Classification:

Reference:

EC20-008a

Date:

NTB20-015a

March 16, 2020

MIL ON WITH DTC P0087
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.

APPLIED VEHICLES:

2019 Armada (Y62)
2017-2019 NV Cargo and Passenger (F80)
2016-2019 Titan (A61)
2016-2019 Titan XD (A61)

APPLIED ENGINE:

VK56VD (V8 gasoline)

IF YOU CONFIRM
The MIL is ON and DTC P0087 (FRP CONTROL SYSTEM) is stored in the ECM.

ACTION
1. Perform the appropriate diagnostic and repair procedure according to the ESM.
2. Reprogram the ECM, if applicable.


The ECM reprogram in this Service Procedure is not a repair for the DTC, but
instead updates the way the permanent DTC is stored and allowed to be erased.
The DTC must be properly diagnosed and repaired before the reprogram is
applied.

IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.

1/4

SERVICE PROCEDURE

1.

Diagnose and repair the vehicle, per the ESM, for DTC P0087.

2.

Using CONSULT-III plus (C-III plus), confirm the current ECM part number and write it
on the repair order.


If it matches one of the part numbers in Table A on page 3, proceed to step 3 to
reprogram the ECM.



If it does not match one of the part numbers in Table A, ECM reprogramming is
not needed. This procedure is complete.

Perform the following before starting the reprogramming procedure to prevent
damage to the control unit:


Connect the AC Adapter to the CONSULT PC.



Connect the CONSULT PC to the internet via Wi-Fi or a network cable.



Ensure ASIST on the CONSULT PC has been synchronized (updated) to the current
date and all C-III plus software updates (if any) have been installed.



Turn OFF all external Bluetooth® devices (e.g., cell phones, printers, etc.) within
range of the CONSULT PC and the VI. If Bluetooth® signal waves are within range
of the CONSULT PC during reprogramming, the reprogramming may be interrupted.



Turn OFF all vehicle electrical loads.



Connect a battery maintainer or smart charger, set to reflash mode or a similar
setting, to ensure the battery voltage stays between 12.0 V and 15.5 V.

HINT:


If you are not familiar with the reprogramming procedure, click here. This will link you
to the "CONSULT-III plus (C-III plus) ECM Reprogramming" general procedure.



Take the vehicle for a 10 minute drive in order to meet the following Idle Air Volume
Learning conditions:
o Engine coolant temperature: 70 - 100 °C (158 - 212 °F)
o Battery voltage: More than 12.9 V (At idle)
o Transmission: Warmed up



When reprogramming is complete, you will be required to perform Throttle Valve
Closed Position, Idle Air Volume Learning, Accelerator Closed Position and DTC
Erase.

3.

Reprogram the ECM.

4.

After completing Erase ALL DTCs, print a copy of the C-III plus screen showing the
before and after part numbers of the control unit and attach it to the repair order.

2/4

NTB20-015a

Table A
MODEL
Armada

YEAR
2019
2017

NV Cargo and
Passenger

2018
2019

2016

Titan and
Titan XD

2017

2018

2019

CURRENT ECM PART NUMBER: 237106JD0B, 6JD1B, 6JD0C, 6JD1C
9JJ4A, 9JJ5A, 9JJ6A, 9JJ7A
9JJ4B, 9JJ5B, 9JJ6B, 9JJ7B
9JJ4C, 9JJ5C, 9JJ6C, 9JJ7C
9JJ4D, 9JJ5D, 9JJ6D, 9JJ7D
9JK0B, 9JK1B, 9JK2B, 9JK3B
9JK0C, 9JK1C, 9JK2C, 9JK3C
9JL0A, 9JL1A, 9JL2A, 9JL3A
9JL0B, 9JL1B, 9JL2B, 9JL3B
9JL0C, 9JL1C, 9JL2C, 9JL3C
EZ20B, EZ21B, EZ22B, EZ23B
EZ20C, EZ21C, EZ22C, EZ23C
EZ20D, EZ21D, EZ22D, EZ23D
EZ20E, EZ21E, EZ22E, EZ23E
EZ48A, EZ49A EZ58A, EZ59A
EZ48B, EZ49B EZ58B, EZ59B
EZ48C, EZ49C EZ58C, EZ59C
EZ48D, EZ49D EZ58D, EZ59D
EZ48E, EZ49E EZ58E, EZ59E
EZ01A, EZ02A, EZ03A, EZ04A, EZ05A, EZ06A, EZ07A, EZ08A
EZ01B, EZ02B, EZ03B, EZ04B, EZ05B, EZ06B, EZ07B, EZ08B
EZ01C, EZ02C, EZ03C, EZ04C, EZ05C, EZ06C EZ07C, EZ08C
EZ01D, EZ02D, EZ03D, EZ04D
EZ10A, EZ11A, EZ13A, EZ14A, EZ16A, EZ17A, EZ19A
EZ10B, EZ11B, EZ13B, EZ14B, EZ16B, EZ17B, EZ19B
EZ10C, EZ11C, EZ13C, EZ14C, EZ16C, EZ17C, EZ19C
EZ10D, EZ11D, EZ13D, EZ14D, EZ16D, EZ17D, EZ19D
EZ10E, EZ11E, EZ13E, EZ14E, EZ16E, EZ17E, EZ19E
EZ24A, EZ26A, EZ27A, EZ28A, EZ29A
EZ24B, EZ26B, EZ27B, EZ28B, EZ29B
EZ24C, EZ26C, EZ27C, EZ28C, EZ29C
EZ24D, EZ26D, EZ27D, EZ28D, EZ29D
EZ24E
EZ36A, EZ37A, EZ38A, EZ39A
EZ36B, EZ37B, EZ38B, EZ39B
EZ36C, EZ37C, EZ38C, EZ39C
9FT1B, 9FT2B, 9FT3B, 9FT4B, 9FT5B, 9FT6B, 9FT7B, 9FT8B
9FT1C, 9FT2C, 9FT3C, 9FT4C, 9FT5C, 9FT6C, 9FT7C, 9FT8C
9FT1D, 9FT2D, 9FT3D, 9FT4D
EZ54A, EZ55A, EZ56A, EZ57A
EZ54B, EZ55B, EZ56B, EZ57B
EZ54C, EZ55C, EZ56C, EZ57C
9FU1B, 9FU3B 9FU1C, 9FU3C
EZ61B, EZ63B EZ61C, EZ63C

3/4

NTB20-015a

CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:

(1)
(2)

DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Reprogram ECM
(1)
DE97AA
ZE
32
(2)
Reference the electronic parts catalog and use the ECM as the Primary Failed Part
(PFP).
Reference the current Nissan Warranty Flat Rate Manual and use the indicated Flat
Rate Time (FRT).

AMENDMENT HISTORY
PUBLISHED DATE REFERENCE

DESCRIPTION

March 3, 2020

NTB20-015

Original bulletin published

March 16, 2020

NTB20-015a

APPLIED VEHICLES and Table A updated

4/4

NTB20-015a