NHTSA ID Number: 10175945
Manufacturer Communication Number: Circular26N6REV1
TSB/Document Date: 2020-06-04
Summary
Over time and mileage, the factory-installed catalyst may not perform as required. If the effectiveness of the catalyst is reduced, this may result in increased tailpipe emissions and the vehicle could fail an emissions (IM) inspection. Updated claiming instructions to include connecting battery charger. Updated parts return core information in Section E.
Emissions Recall
Code: 26N6
REVISION
Subject
Release Date
REVISION SUMMARY
Catalyst
May 22, 2020
Updated claiming instructions to include connecting battery charger.
Updated parts return core information in Section E.
Country
Beginning
Model
Year
Ending
Model
Year
Vehicle
USA
CAN
2018
2018
2018
2018
ATLAS
ATLAS
Affected Vehicles
Vehicle
Count
32,700
5,337
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
Problem Description
Corrective Action
Code Visibility
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Over time and mileage, the factory-installed catalyst may not perform as required. If the
effectiveness of the catalyst is reduced, this may result in increased tailpipe emissions and the
vehicle could fail an emissions (IM) inspection.
Replace catalyst and update ECM software.
On or about May 19, 2020, the campaign code was applied to affected vehicles.
Owner Notification
Owner notification will begin in June 2020. Owner letter examples are included in this bulletin
for your reference.
Emissions Campaigns
Requirements
(CALIFORNIA ONLY)
The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.vwhub.com.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
Labels can be ordered at no cost via the Compliance Label Ordering portal at www.vwhub.com.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
Form No. F_3.4_AHQ-CP-C_048 Rev. 1.0
26N6 Page 1 of 19
Parts Information
Parts Control Type:
Upper Order Limit
Parts will be managed with a weekly Upper Order Limit. Please see Parts On
Command (POC) for your Upper Order Limit quantity.
Initial Allocation:
YES
Dealers will be sent an initial allocation prior to customer notification. If no initial
allocation was received, please reference the Repair Projection Tool (below) to view
your potential VIN population.
Repair Projection Tool:
(right click to open)
Criteria
ALL
Quantity
Part Number
P.O.C. Part Description
Ordering Method
1
3QF-253-059-PX
Exh. Pipe (Catalyst)
UOL
2
3C0-253-115
Gasket
UOL
6
N -102-861-08
Nut
UOL
1
5Q0-253-141
Clamp
UOL
3
WHT-000-729-A
UOL
NOTE
The specified part numbers reflect the status at the start of this service action. Interim updates made in ETKA can
cause a listed part number to become unavailable. In this case, the new part number specified in ETKA should be
used.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
26N6 Page 2 of 19
Claim Entry Instructions
The labor times listed here may differ from the labor operations and labor times listed in ELSA.
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit request via WISE under the Campaigns/Update/Recall Closure option.
Canada dealers: Upload the repair order [signed by customer] to Volkswagen
WIN/Operations/Campaign
Closure.
Service Number
26N6
Damage Code
0099
Parts Vendor Code
Claim Type
WWO
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Mark catalyst* as causal part
Do not claim wash/loaner under this action
U.S.A.: Loaner/rental coverage cannot be claimed under this action. However,
loaner/rental may be covered under the mobility program. Please refer to section 3.30
in the Volkswagen
Warranty Policy and Procedures Manual for loaner claims
information and reimbursement details.
Canada: Loaner/rental coverage cannot be claimed under this action. Please refer to the
Volkswagen
Service Loaner Program to determine loaner eligibility.
Criteria I.D.
01 or 02 or 03
LABOR
Labor Op
Time Units
Description
2673 55 99
260
Replace catalyst
2706 89 50
10
Connect battery charger
2470 25 99
Time stated on
diagnostic protocol
(Up to 50 T.U.)
Update ECM software
PARTS
Quantity
Part Number
Description
1.00
3QF253059PX
Exh. pipe (Catalyst)*
2.00
3C0253115
Gasket
1.00
5Q0253141
Dual clamp
6.00
N 10286108
Shouldered hex. nut, self-locking
3.00
WHT000729A
Continued on next page
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
26N6 Page 3 of 19
-AND-
Add ONLY if exhaust manifold stud(s) break during the repair
LABOR
Labor Op
Time Units
Description
2625 01 99
20
(for each broken
manifold stud)
Replace broken manifold stud
PARTS
Quantity
Part Number
Up to 6.00
N 0445203
Description
Stud
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
26N6 Page 4 of 19
Customer Letter Example (United States)
This notice applies to your vehicle: ,
Subject: Emissions Recall 26N6 - Catalyst
Dear Volkswagen
Owner,
In cooperation with the United States Environmental Protection Agency and the California Air Resources Board, we are informing
you of our decision to conduct an emissions recall on certain 2018 model year Volkswagen
Atlas vehicles. Our records show
that you are the owner of a vehicle affected by this action.
What is the issue?
Over time and mileage, the factory-installed catalyst may not perform as required. If the
effectiveness of the catalyst is reduced, this may result in increased tailpipe emissions and the
vehicle could fail an emissions (IM) inspection.
What will we do?
Your authorized Volkswagen
dealer will replace the catalyst and update the ECM software in
your vehicle. This work will take about four (4) hours to complete and will be performed for you
free of charge. Please keep in mind that your dealer may need additional time for the preparation
of the repair, as well as to accommodate their daily workshop schedule.
IMPORTANT! If the ECM in your vehicle has been “chipped,” “tuned,” or otherwise
modified from original factory specifications with aftermarket components and/or
software, work needed to repair, replace, or return the ECM to original factory
specifications is NOT covered under this action.
What should you do?
Please contact your authorized Volkswagen
dealer as soon as possible to schedule this service.
To set up an appointment online, please visit www.vw.com/find-a-dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please forward
this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you
have changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply
card and mail it to us so we can update our records.
Important information for
California Vehicle Owners
– California Regulations
California regulations require that this campaign be completed prior to the time you renew your
vehicle registration. Therefore, please make sure that this campaign is completed prior to
the renewal of your vehicle registration, and that you furnish proof of completion to the
Department of Motor Vehicles (DMV) in the form of a copy of the dealer’s repair order, including
a signed “Proof of Correction” certificate. You obtain this from your dealer after the campaign
has been completed. Please retain the signed “Proof of Correction Certificate” with your vehicle
records. DO NOT MAIL THIS FORM to the DMV, unless requested.
Can we assist you
further?
If your authorized Volkswagen
dealer fails or is unable to complete this work free of charge
within a reasonable time, or if you should have any questions about this communication, please
reach out to us using your preferred method of communication at www.vw.com/contact or by
calling us at 800-893-5298.
Checking your vehicle for
open Recalls and Service
Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign,
please visit www.vw.com/owners/recalls and enter your Vehicle Identification Number (VIN) into
the Recall/Service Campaign Lookup tool.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Volkswagen
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
26N6 Page 5 of 19
Customer Letter Example (CANADA)
This notice applies to your vehicle: ,
Subject: Emissions Recall 26N6 - Catalyst
Dear Volkswagen
Owner,
This notice is sent to you in accordance with the requirements of the Canadian Environmental Protection Act, 1999.
Volkswagen
has determined that a defect, which relates to a prescribed emission standard, exists in certain 2018 model
year Volkswagen
Atlas vehicles. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
Over time and mileage, the factory-installed catalyst may not perform as required. If the
effectiveness of the catalyst is reduced, this may result in increased tailpipe emissions.
What will we do?
Your authorized Volkswagen
dealer will replace the catalyst and update the ECM software
in your vehicle. This work will take about four (4) hours to complete and will be performed
for you free of charge. Please keep in mind that your dealer may need additional time for
the preparation of the repair, as well as to accommodate their daily workshop schedule.
IMPORTANT! If the ECM in your vehicle has been “chipped,” “tuned,” or otherwise
modified from original factory specifications with aftermarket components and/or
software, work needed to repair, replace, or return the ECM to original factory
specifications is NOT covered under this action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Volkswagen![]()
dealer as soon as possible to schedule this service. On or about May 19, 2020 the
necessary repair instructions and parts will be available to your authorized Volkswagen![]()
dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of
receipt. If you have changed your address or sold the vehicle, please fill out the enclosed
prepaid Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Volkswagen
dealer fails or is unable to complete this work free of charge
within a reasonable time, please contact Customer Relations, Monday through Friday from
8AM to 8PM EST by phone at 1-800-822-8987 or via our “Contact Us” page at www.vw.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Volkswagen
Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
26N6 Page 6 of 19
Repair Overview
Replace catalyst and update ECM software.
NOTE
These repair instructions may differ from the labor operations and labor times listed in ELSA.
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.
This procedure must be read in its entirety prior to performing the repair.
Due to variations in vehicle equipment and options, the steps/illustrations in this work procedure may not
identically match all affected vehicles.
Diagnosis and repair of pre-existing conditions in the vehicle are not covered under this action.
When working during extreme temperatures, it is recommended that the vehicle be allowed to acclimate
inside the shop to avoid temperature-related component damage/breakage.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Volkswagen
dealer. 2020 Volkswagen
Group of America, Inc. and Volkswagen
Canada. All Rights Reserved.
May 2020
26N6 Page 7 of 19
Required Special Tools
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium lead positive grid, maximizes conductivity and...
- Robust envelope separator with puncture resistant back...
- Vent cap design that resists acid leakage
- High density negative paste, improves performance and...
- Enhanced life alloy or Silver Calcium stamped alloy...
- Calcium Lead positive grid, maximizes conductivity and...
- Robust Envelope Separator with puncture-resistant back...
- Vent cap design that resists acid leakage
Last update on 2026-05-30 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular26N6REV1
Replacement Service Bulletin Number:
MFR Communication Date: 2020-05-22
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 2026 ALL-IN-ONE HEAVY DUTY TRUCK SCANNER – BUILT FOR DIESEL DIAGNOSTICS:The ANCEL X7HD PRO combines full-system diagnostics, bi-directional control, ECU coding, HDOBD/OBD2 functions, and 42+ reset services in one powerful heavy duty truck scanner. This diesel scan tool helps technicians, fleet owners, and repair shops diagnose problems faster, reduce downtime, and complete more repairs without switching between multiple truck diagnostic tools. Features a 10.1" Android tablet, Bluetooth & Wi-Fi, live data graphing, and 2 years of f-ree updates
- 42+ RESET FUNCTIONS – MORE THAN A BASIC TRUCK CODE READER:Perform essential service functions including forced DPF regeneration, injector coding, speed limiter adjustment, idle adjustment, oil reset, ABS reset, SRS reset, EPB reset, throttle reset, and suspension calibration. Designed for real truck maintenance and fleet service, this commercial truck diagnostic scanner helps reduce dealer visits, avoid unnecessary downtime, and handle more repair jobs with one diesel diagnostic tool
- ACTIVE TEST & ECU CODING – ADVANCED BIDIRECTIONAL SCAN TOOL FOR TRUCKS:Quickly locate faults by activating components and sending commands directly to vehicle systems. Test injectors, ABS, throttle, cooling systems, and other modules in real time without unnecessary disassembly. ECU coding and module matching help adapt replacement parts, restore factory settings, and reduce repeat repairs, making this semi truck scan tool ideal for advanced troubleshooting and daily shop work
- FULL-SYSTEM HDOBD/OBD2 DIAGNOSTICS – WIDE TRUCK & ENGINE COVERAGE:Read and clear codes, monitor live data, freeze frame, and diagnose engine, transmission, ABS, body, and other major systems. Compatible with Freightliner
, Kenworth
, Peterbilt
, Volvo
, Mack
, International
, and other commercial truck brands, plus Cummins
, Caterpillar
, Detroit, Paccar
, and Navistar
diesel engines. Also supports full OBD2/EOBD diagnostics for standard vehicles, making it a versatile truck obd2 scanner for mixed fleets and repair shops - PROFESSIONAL HARDWARE + RELIABLE SUPPORT – BUILT FOR DAILY SHOP USE:This professional diesel diagnostic computer features a 10.1" touchscreen, Android 10.0 system, 6000mAh battery, Bluetooth/Wi-Fi connectivity, and built-in front & rear cameras for documenting repairs and remote troubleshooting. Includes 2 years of fr-ee updates, 1-year w-arranty, and responsive technical support. Contact [email protected] before purchase to confirm compatibility and supported functions for your truck or diesel engine
- 【Built for Heavy Duty Diesel Diagnostics】Designed for SAE J1939 and J1708 compliant trucks, buses, and diesel-powered commercial vehicles. HD601 truck scanner diagnostic tool helps owner-operators, small fleets, mobile technicians, and independent repair shops quickly identify fault codes, view live data, and make informed repair decisions—saving time, reducing downtime, and avoiding unnecessary shop visits
- 【Full System Diagnostics+All HD OBD Modes】The New HD601 heavy duty truck scanner delivers full-system diagnostics on SAE J1939 and J1708-compliant commercial vehicles—digging into engine, transmission, ABS, fuel, every system that keeps your rig rolling. It supports all HD OBD modes, giving you live data, freeze frame, ECU info, vehicle info, emissions data tracking, plus code reading and clearing. Not just what broke, but why—so you fix it right the first time. Pinpoint issues faster, cut repair costs, and spend less time on the shoulder
- 【Wide Heavy-Duty Vehicle Coverage】Supports a wide range of heavy-duty vehicle manufacturers and systems, including Freightliner
, Kenworth
, Peterbilt
, Volvo
, International
, Detroit, Cummins
, Paccar
, Allison, Eaton
, Bendix
, Wabco, and more. Coverage varies by vehicle make, model, year, and system configuration. Contact our support team before purchase if compatibility verification is needed - 【Speaks Major Truck Protocol】The New HD601 diesel truck scanner is built for American-made trucks—and supports the heavy‑duty protocols you' re most likely to run into on the road: SAE J1939, J1708/J1587, ISO 15765‑4, ISO 14230‑4, ISO 9141‑2, J1850 PWM/VPW, ISO 27145‑4, and EURO‑6. For most trucks, model years, and systems, it speaks the language your vehicle understands. Just plug it in and start diagnosing—no guesswork, no gatekeeping. Note: vehicle functions and module availability may vary by manufacturer and model year
- 【Save Hundreds on Diagnostic Fees】Why pay $150–300 for someone to read your codes? With the New ANCEL heavy duty truck scanner, you can pull fault codes yourself—in minutes, without leaving the truck. One or two uses pays for the tool. After that, every diagnostic is money back in your pocket. Smart investment for owner-operators, techs, and small fleets. Read and clear stored fault codes in minutes. Active fault codes may require repairs before they can be cleared
- 【One Tool, Total Fleet Coverage: 6/9/16 Pin Ready】Featuring an integrated 16-pin OBD2 connector and professional-grade 6-pin & 9-pin adapters, this heavy duty truck scanner provides extensive support for J1939, J1708, J1587, ISO 14230-4, ISO 15765-4 and ISO 9141-2, ISO 27145-4 protocols. It offers reliable diagnostic coverage for major American diesel brands—including Cummins
, Paccar
, Caterpillar
, Detroit, and Freightliner
—making it a versatile semi truck scanner for managing any diverse fleet. - 【2 in 1 Diesel Code Reader & Advanced HD OBDII】Equipped with professional-grade diesel scanner capabilities, the HD301 features intuitive Read/Erase codes and turn off the "Check Engine" light. With the built-in DTC Lookup library, you can instantly access fault code definitions on-device without searching the internet. It also retrieves hundreds of essential live sensor data—such as coolant temperature, fuel pressure, and engine RPM—in a stable text format for precise and rapid troubleshooting. (Please note that the HD301 can not support DPF Regen.)
- 【Full System Truck Diagnostic】The FOXWELL HD301 heavy duty scan tool is engineered to deeply access and scan all available electronic control modules specifically for truck, including Engine, Transmission, ABS, SRS, Chassis, and Body Control. This professional truck scanner diagnostic tool allows you to identify issues across the entire vehicle, ensuring your rig stays in peak condition for the long haul.
- 【Versatile for most big Rigs: Commercial, Passenger & Beyond】Engineered for more than just trucks, this heavy duty scan tool offers extensive coverage for pickups, buses, trailers, and even marine vessels. From construction machinery (excavators, loaders) to agricultural equipment (tractors, harvesters), it provides a true all-in-one diagnostic solution.
- 【Plug-and-Play & No Subscription】Designed for the road! No WiFi, no batteries, and no complex App setup required. Simply plug it into your vehicle’s diagnostic port to start scanning immediately. Enjoy lifetime free software updates to keep your HD301 diesel truck scanner current with the latest vehicle models and features—without any hidden subscription fees—While overcoming language barriers with support for Spanish and English.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




