NHTSA ID Number: 10171999
Manufacturer Communication Number: Circular 26M7
TSB/Document Date: 2020-03-06
Summary
Under certain high load and/or highway driving conditions vehicle exhaust temperatures may increase catalyst aging, due to thermal stress, which could lead to elevated tailpipe emissions.
Emissions Recall
Code: 26M7
Subject
Release Date
Affected Vehicles
Catalytic Converter & Engine Control Module (ECM) Software
February 27, 2020
Country
Beginning
Model Year
Ending
Model Year
Vehicle
USA
CAN
2011
2011
2012
2012
Q7
Q7
Check Campaigns/Actions screen in Elsa on the day of repair to verify that a VIN qualifies for repair under this
action. Elsa is the only valid campaign inquiry & verification source.
Problem Description
Corrective Action
Code Visibility
Campaign status must show “open.”
If Elsa shows other open action(s), inform your customer so that the work can also be completed at
the same time the vehicle is in the workshop for this campaign.
Under certain high load and/or highway driving conditions vehicle exhaust temperatures may
increase catalyst aging, due to thermal stress, which could lead to elevated tailpipe emissions.
Install an improved catalytic converter and updated Engine Control Module (ECM) software.
On or about February 27, 2020, the campaign code will be applied to affected vehicles.
Owner Notification
Owner notification will take place in February 2020. Owner letter examples are included in this
bulletin for your reference.
Emissions Campaigns
Requirements
(CALIFORNIA ONLY)
The California Air Resources Board and the Department of Motor Vehicles (DMV) require
emissions-related campaigns to be completed prior to vehicle registration renewal. When
campaign work is done you must provide the owner with a signed “Vehicle Emission Recall –
Proof of Correction” certificate (RC EMISCAVWAU). Order certificates online via the
Compliance Label Ordering portal at www.accessaudi.com.
Additional Information
Please alert everyone in your dealership about this action, including Sales, Service, Parts
and Accounting personnel. Contact Warranty if you have any questions.
Dealers must ensure that every affected inventory vehicle has this campaign completed before
delivery to consumers.
Fill out and affix Campaign Completion Label (CAMP 010 000) after work is complete.
Labels can be ordered at no cost via the Compliance Label Ordering portal at
www.accessaudi.com.
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi
Canada. All Rights Reserved.
February 2020
26M7 Page 1 of 15
Parts Information
Parts Control Type:
VIN to order
Due to the small number of affected vehicles there will not be
a parts allocation. Please reference the Repair Projection
Tool (below) to view your potential VIN population.
If parts are needed to support a vehicle repair:
• US Dealers - use AVA
• CAN Dealers - contact the Parts Specialists via phone
(800-767-6552), email
(VWoAPartsSpecialists@vw
.com), or chat/text with
the VIN to order
Repair Projection Tool:
Right click to open
Criteria
Part Number
P.O.C. Part Description
Ordering Method
1
7L8-254-301-QX
VIN to Order
1
7L8-254-350-SX
VIN to Order
2
8K0-253-115-A
Gasket
VIN to Order
2
7P0-253-115
Gasket
VIN to Order
12
N -911-308-01
Nut
VIN to Order
2
1K0-253-141-T
Clamp
VIN to Order
Qty
01
NOTE
The specified part numbers reflect the status at the start of this recall. Interim updates
made in ETKA can cause a listed part number to become unavailable. In this case, the
new part number specified in ETKA should be used.
The information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These procedures
are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To determine whether
this information applies, contact an authorized Audi dealer. 2020 Audi Group of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
26M7 Page 2 of 15
Claim Entry Instructions
After campaign has been completed, enter claim as soon as possible to help prevent work from being duplicated
elsewhere. Attach the Elsa screen print showing action open on the day of repair to the repair order.
If customer refused campaign work:
U.S. dealers: Submit the request through Audi
Warranty Online under the Campaigns/Update option.
Canada dealers: Upload the repair order [signed by customer] to Audi WIN/Operations/Campaign Closure.
Service Number
26M7
Damage Code
0099
Parts Vendor Code
Claim Type
002
Sold vehicle: 7 10
Unsold vehicle: 7 90
Causal Indicator
Vehicle Wash/Loaner
Mark left catalyst* as causal part
Do not claim wash/loaner under this action
Vehicles may have more than one criteria. Complete and claim all applicable criteria
on one claim.
Criteria I.D.
01
LABOR
Labor Op
Time Units
2673 20 99
190
Description
Replace left and right catalysts
PARTS
Criteria I.D.
Quantity
Part Number
Description
1.00
7L8254301QX
Exhaust pipe with catalyst (left)*
1.00
7L8254350SX
Exhaust pipe with catalyst (right)
2.00
1K0253141T
Dual clamp
2.00
7P0253115
Gasket
2.00
8K0253115A
Gasket
12.00
N 91130801
Shouldered hex. nut, self-locking
02
LABOR
Labor Op
Time Units
Description
2706 89 50
10
Connect battery charger
2470 25 99
Time stated on
diagnostic protocol
Update engine control module software
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
26M7 Page 3 of 15
Customer Letter Example (United States)
This notice applies to your vehicle: ,
Subject: Emissions Recall 26M7 - Catalytic Converter & Engine Control Module (ECM) Software
Dear Audi Owner,
In cooperation with the United States Environmental Protection Agency and the California Air Resources Board, we are informing
you of our decision to conduct an emissions recall on certain 2011-2012 model year Audi Q7 vehicles. Our records show that
you are the owner of a vehicle affected by this action.
What is the issue?
Under certain high load and/or highway driving conditions vehicle exhaust temperatures may
increase catalyst aging, due to thermal stress, which could lead to elevated tailpipe emissions.
What will we do?
Your authorized Audi dealer will install an improved catalytic converter and updated Engine
Control Module (ECM) software. This work will take about three hours to complete and will be
performed for you free of charge. Please keep in mind that your dealer may need additional time
for the preparation of the repair, as well as to accommodate their daily workshop schedule.
IMPORTANT! Please note that if the ECM in your vehicle has been “chipped,” “tuned,” or
otherwise modified from original factory specifications with aftermarket components
and/or software, work needed to repair, replace, or return the ECM to original factory
specifications is NOT covered under this action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer as soon
as possible to schedule this service. For your convenience, you can also visit www.audiusa.com
and click on the “Find a Dealer” link to locate a dealer near you and schedule this service.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please forward
this letter immediately via first-class mail to the lessee within ten (10) days of receipt. If you have
changed your address or sold the vehicle, please fill out the enclosed prepaid Owner Reply card
and mail it to us so we can update our records.
Important information for California regulations require that this campaign be completed prior to the time you renew your
California Vehicle Owners vehicle registration. Therefore, please make sure that this campaign is completed prior to
the renewal of your vehicle registration, and that you furnish proof of completion to the
– California Regulations
Department of Motor Vehicles (DMV) in the form of a copy of the dealer’s repair order, including
a signed “Proof of Correction” certificate. You obtain this from your dealer after the campaign has
been completed. Please retain the signed “Proof of Correction Certificate” with your vehicle
records. DO NOT MAIL THIS FORM to the DMV, unless requested.
Can we assist you
further?
If your authorized Audi dealer fails or is unable to complete this work free of charge within a
reasonable time, please contact Audi Customer Experience at 1-800-253-2834 or via our
“Contact Us” page at www.audiusa.com.
Checking your vehicle for
open Recalls and Service
Campaigns
To check your vehicle’s eligibility for repair under this or any other recall/service campaign, please
visit the Recall/Service Campaign Lookup tool at www.audiusa.com and enter your Vehicle
Identification Number (VIN).
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
26M7 Page 4 of 15
Customer Letter Example (CANADA)
This notice applies to your vehicle: ,
Subject:
Software
Emissions Recall 26M7 - Catalytic Converter & Engine Control Module (ECM)
Dear Audi Owner,
This notice is sent to you in accordance with the requirements of the Canadian Environmental Protection Act, 1999. Audi![]()
has determined that a defect, which relates to a prescribed emission standard, exists in certain 2011-2012 model year
Audi Q7 vehicles. Our records show that you are the owner of a vehicle affected by this action.
What is the issue?
Under certain high load and/or highway driving conditions vehicle exhaust temperatures
may increase catalyst aging, due to thermal stress, which could lead to elevated tailpipe
emissions.
What will we do?
Your authorized Audi dealer will install an improved catalytic converter and updated Engine
Control Module (ECM) software. This work will take about three hours to complete and will
be performed for you free of charge. Please keep in mind that your dealer may need
additional time for the preparation of the repair, as well as to accommodate their daily
workshop schedule.
IMPORTANT! Please note that if the ECM in your vehicle has been “chipped,”
“tuned,” or otherwise modified from original factory specifications with aftermarket
components and/or software, work needed to repair, replace, or return the ECM to
original factory specifications is NOT covered under this action.
What should you do?
In order to limit any possible inconvenience, please contact your authorized Audi dealer as
soon as possible to schedule this service. On or about February 27, 2020 the necessary
repair instructions and parts will be available to your authorized Audi dealer.
Lease vehicles and
address changes
If you are the lessor and registered owner of the vehicle identified in this action, please
forward this letter immediately via first-class mail to the lessee within ten (10) days of receipt.
If you have changed your address or sold the vehicle, please fill out the enclosed prepaid
Owner Reply card and mail it to us so we can update our records.
Can we assist you
further?
If your authorized Audi
dealer fails or is unable to complete this work free of charge within a
reasonable time, please contact Audi Customer Relations Monday through Friday from 8AM
to 8PM EST at 1-800-822-2834 or via our “Contact Audi
Canada” page at www.audi.ca.
We apologize for any inconvenience this matter may cause; however we are taking this action to help ensure your vehicle
continues to meet and exceed your expectations.
Sincerely,
Audi Customer Protection
The repair information in this document is intended for use only by skilled technicians who have the proper tools, equipment and training to correctly and safely maintain your vehicle. These
procedures are not intended to be attempted by “do-it-yourselfers,” and you should not assume this document applies to your vehicle, or that your vehicle has the condition described. To
determine whether this information applies, contact an authorized Audi dealer. 2020 Audi of America, Inc. and Audi Canada. All Rights Reserved.
February 2020
26M7 Page 5 of 15
Campaign Work Procedure
26M7 Emissions Recall
NOTE
•
These repair instructions may differ from the labor operations and labor times listed in ELSA.
•
Damages resulting from improper repair or failure to follow these work instructions are the dealer’s
responsibility and are not eligible for reimbursement under this action.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
- 🔥🔥🔥🚀 【2026 Professional All-System Diagnostic...
- 🛠【28+ Essential Service Resets & Special Functions...
- ⚡ 【Advanced Bidirectional Active Test for Precise Fault...
- 🌐 【Wide Vehicle Coverage & 2026 New Car Support with...
- 💻 【Powerful Hardware & FCA
SGW Bypass for Enhanced...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Circular 26M7
Replacement Service Bulletin Number:
MFR Communication Date: 2020-02-27
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford
, for Lincoln
, and for Mazda
ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.




