NHTSA ID Number: 10171430
Manufacturer Communication Number: N192291100 01
TSB/Document Date: 2020-02-18
Summary
Special Coverage (Revised Warranty). Some vehicles equipped with a 2.4L engine (RPO LEA) may exhibit excessive engine oil consumption (less than 2,000 miles [3,200 km] per quart [0.946 L] of engine oil), due to piston ring wear. If this condition is present, an audible rattle or knock from the engine may be heard. The engine oil pressure telltale may illuminate on the instrument panel or the following message may appear in the Driver Information Center: "Oil Pressure Low ? Stop Engine". Dealers are to perform an oil consumption test and install new pistons and piston rings if excessive consumption is found. In addition, dealers are to repair or replace any engine components that require repair or replacement if the need for such repair or replacement was solely caused by excessive oil consumption due to piston ring wear. The repairs will be made at no charge to the Customer.
Special Coverage Adjustment
N192291100 Excessive Engine Oil Consumption – US Only
Release Date:
Revision Description:
Attention:
January 2020
Revision:
01
This bulletin has been revised to update the labor time. Please discard all copies of
N192291100.
This Special Coverage can be seen in the Applicable Warranties section in Investigate Vehicle History
(IVH).
Model
Equinox
Terrain
Model Year
From
To
2013
2013
RPO
LEA
Description
Engine-Gas, 4 Cyl, 2.4L
Involved vehicles are identified on the Applicable Warranties section in GM Global Warranty Management system. This
site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs.
Condition
Special
Coverage
Adjustment
Some 2013 model year Chevrolet
Equinox and GMC
Terrain vehicles equipped with a 2.4L engine
(RPO LEA) may exhibit excessive engine oil consumption (less than 2,000 miles [3,200 km] per quart
[0.946 L] of engine oil), due to piston ring wear. If this condition is present, an audible rattle or knock
from the engine may be heard. The engine oil pressure telltale may illuminate on the instrument panel
or the following message may appear in the Driver Information Center: "Oil Pressure Low – Stop
Engine".
This special coverage covers the condition described above for a period of 7 years and 6 months or
120,000 miles (193,000 km), whichever occurs first, from the date the vehicle was originally placed in
service, regardless of ownership.
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after
January 17, 2020, are covered by this special coverage and must be submitted using the labor operation
codes provided with this bulletin. Claims with repair orders prior to January 17, 2020, must be submitted
to the Service Contract provider.
Correction
Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are
eligible for reimbursement of their reasonable and customary expenses in accordance with the
procedures specified below. The conditional right to reimbursement is provided by GM solely in the
interest of customer satisfaction and is personal to Customers. Customers may not assign and GM
does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to
receive reimbursement, or any other rights granted by this Special Coverage to any third party,
including but not limited to service contract providers, and this Special Coverage is not intended to
and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights
to reimbursement, against GM, whether in law, equity or otherwise, on any third parties.
Dealers are to perform an oil consumption test and install new pistons and piston rings if excessive
consumption is found. In addition, dealers are to repair or replace any engine components that require
repair or replacement if the need for such repair or replacement was solely caused by excessive oil
consumption due to piston ring wear. The repairs will be made at no charge to the Customer.
Copyright 2020 General Motors
. All Rights Reserved.
Page 1 of 4
Special Coverage Adjustment
N192291100 Excessive Engine Oil Consumption – US Only
Parts
Quantity
1
1
1
1
1
1
1
1
1
1
1
2
8
1
1
5
2
1
Part Name
GASKET KIT, CYL HEAD
GASKET KIT, CM/SHF CVR
GASKET, ENG FRT CVR
GASKET, CTLTC CONV PIPE SEAL
CHAIN, KIT
CHAIN ASM, W/PUMP AND BALR SHF
TENSIONER ASM, W/PMP & BALR SHF CHAIN
GUIDE, BALR CHAIN (UPPER)
GUIDE, BALR CHAIN ADJ
SEAL, CR/SHF FRT OIL
BOLT, HFH W/CON WA
BOLT, CM/SHF POSN ACTR
BOLT, CON ROD
PISTON, KIT
FILTER, ENGINE OIL
OIL, ENG DEXOS1 GEN2
SEALANT, RTV
Coolant, Engine, Dexcool Antifreeze
Part No.
12637166
12609291
24435052
24505057
12680750
12635427
12649233
90537336
90537299
12584041
11589123
11588844
11570825
12683595
12605566
88865635
19369831
12346290
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts
to confirm RIM managed status. Parts may have quantity limiters in effect.
Parts required to complete this recall are to be obtained from General Motors
Customer Care and Aftersales
(GMCC&A). Please refer to your “involved vehicles listing” before ordering parts. Normal orders should be placed on a
DRO = Daily Replenishment Order. In an emergency situation, parts should be ordered on a CSO = Customer Special
Order. A quantity limiter may be in effect.
Warranty Information
Labor
Operation
9900658
9900659
Description
Oil Consumption Test Setup - No Repair Required
Piston and Piston Ring Replacement (Includes Oil Consumption
Test)
- AWD
- FWD
Labor
Time
0.2
Trans.
Type
ZREG
ZREG
Net
Item
N/A
N/A
13.0
12.6
Service Procedure
Customers will be notified of the Special Policy by General Motors
(see copy of owner letter included with this bulletin).
Note: This special policy covers repairs after the original powertrain warranty has expired. For vehicles still covered under
the original powertrain warranty, the labor code operations should be used from bulletin 13-06-01-003.
Note: Technicians should perform an oil consumption test to determine if the pistons and rings must be replaced.
Follow the latest version of Corporate Bulletin Number 01-06-01-011 to perform an oil consumption test.
Determine the rate of oil consumption.
•
If the oil consumption test indicates that the rate of consumption is equal to or less than 1 quart (0.946L) of oil
every 2,000 miles (3,200 km), note the oil consumption rate and explain to the customer that their engine meets
the guidelines for oil consumption at this time. No further action is required.
•
If the oil consumption test indicates that the rate of consumption is greater than 1 quart (0.946 L) of oil every
2,000 miles (3,200 km), note the oil consumption rate, and replace the pistons and rings.
Note: The repair is to replace the pistons and rings. In some cases, the bore surface may not have a uniform look to the
finish (zebra stripes) as shown in Technical Service Bulletin 13-06-01-003. As a result, some technicians may question
whether the engine should be repaired or replaced. After careful evaluation, GM Powertrain has determined that the new
pistons and rings will perform correctly in bores that have this appearance, so engine replacement should not be
necessary. The cylinder bores do not need any machine or honing work performed on them. Refer to Technical Service
Bulletin 13-06-01-003 for more information.
Page 2 of 4
Special Coverage Adjustment
N192291100 Excessive Engine Oil Consumption – US Only
Piston and Ring Replacement Procedure
2146346
Note: Review the following service procedures and technical bulletin in SI:
•
Technical Service Bulletin 13-06-01-003 placing a special emphasis on the PCV orifice between the #2 and #3
intake runners.
•
Piston and Connecting Rod Disassemble
•
Piston and Connecting Rod Assemble
•
Piston Connecting Rod, and Bearing Installation (LAF, LAT, LE5, LE9, LEA, or LUK)
Note: The SI procedure for Piston, Connecting Rod, and Bearing Replacement has been updated to reflect in vehicle
piston replacement.
Replace the pistons. Refer to Piston, Connecting Rod, and Bearing Replacement in SI.
Courtesy Transportation
Courtesy transportation is available for Customers whose vehicles are being repaired under this special coverage
adjustment.
Customer Notification
General Motors
will notify Customers of this special coverage on their vehicle (see copy of Customer letter included with
this bulletin).
Customer Reimbursement
Customers have been advised via a separate letter (attached as noted above) on how they may seek reimbursement for
prior out of pocket repair or rental vehicle costs which would have been covered by this special coverage adjustment.
Dealer should not process any requests for customer reimbursement for previous repairs addressed by this special
coverage but direct the customer to timely submit the claim form attached to their letter.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 3 of 4
Special Coverage Adjustment
N192291100 Excessive Engine Oil Consumption – US Only
January 17, 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors
Customer:
As the owner of a 2013 model year Chevrolet
Equinox or GMC
Terrain, your satisfaction with our product is very important
to us.
This letter is intended to make you aware that some 2013 model year Chevrolet
Equinox or GMC
Terrain vehicles,
equipped with a 2.4L engine, may exhibit excessive engine oil consumption (less than 2,000 miles [3,200 km] per
quart [0.946 L] of engine oil), due to piston ring wear. If this condition is present, an audible rattle or knock from the
engine may be heard. The engine oil pressure warning light may illuminate on the instrument panel or the following
message may appear in the Driver Information Center: “Oil Pressure Low – Stop Engine.”
Do not take your vehicle to your GM dealer as a result of this letter unless you believe that your vehicle has the
condition as described above.
What We Have Done: General Motors
is providing owners with additional protection for the condition described
above. If this condition occurs on your 2013 model year Chevrolet
Equinox or GMC
Terrain within 7 years and 6 months
of the date your vehicle was originally placed in service or 120,000 miles (193,000 km), whichever occurs first, the
condition will be repaired for you at no charge. Diagnosis or repair for conditions other than the condition described above
is not covered under this special coverage program.
What You Should Do: It is a good idea to check the engine oil level at each fuel fill. Your vehicle owner manual has
instructions on checking engine oil in the Vehicle Care section. If you believe that your vehicle has the condition described
above, and it is within both the time and mileage limits set forth above, diagnosis, and repairs and adjustments if needed,
which qualify under this special coverage must be performed by a General Motors
dealer. You may want to contact your
GM dealer to find out how long they will need to have your vehicle so that you may schedule the appointment at a time
that is convenient for you. This will also allow your dealer to order parts if they are not already in stock. Keep this letter
with your other important glove box literature for future reference.
Reimbursement: If you have previously paid for repairs solely caused by the condition described in this letter (including
piston assembly repair or replacement and/or repair or replacement of other engine components that was required
and caused solely as the result of excessive oil consumption due to piston ring wear) within the time and mileage limits
of the Special Coverage, or if you incurred reasonable rental vehicle costs while such repairs were being performed, you
may complete the enclosed reimbursement claim form along with supporting documents showing that the repairs were
required and performed solely as the result of excessive oil consumption due to piston ring wear. The completed claim
form and required documentation of eligible expenses must be postmarked no later than May 16, 2020 to the following
address:
2.4 Liter Oil Consumption Litigation
c/o Analytics Consulting LLC
P.O. Box 2003
Chanhassen, MN 55317-2003
Repairs that were performed after the expiration of the time or mileage limits of this Special Coverage are not
eligible for reimbursement.
The right to submit reimbursement claims is provided by GM solely in the interest of customer satisfaction and is
personal to vehicle owners and lessees who previously paid for repairs within the time and mileage limits of this Special
Coverage (“Customers”). Customers may not assign and GM does not consent to any assignment of any Customer’s
right to submit reimbursements claims, or to receive reimbursement, or any other rights granted by this Special
Coverage to any third party, including but not limited to service contract providers, and this Special Coverage
is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any other
rights to reimbursement, against GM, whether in law, equity or otherwise, in favor of any third parties.
If you have any questions or need any assistance with obtaining repairs covered under this Special Coverage,
please contact your dealer or the appropriate Customer Assistance Center at the number listed below.
Division
Chevrolet![]()
GMC![]()
Number
1-800-222-1020
1-800-462-8782
Text Telephones (TTY)
1-800-833-2438
1-800-889-2438
We are sorry for any inconvenience you may experience; however, we have taken this action in the interest of your
continued satisfaction with our products.
Sincerely,
GENERAL MOTORS
LLC
Page 4 of 4
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5301
URGENT - DISTRIBUTE IMMEDIATELY
Date:
January 28, 2020
Subject: N192291100-01 - Special Coverage
Excessive Engine Oil Consumption
Revised Warranty section
Models: 2013 Chevrolet
Equinox
2013 GMC
Terrain
Equipped with 2.4L Engine (RPO LEA)
To:
All General Motors
Dealers
This bulletin has been revised to update the labor time. Please discard all copies of
N192291100.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N192291100 01
Replacement Service Bulletin Number:
MFR Communication Date: 2020-01-17
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: AIR BAGS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Stay Updated with Lifetime Access: This obd2 scanner includes lifetime free software updates for all app service functions. With a single payment, enjoy full access to diagnostics, reset tools, and maintenance features — zero subscription fees. A budget-friendly choice for weekend mechanics, home car owners, and DIYers, supporting vehicles from 1996 onward. Come to us with your VIN to check compatibility.
- Full Bidirectional Control/Active Tests & Stable Wireless Connectivity: This car code reader features full bidirectional control, allowing you to send commands to the vehicle's ECU for active tests on components such as fuel pumps, injectors, A/C clutches, windows, sunroofs, and more. This car scanner diagnostic tool helps DIYers quickly diagnose and test vehicle parts, cutting down troubleshooting and repair time. With BT 4.0 wireless connectivity, you can enjoy cable-free diagnostics up to 33 feet. Stand in your garage and test windows, wipers, or even engine components—all without needing to move around your car.
- Portable Car Scanner with 26 Special Functions: Scheduled vehicle maintenance with the A30M car diagnostic scanner can keep your vehicle in peak condition and save you big on dealership trips. The XTOOL A30M obd2 scanner diagnostic tool features essential reset and relearn functions, such as Oil Reset, EPB Reset (Electronic Parking Brake Release), SAS, ABS Brake Bleeding, Throttle Body Relearn, Injector Coding, Crank Sensor Relearn, Headlight Adjustment, and Tire Size Reset. Note: Service functions may vary by vehicle model – check compatibility beforehand!
- Wide Compatibility CAN FD & FCA
Autoauth: This obd2 scanner diagnostic tool is compatible with over 85+ car brands from the U.S., Europe, and Asia, providing extensive coverage through a BT connection with your smartphone or iPad. Now upgraded to support the latest protocols, it includes FCA
AutoAuth access for Chrysler
, Jeep
, Dodge
, and Fiat
(2018+), and supports CAN FD for GM (2020+) models, giving you greater access to newer vehicles and systems. Note: The FCA
AutoAuth account is not included with the device. Users must register and pay separately through the official FCA
AutoAuth website to access diagnostic functions for vehicles that require it. - Up to 8 Live Data Streams Graphing – Real-Time Graphing for Deeper Insight: This car scanner supports up to 8 live data streams simultaneously with intuitive, real-time graphing. Gain comprehensive insights into your vehicle’s performance, making it easier to spot issues, detect trends, and make informed diagnostic decisions with confidence.
- Comprehensive OBD2 Scanner with 16 Resets: The XTOOL D5S car code reader and vehicle reset tool provides an advanced diagnostic solution with 16 commonly needed reset functions, including Electronic Parking Brake Reset (EPB Reset), SAS, BMS Reset (Battery Test), Throttle Body Relearn, TPMS Reset, ABS Bleeding, Injector Coding, Gearbox Match, Suspension Adjustment, Headlight, Window Initialization, Crank Sensor Relearn and more. Equipped with CAN FD Protocol and FAC AutoAuth, the D5S obd2 scanner diagnostic tool ensures compatibility with a broad range of modern vehicles, allowing users to address common maintenance needs quickly. NOTE: Please Check the Compatibility before ordering.
- 4 Main System Car Scanner & Full OBD2 Diagnostics: The XTOOL D5S car code reader is ideal for home mechanics, DIYers, and professionals, providing access to Transmission/Engine/ABS/SRS systems to read DTCs, Live data can be displayed in text or up to 4 PID data graphs, along with full OBD2 diagnostics to check the engine light on, other obd2 issues and routine maintenance. This car diagnostic scanner ensures you can keep your vehicles in top condition, avoiding costly repairs or unexpected breakdowns. NOTE: Some vehicles display three systems after connection because the transmission and engine of some vehicles are integrated into one.
- Check Engine Code Reader & Real-Time Engine Monitoring: Whether you're a car owner, a DIYer, or run a repair shop, the XTOOL D5S obd2 scanner diagnostic tool makes engine diagnostics fast and frustration-free, reading and explaining trouble codes in seconds—no confusion. Check live data like fuel trim, 02 sensor voltage, RPM, and coolant temp to pinpoint mis~fires, rough idle, or sensor issues. After repairs, simply use the D5S check engine code reader and reset tool to turn off the check engine light and confirm the problem’s fixed—saving time, money, and unnecessary shop visits. - Note: If the check engine light comes back on, it indicates the original problem still exists.
- Portable Car Scanner for ABS and SRS: XTOOL D5S gives you peace of mind when ABS or airbag warning lights come on. It reads and clears ABS codes to help you fix brake sensor, traction control, or wheel speed issues, and supports ABS bleeding after repairs like caliper or master cylinder replacement. For airbag systems, it scans and clears SRS codes related to airbags, seatbelt tensioners, and crash sensors. Whether you're doing repairs at home or running a small shop, the D5S is a cost-effective solution for safety diagnostics. Note: If a fault code returns after clearing, it usually means the issue hasn’t been fully resolved. Please check the compatibility before ordering.
- Transmission Warning Light ON? Here’s the Transmission Diagnostic and Reset Tool You Need: The XTOOL D5S is more than just a basic car scanner—it’s an easy-to-use transmission diagnostic tool. From rough shifts to slipping gears, the D5S lets you read and clear transmission trouble codes, monitor real-time TCM data, and perform transmission resets after fluid changes or repairs. Whether you’re a hands-on car owner or a pro running a busy shop, this OBD2 scanner with transmission functions helps you catch problems early—saving you time, money, and future headaches.. Note: Clearing fault codes is equivalent to a reset on some vehicles, but not all. For help, contact XTOOL Tech Support.
- Save $500+/Year with Pro-Level Diagnostics -No Subscriptions: The Portable XTOOL Anyscan A30D OBD2 scanner diagnostic tool includes free lifetime software updates for all app service functions, without extra cost. With a single payment, enjoy full access to diagnostics, relearn scan tools, and maintenance features. A cost-effective, smart choice for car owners and DIY enthusiasts, compatible with vehicles from 1996 onward. Please provide the car VIN and the special functions you need in advance so that we can confirm compatibility
- Bi-Directional Control for Faster Troubleshooting: Unlike a basic code reader, the A30D bi directional scan tool sends commands directly to your vehicle’s ECU to actively test components like fuel pump, valves, wipers, windows, doors, sunroof, and headlamps right from your smartphone. See component responses in real time without disassembly—perfect for brake jobs, electrical issues, and hard-to-find problems. This bidirectional obd2 scanner helps pinpoint faults faster, reduce guesswork, and avoid replacing good parts. An efficient, easy-to-use car scanner diagnostic tool built for DIYers, home garage users, and small-shop technicians who want real two-way scanner, not just codes
- 19 Reset Functions for Routine Maintenance: The A30D car diagnostic scanner provides 19 relearn functions without extra charges, including EPB Reset for parking brake replacement, TPMS Reset after tire changes, ABS Auto Bleeding, Oil Reset, SAS Reset, BMS Reset, Throttle Relearn, Injector C0ding, Gear Learning, Crank/Crankshaft/Cam/Ckp Sensor Relearn Tool, Transmission Match, Seat Calibration, Airbag Repair and more. This XTOOL A30D automotive scanner diagnostic tool supports preventive care, helping extend vehicle life and reduce costly shop visits. Functions vary by vehicle make and year—plz confirm compatibility before purchase
- Stable BT Connection & All-System & 8 Pids Live Data: The A30D wireless OBD2 scanner delivers a fast and stable wireless connection up to 33 feet, letting you move freely around the vehicle without tangled cables. Pair with with Android 9.0+ and iOS 10.0+ devices to turn your phone into a mobile auto scanner—perfect for home garages, driveways, or on-the-spot repairs. This full system scanner for cars provides real-time access to all major modules, including Engine, Gearbox, ABS, SRS, AC and more. with clear graphs, meters, and up to 8 PIDs displayed at once. This car code reader makes system monitoring visual, simple, easy to understand, and offering data logging for playback and deeper
- Wide Compatibility with CAN-FD & FCA
Support: The A30D car computer diagnostic reader works with most 1996 and newer vehicles with a standard OBD2 port, including for Ford
, for GM, for Toyota
, for Honda
, for Nissan
,for Hyundai
etc, with ongoing updates covering more car models and functions later. It also supports newer communication protocols like CAN-FD and FCA
AutoAuth (Personal AutoAuth account and active subscription required, not included with the device!for Chrysler
, for Dodge
, for Jeep
, for Fiat
models). It is a future-ready automotive scanner diagnostic tool for households with multiple vehicles or part-time techs. Coverage vary by cars, plz check the compatibility first
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




