Installation and Conversion Instructions

Macan (95B)
26/14

ENU

6316

6

Stainless Steel Skid Plate (2JC)

Information:

Retrofitting

Model Year:

As of 2014 up to 2018

Vehicle Type:

Macan Turbo

Restriction:

NOT in conjunction with SportDesign package (I-no. 2D1 / 2D2 / 2D5 / 2D6).

Figure 1
Note:

The stainless steel skid plate gives the Macan a customized look and makes it appear even more
powerful and dynamic.
The stainless steel skid plate is available separately under the optional equipment item "2JC" and in
combination with the stainless steel rear panel under the optional equipment item "2JX", also for new
vehicles ex-works.
The combination with the stainless steel rear panel is recommended.

Part Info:

95B.807.833.A 6M7

Material:

———

 Stainless steel skid plate, set for Turbo

——

Isopropanol (commercially available)

Tequipment

Mar 23, 2020
Page 1 of 10

6

Macan (95B)
6316

Tools:

ENU

Installation and Conversion Instructions

26/14

9900 - PIWIS Tester 3
Polyoxymethylene wedge (POM wedge, commercially available)
Soft-faced hammer (commercially available)
Stanley knife (commercially available)
Saw or vibrating knife
Round/flat file
Side cutters
Flat scraper
Flashlight

Assembly:

1

Preparatory work.
1.1

Connect battery charger (  Workshop Manual '2X00IN Battery trickle charging').

1.2

Remove front apron (  Workshop Manual '631519 Removing and installing front apron').

1.3

Remove rear panel (  Workshop Manual
'631619 Removing and installing rear
panel' Figure 2).
1
2
3

– Tab
– Skid plate
– Front apron

1.3.1

Remove license plate cover.
Workshop Manual '668319
Removing and installing license plate cover'

1.3.2

Remove clamp ( Figure 3 -1-).
1

Figure 2

– Clip

Figure 3

Mar 23, 2020
Page 2 of 10

Tequipment

Installation and Conversion Instructions
1.3.3

Macan (95B)
26/14

ENU

6316

6

Release the tabs from the center of
the front apron in the sequence A,
B, C and D using a plastic spatula
( Figure 4 -arrow a-). Carefully
pull the skid plate downwards at the
same time ( Figure 4 -b-).

Figure 4
When guiding out the (inner) tab,
the (outer) tab moves inwards (
Figure 5 -arrow-).
The skid plate can only be guided
out of the front apron without
damaging it irreparably from
position  Figure 5 -B-.
1

– (Outer) tab

Figure 5

Tequipment

Mar 23, 2020
Page 3 of 10

6

Macan (95B)
6316

ENU

Installation and Conversion Instructions

26/14

1.4

Remove front spoiler from the front apron
( Figure 6).
1
2
3
4

–
–
–
–

Tab
Front spoiler
Front apron
Front spoiler seam
Figure 6

1.4.1

Press down the locking lug (
Figure 7 -arrow a-) and unclip front
spoiler from front apron ( Figure 7
-arrow-).
1
2

1.4.2

– Locking lug
– Front spoiler

Guide outer tabs on the front spoiler
( Figure 7 -1-) out of the front
apron and remove front spoiler (
Figure 7 -2-).
Figure 7

CAUTION
Machining work (drilling, filing, grinding, etc.)
•

Risk of damage to electric wires

•

Risk of damage to components

•

Risk of damage to painted surfaces



Exercise extreme care while working. Use a bit stop while drilling if necessary.



Cover and, if necessary, mask surfaces that are at risk (painted surfaces, wood or carbon look parts
and so on).
CAUTION

Pointed or sharp objects
•

Risk of nicks, cuts or scrapes



Wear personal protective gear.
2

Install stainless steel skid plate.
2.1

Mar 23, 2020
Page 4 of 10

Remove edges on the front spoiler.

Tequipment

Installation and Conversion Instructions
2.1.1

Macan (95B)
26/14

ENU

6316

6

Remove edge on the front spoiler
close to the six mounting points (
Figure 8 -inset A-) and the center
( Figure 8 -inset B-) using a
cutter (Stanley knife).
1

– Edge

Figure 8
2.1.2

Remove edge on the front spoiler
at the outer left and right using a
cutter (Stanley knife) ( Figure 9).
1
A
B
C

– Edge
– Front spoiler without
edge turned 180°
– Front spoiler without edge
– Front spoiler with edge

Figure 9

Tequipment

Mar 23, 2020
Page 5 of 10

6

Macan (95B)
6316

ENU

Installation and Conversion Instructions

26/14

2.2

Make a cut-out in the front spoiler ( Figure
10).
1
2