Injector Coding | ✔ SAS Reset✔ TPMS Reset | ✔ BMS Reset | ✔ Transmission Adaptation | ✔ AFS Reset | ✔ Sunroof Calibration | ✔ Brake Reset | ✔ Suspension Relearn | ✔ Electronic Throttle Relearn | ✔ Seat Calibration | + More reset/relearn/calibrate/adaptive functions under automotive full systems diagnostic menu. Ideal professional OBDII scanner for mechanics and DIY enthusiasts, Thinkdiag delivers professional OE-level diagnostics with adaptive relearn capabilities for precise vehicle servicing.
- 【Full-System Diagnostics OBD2 Scanner Bluetooth】 Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear DTCs, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It works with most car models after 1996, cover more than 120+ car brands. All car make and reset software come with 1 year update without any charge, much valuable and powerful than 1000 dollars level scanners in the market.
- 【Potential Feature Activation】 Thinkdiag diagnose obd2 scanner Bluetooth allows you to match the replaced components with ECU, activate potential functions for BMW, for GM, for Benz etc. Adjust some annoying features, adapt vehicle's settings to improve performance. No matter you are private owner or professional technician, Thinkdiag is a powerful and handy scanner in your repair tool list. Potential features are not suitable for every car models, please check with us before purchase. This superior function required newest Android OS device, it performs better on Android cell phone.
- 【Bidirectional Test/Active Test】 Thinkdiag car code reader actuates solenoids and actuators for active testing, send commands to systems/components to test their real-time working status, without using manual vehicle controls which saves much diagnostic time and effort to identify malfunction causes. You can check windows, doors, mirrors, sunroof, fans, fuel pump and other parts working status by actuation test function, thinkdiag supports 10000+ active tests. When you process Automotive full system diagnostic, you can do active test on every supported module.
- 【Intelligent Diagnostic Tool with Auto-VIN】Thinkdiag Bluetooth OBD2 scanner makes your smart phone device become a professional vehicle diagnostic tool, it compatible with Android and iOS system. Auto-VIN function supports the Thinkdiag identifies the most car models automatically, if autovin failed, you can choose car info manually. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined 4-in-1 Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.