NHTSA ID Number: 10171584
Manufacturer Communication Number: TSB190042-012120
TSB/Document Date: 2020-02-24
Summary
This Technical Service Bulletin describes the verification and resolution of a STOP engine light with fault code 2636 or an amber engine light with fault code 1894 as caused by turbocharger actuator overheating. This is an update to a previously submitted communication.
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Technical Service Bulletin
Technical Service Bulletin: TSB190042
Released Date: 21-Jan-2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger
Actuator Overheating: FC2636 and FC1894
New Vented Coolant Drain Line Kit to Reduce
Variable Geometry Turbocharger Actuator
Overheating: FC2636 and FC1894
Warranty Statement
The information in this document has no effect on present warranty coverage or repair practices,
nor does it authorize TRP or Campaign actions.
Contents
Product Affected
Engines:
ISL9 CM2350 L101
L9 CM2350 L123B
Original Equipment Manufacturer (OEM):
Pierce
Fire Truck
Nova
Gillig
MCI
ADL
EL-DORADO
NABI
Autocar
Transit
Fire Truck
Issue
Symptom:
STOP ENGINE light with FC2636
Amber lamp with FC1894
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
1/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Root Cause:
Turbocharger actuator overheating.
Verification
Active or logged occurences of fault codes 2636 or 1894.
Verify unit is not equipped with new vented turbocharger coolant drain line kit part number.
See Table 1 below.
Resolution
Replace turbocharger actuator vented coolant drain line with corresponding kit.
Service Instructions
New turbocharger actuator vented coolant drain line kits are available with a horizontal or
vertical outlet.
Turbocharger actuator vented coolant drain line orientation must be determined in order to
determine correct service kit to be ordered. See Figures 1, 2, 3, and 4 for existing product and
service kit layouts.
See Figure 5 for new production routing.
See Table 1 for kit part numbers.
For new turbocharger actuator coolant drain line kit installation, see corresponding Service
Manual. Reference Procedure 008-017 in Section 08.
Dips or sags of the coolant vent line below the bottom surface of the actuator should be
avoided. If the coolant vent line to the OEM top tank, dips or sags below the bottom surface of
the turbocharger actuator, the coolant vent line must be shortened and raised to be above the
top surface of the turbocharger actuator. See Figure 1 below.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
2/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Figure 1, Coolant Vent Line Routing. OEM Top Tank (1). VGT Actuator (2).
Service Parts Availability
Service kits contain a new turbocharger actuator vented coolant drain tube with vent
accommodation, turbocharger vent line and associated hardware.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
3/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Figure 2, Existing Production Turbocharger Actuator Coolant Lines, Part Number 4352363.
Figure 3, New Turbocharger Actuator Coolant Lines Kit with Horizontal Outlet, Part Number
5473157.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
4/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Figure 4, New Turbocharger Actuator Coolant Lines Kit with Vertical Outlet, Part Number
5473158.
Figure 5, New Self-Assembled Turbocharger Actuator Coolant Lines Kit, Part Number 5473159.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
5/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Figure 6, Existing Production Turbocharger Actuator Coolant Drain Tube With Vent
Accommodation (Left), Part Number 5302803. New Production Turbocharger Actuator Coolant
Drain Tube with Vent Accommodation (Right), Part Number 5446929.
Service Parts Availability
Service parts are available. See Table 1 for part numbers.
Table 1, Service Parts
Part
Description
Existing Part
Number
Obsolete
Superseded
New Part
Number
Horizontal
vented coolant
drain Out Kit
4352363
No
No
5473157
Vertical vented
coolant drain
Out Kit
4352363
No
No
5473158
Self- Assembled
Kit
4352363
No
No
5473159
Table 2, Kit Part Number and Confirmed Application Compatibility
Kit Part Number
OEM
5473157
Pierce Fire Trucks
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
6/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Table 2, Kit Part Number and Confirmed Application Compatibility
Kit Part Number
OEM
5473158
Nova
Gillig
MCI
ADL
EL-DORADO
NABI
5473159
Part Identification
A Plain Pipe Coupler is required at the EGR coolant out vent location to install the new
turbocharger vent lines. See Figure 6 for example of EGR vent line installed with the necessary
plain pipe coupler. See Figure 7 for example of EGR cooler vent line installed without Plain Pipe
Coupler. If engine does not have the plain pipe coupler installed see Table 3 for additional part
number to order to install new turbocharger vent lines.
Figure 7, EGR Vent Line Installed with Plain Pipe Coupler.
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
7/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Figure 8, EGR Vent line without Plain Pipe Coupler.
Table 3, Additional Part Number Needed
Plain Pipe Coupler
Present
Represented Figure
Action
Part Number
Yes
Figure 7
None
Not Applicable
No
Figure 8
Order Plain Pipe
Coupler
5297873
Production Status
Implemented for production. See Table 4.
Table 4, Production Information
ESN First
Build Date1
Plant
74287491
16 March 2018
Rocky Mount Engine Plant
1
Engine build date can be found on engine dataplate.
Document History
Date
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
Details
8/9
1/28/2020
New Vented Coolant Drain Line Kit to Reduce Variable Geometry Turbocharger Actuator Overheating: FC2636 and FC1894
Date
Details
2019-3-19
Module Created
2019-6-20
Product Problem Solving (PPS)
2020-1-21
Added Part Identification Section
Last Modified: 21-Jan-2020
https://quickserve.cummins.com/qs3/pubsys2/xml/en/tsb/2019/tsb190042.html
9/9
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: TSB190042-012120
Replacement Service Bulletin Number:
MFR Communication Date: 2020-01-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.