NHTSA ID Number: 10176046
Manufacturer Communication Number: SA-012-20d
TSB/Document Date: 2020-06-02
Summary
2019-2020 MAZDA3 SERVICE CAUTIONS FOR NEW AND REVISED FEATURES: Connected Vehicle, Connected Vehicle Maintenance Mode, Mazda
Connected Vehicle Viewer (MCVV).
Assist System
(LAS)
6. Smart Brake
Support (SBS)
7. Smart Brake
Support [Rear]
(SBS-R)
8. Smart Brake
Support [Rear
Crossing] (SBS
RC)
To turn the system
back to ON, press
the i-ACTIVSENSE
switch once.NOTE:
1. When the
ignition is
turned OFF ON, iACTIVSENSE
switches to
ON.
OFF (Cancelled Status):
For 2020 (built
July 30, 2019) with
I-ACTIVSENSE OFF INDICATOR IS ILLUMINATED
VINS:
Page 13 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
1. JM1BP******
150232
2. 3MZBP******
118758
and later
For 2019-2020
with Recall 4219L
completed
(Closed).
When the iACTIVSENSE
switch is pressed,
the following
systems are OFF
and the iACTIVSENSE OFF
indicator
illuminates.
1. Lane
Departure
Warning
System
(LDWS)
2. Blind Spot
Monitoring
(BSM)
3. Distance
Speed Alert
(DSA)
4. Rear Cross
Traffic Alert
(RCTA)
5. Lane-keep
Assist System
(LAS)
To turn the system
back to ON, press
the i-ACTIVSENSE
switch once.
Page 14 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
NOTE:
1. When the
ignition is
turned OFF ON, iACTIVSENSE
switches to
ON.
2. If MRCC is
activated, iACTIVSENSE
switches to
ON.
3. When MRCC is
deactivated, iACTIVSENSE
remains ON.
4. The iACTIVSENSE
switch does
not cancel
SBS. SBS can
be deactivated
using
infotainment
system
settings.
Page 15 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Traffic Sign Recognition (TSR) * 2019 Mazda3 Only
NOTE:
Speed
Year/Model TSR
Limit
Display Location
Alert
2019
Mazda3
Instrument Cluster
2020
Mazda3
Instrument Cluster
and Active Driving
Display
Note
- Requires Navigation SD Card
- Disabled by Apple Carplay / Android Auto
USB connection
- If the VCM is updated to the latest
software, the TSR function on 2019 Mazda3
will no longer be available and cannot be
restored.
NOTE: TSR was never
intended
North- When
See
Owner'sfor
Manual
American market. Driving - i-ACTIVSENSE - iACTIVSENSE - Traffic Sign
Recognition System (TSR)
* Some models
MGSS: Traffic Sign Recognition
(TSR)
MAZDA CONNECT
Speed Limit Alert OFF
(Default Setting)
No Function
Page 16 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Driving under the speed limit
Driving over the speed limit
Page 17 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Stop sign and Speed Limit recognized
Do Not Enter sign and Speed Limit
recognized
MAZDA CONNECT
Speed Limit Alert ON
(Customer Setting
Change)
Page 18 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Excessive Speed Warning
MAZDA CONNECT Speed Limit Alert Customer Settings
1. Speed Limit Alert Settings
1. OFF
2. Visual
3. Visual + Audible
2. Speed Limit Alert Threshold
1. 0 mph
2. +5 mph
3. +10 mph
** SD Card maps may contain information about the speed limits of
the roads. The navigation system is able to warn driver if they exceed
the current limit. This information may not be available in some areas
or may not be fully correct for all roads on the map.
Speed Limit Alert* (2020 Mazda3 only)
NOTE:
1. Speed Limit Alert function is only available with a dealer installed
in-vehicle navigation system accessory**.
2. Speed Limit Alert function is displayed in the Instrument Cluster
and the Active Driving Display.
3. Speed Limit Alert function is disabled when Apple CarPlay™ or
Android Auto™ is connected.
* Some models
Below the Speed Limit
Above the Speed Limit
See Owner's Manual - When
Driving - i-ACTIVSENSE - iACTIVSENSE - Excessive Speed
Warning
Page 19 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
1. Active Driving Display
2. Instrument Cluster
3. Basic Display
4. i-ACTIVSENSE Display
5. Speed Limit Indication
MAZDA CONNECT Speed Limit Alert Customer Settings
1. Speed Limit Alert Settings
1. OFF
2. Visual
3. Visual + Audible
2. Speed Limit Alert Threshold
1. 0 mph
2. +5 mph
3. +10 mph
** SD Card maps may contain information about the speed limits of
the roads. The navigation system is able to warn driver if they exceed
Page 20 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
the current limit. This information may not be available in some areas
or may not be fully correct for all roads on the map.
Page 21 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
MAZDA CONNECT New Power Off Function
See Owner's Manual Interior Features - Mazda
Connect
1. Audio Mute - Short press the volume knob (Press again to cancel)
2. Power Off - Press and hold the volume knob (Press and hold again MGSS: ENTERTAINMENT SYSTEM
to Power ON)
In-vehicle Owner's Manual
installation
Page 22 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
MAZDA CONNECT Center Display View
The rear-view monitor does not utilize all of the center display space.
Function
Display
MAZDA
CONNECT FM
Apple CarPlay
Android Auto
Rear View
Monitor
Page 23 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
In-Vehicle Digital Owner's Manual
The in-vehicle digital OM can be displayed on the center display while
the vehicle is stopped. Customer can search descriptions and watch
videos of vehicle features and functions by operating the commander
switch.
NOTE:
1. The digital owner's manual must be installed during PDI. Due to
printing deadlines and later updates to the digital manual, the
content of the digital manual may differ from the printed manual.
2. USB memory flash drive FAT16 or FAT32 format is required for
installation.
3. The vehicle's infotainment system will only accept file names
[contents.tar] and [contents.sig]. File names with additional
suffixes will not be accepted.
4. The infotainment system may inadvertently be powered OFF if the
diagnostic assist function buttons are not pressed correctly.
Simply press and hold the volume knob to power back ON.
Page 24 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Navigation System
The 2019-2020 Mazda3 is not equipped with factory installed
navigation system, however, it is available as a dealer installed
accessory.
NOTE: Gen 6.5 Navi SD card with part number prefix BHP1
(2014-2018 Mazda3) installed in the Gen 7 2019-2020 Mazda3
will not function.
Gen 7
Gen 7
Gen 6.5
---
P/N prefix BDGF
Japan built vehicle
P/N prefix BDTS
Mexico built vehicle
P/N prefix BHP1
Interchangeable
SIRIUSXM Data Service No Free Trial (Preferred Package and above)
1. Only available as a paid subscription.
2. The 2019-2020 Mazda3 is not equipped with a factory installed
navigation system, however, it is available as a dealer installed
accessory.
3. SiriusXM Traffic Plus feature requires in-vehicle navigation SD
card.
See Owner's Manual - Interior
Features - Mazda Connect Appendix
SA-007/19 - SIRIUSXM DATA
SERVICES
Page 25 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Power Door Locks
Doors Lock With Keys In The Vehicle When Liftgate Lock Switch Is
Pressed.
(Japan built) vehicles with VINs lower than
JM1BP******1142789 (produced before May 28, 2019)
DO NOT leave keys in the vehicle. The doors will lock with the keys in
the vehicle when the liftgate lock switch is pressed and the liftgate is
closed, but the liftgate will not lock in the above condition.
NOTE: This is currently under investigation.
See Owner's Manual Before Driving - Doors and Locks
Doors cannot be unlocked using the outside door handle touch sensor
The door handle touch sensor system may not operate normally under
the following conditions:
1. The front passenger (without key) grabs and holds the outside door
handle before the driver (with key) touches the drivers outside door
handle unlock touch sensor.
2. The driver touches the sensing area of the door lock touch sensor
and the sensing area of the door release touch sensor at the same
time.
Good
No Good
Page 26 of 40
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2020 Mazda North American Operations, U.S.A.
05/20/2020 9:38 AM tlawrenc
Service Alert No.: SA-012/20
Last Issued: 05/18/2020
Walk-Away Auto Lock Function
A beep sound is heard when all doors and the liftgate are closed while
the transmitter is being carried. All the doors, fuel-filler lid, and
liftgate are locked automatically when the transmitter is out of the
operational range. Also, the hazard warning lights flash once. (Even if
the driver is in the operational range, all the doors, fuel-filler lid, and
liftgate are locked automatically after about 30 seconds.) If you are
out of the
operational range before the doors and the liftgate are completely
closed or another transmitter is left
in the vehicle, the walk-away auto lock function will not work. Always
make sure that all doors and the
liftgate are closed and locked before leaving the vehicle. The walkaway auto lock function does not close the power windows.
Operational Range
See Owner's Manual - Before
Driving - Doors and Locks
1. Exterior Antenna
2. 31 in (80 cm)
3. Operational range
Scenarios Where Walk-Away Lock Function May Not Work
Scenario
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-012-20d
Replacement Service Bulletin Number:
MFR Communication Date: 2020-05-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW
/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician. - NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- 【Looking for More Professional Vehicle Scan Tool?】iCarsoft E660 2026 Upgrade Version OBD2 scan tool can do it all-reads and clears trouble codes on Engine system, ABS system, Transmission system and Airbag system, And with 6 reset function. It covers more than 59 vehicle makes from 1996-2023 models ( included most USA/ Asia / EU vehicle brand) with full OBDII. (As every car model has its-owned specific car system and ECUs, not all car models have full car ECUs which may prevent the scanner from performing all listed system diagnostics or reset services. Therefore, please email to us with car VIN and services required to do scanner's services for a compatibility check before purchasing.)
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E660 2026 Upgrade Version diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan Engine system. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E660 2026 Upgrade Version adopts unique diagnostic software, works well for most Porsche, Benz, BMW, US Ford, Land Rover, Jaguar, Audi, VW, Volvo, Honda, Nissan, Infiniti, Toyota, Lexus, Scion, Isuzu, Hyundai, Kia, Daewoo, Mazda, Sprinter, Mini, Seat, Skoda, SAAB, EU Ford, Holden, AUS Ford, Acura, Subaru, Mitsubishi, Dacia, Renault, Fiat, GM, Chrysler, Citroen, Peugeot, Opel, Smart,Suzuki, Vauxhall, Alfa-Romeo, Lancia and etc.
- 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is a diagnostic tool that offers professional maintenance services, including Oil Reset, EPB, BMS, ETC, SAS, TPMS Reset. It can help you easily reset oil change indicators, recalibrate steering angle sensors, relearn replaced electric parking brake and so on. For optimal vehicle performance and maintenance convenience. (Tips: Please update the softwareafter receiving the product to obtain new service functions)
- 【118+ Real Time Record & Live Graph View】iCarsoft E660 2026 Upgrade Version can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. 15 languages: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage.
- 【All-in-One Diagnostic Tool for Porsche + 2 Extra Vehicle Brands】New POR V4.0 is a professional car scanner specifically engineered with dedicated software pre-installed for Porsche. You can also download 2 additional software packages FOR FREE from 26 supported brands (e.g., for Benz, for BMW, for Audi, for Land Rover).Upgraded to adopt quad-core 1.3GHz processor and HD touchscreen and professional diagnsotic OS for faster& smooth diagnsotic.LIFETIME FREE UPDATES, NO SUBSCRIPTION COST! PLEASE TELL US YOUR CAR INFORMATION TO OBTAIN A LIST OF ALL COMPATIBLE SERVICES FOR YOUR CAR FIRST (FOR EXAMPLE: BATTERY REGISTRATION FUNCTION IS NOT COMPATIBLE WITH PORSCHE 997.2)
- 【29 MAINTENANCE SERVICES FOR PORSCHE SERIES CARS】 It can perform the 29 reset service for Porsche series cars-Oil Reset; SAS; EPB; BMS; ETC; DP ; ABS Bleeding; Injector Coding; TPMS; Air Suspension; Air Conditioner; Head Lamp; Body Stablity Control; Engine Control; Transmission; AirBag; Seat; DWR; MIS; EG; ODO; Clutch; High Voltage Battery; Cruise Control; Radar/Camera; Vehicle Setup,etc. Up to 49 vehicle-maintenance-services for the extra 2 vehicle brands you installed (Tip: Not all services will be worked on every car mode. Some vehicle models may be lack of certain ECU-control modules to make some services may not work).
- UPGRADE SERVICES: Breaks down 29 services to 234 sub-service for car owners/machinist to perform maintenance based on corresponding sub-modules! The detailed sub-service for sub-modules assist to perform precise vehicle maintenance.Improving the accuracy of car maintenance and reducing potential failure risks caused by whole-module maintenance to main modules.such as Oil Reset is refined into Reset maintenance interval/Reset service interval/Service Reset; Engine Control Reset is refined into Delete adaptation data/Short tests/System tests/Swirl-flap actuator/Bleeding high temperature coolant circuit and more.（sub-services vary based on vehicle model/year）
- 【EXTRA VEHICLE MAINTENANC SERVICES FOR SPECIFIC SYSTEMS】Have no ability to perferm calibration to special/specific systems/modules? This OBD2 scanner solve your troubles- for common systems/modules & for specific sytems/modules, assist you to perform diagnsing/calibration/reset/relearn services for non-common modules to finish your car maintenance/ diagnostic (eg: Central Computer system/module :Function activation/Multimedia interface test/AM Field Strength/Current FM Field Strength/FM Field Strength/MOST system reserve/Self-test/Deactivate Production Mode/Reset to factory settings/MOST System Test). (Tip: The services vary based on the vehicle brands)
- 【 MORE PROFESSIONAL BI-DIRECTIONAL ACTUATION TESET 】Exclusive POR V4.0 comes with powerful bidirectional testing capability,do actuaction test for deeper unit-checking after replacement or overhaul (1333 test items for Porsche, like:Fuel high-pressure fuel injector 1-4, Empty tank, Radiator fan, OTA-FC Connectivity, backrest, Backup battery, and more; 2136 test items for Audi; 1670 test items for Benz; 1599 test items for Volvo; 1360 test items for VW; 2705 test items for GM etc.). Help to check your car units work well or not after vehicle maintenance or daily car-body check, keep drives always in safety.(Warm tip:The quantity of test item is based on the units your car has)
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.