NHTSA ID Number: 10171422
Manufacturer Communication Number: N182201660
TSB/Document Date: 2020-02-18
Summary
Special Coverage - on certain vehicles if a driver repeatedly sits on the seat belt cable cover located atthe base of the driver?s seat when entering the vehicle, it may cause the seat belt pretensioner to bend sharply over theseat side shield. If this continues to occur over an extended period of time, which is very rare, the seat belt pretensionercable may fatigue and eventually separate, which could reduce the effectivenessof the driver?s seat belts. Before any damage occurs to the pretensioner cable itself, signs of wear will be visible on thepretensioner cable cover where it has been repeatedly bent over the seat side shield. Dealers are to inspect the driver seat belt lap anchor pretensioner and replace if necessary. The repairs will be made atno charge to the customer.
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
Release Date:
Attention:
Make
Chevrolet![]()
January 2020
Revision:
00
This Special Coverage can be seen in the Applicable Warranties section in Investigate Vehicle History
(IVH).
Model
Camaro
Model Year
From
To
2016
2018
RPO
Description
Involved vehicles are identified on the Applicable Warranties section in GM Global Warranty Management system. This
site should always be checked to confirm vehicle involvement prior to beginning any required inspections and/or repairs.
Condition
Special
Coverage
Adjustment
On some 2016-2018 model year Chevrolet
Camaro vehicles, if a driver repeatedly sits on the seat belt
cable cover located at the base of the driver’s seat when entering the vehicle, it may cause the seat belt
pretensioner to bend sharply over the seat side shield. If this continues to occur over an extended period
of time, which is very rare, the seat belt pretensioner cable may fatigue and eventually separate, which
could reduce the effectiveness of the driver’s seat belts. Before any damage occurs to the pretensioner
cable itself, signs of wear will be visible on the pretensioner cable cover where it has been repeatedly
bent over the seat side shield.
This special coverage covers the condition described above for a period of 10 years or 120,000 miles
(193,000 km) whichever occurs first, from the date the vehicle was originally placed in service,
regardless of ownership.
For vehicles covered by Vehicle Service Contracts, all eligible claims with repair orders on or after
January 16, 2020, are covered by this special coverage and must be submitted using the labor operation
codes provided with this bulletin. Claims with repair orders prior to January 16, 2020, must be submitted
to the Service Contract provider.
Correction
Vehicle owners or lessees who paid for repairs referenced in this Special Coverage (“Customers”) are
eligible for reimbursement of their reasonable and customary expenses in accordance with the
procedures specified below. The conditional right to reimbursement is provided by GM solely in the
interest of customer satisfaction and is personal to Customers. Customers may not assign and GM
does not consent to any assignment of any Customer’s right to submit reimbursement claims, or to
receive reimbursement, or any other rights granted by this Special Coverage to any third party,
including but not limited to service contract providers, and this Special Coverage is not intended to
and does not confer any third party beneficiary, subrogation or contribution rights, or any other rights
to reimbursement, against GM, whether in law, equity or otherwise, on any third parties.
Dealers are to inspect the driver seat belt lap anchor pretensioner and replace if necessary. The repairs
will be made at no charge to the customer.
Parts
Quantity
1
1
1
Part Name
Tensioner Kit, D/Seat belt (retr si)(black)
Retainer, F/Seat adjr fin cvr – LH
Cover Kit, F/Seat & F/Seat bk*Black
Part No.
19333450
84559455
84858288
Parts required to complete this recall are to be obtained from General Motors
Customer Care and Aftersales (GMCCA).
Please refer to your “involved vehicles listing” before ordering parts. Parts should be ordered on a CSO = Customer
Special Order.
Due to the small number of vehicles involved, less than .08% and due to limited initial parts availability, dealers are
encouraged not to order program parts for use as shelf stock. Parts should only be ordered when inspection
determines that it is necessary.
Reminder: Parts may be removed from Retail Inventory Management (RIM). Dealers should review the affected parts
to confirm RIM managed status. Parts may have quantity limiters in effect.
Copyright 2020 General Motors
. All Rights Reserved.
Page 1 of 7
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
Warranty Information
Labor
Operation
9900660
9900661
9900662
9900663
*
Description
Diagnostic Time Only – No Repair Required
Replace Driver Seat Belt Tensioner Kit and Seat Cushion Outer
Finish Cover (Includes Inspection and Pyrotechnic Devise Disposal)
Customer Reimbursement Approved
- For USA and Canada dealers only
- For Export dealers only
Customer Reimbursement Denied – For USA dealers only
Labor
Time
0.2
0.6
Trans.
Type
Net
Item
N/A
N/A
ZREG
*
N/A
0.2
N/A
**
For USA and Canada: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement. Submit $20.00
administrative allowance in Net/Admin Allowance.
For Export: Submit the dollar amount reimbursed to the Customer in Net/Reimbursement.
**
Submit $10.00 administrative allowance in Net/Admin Allowance.
Service Procedure
Use the following steps to inspect the driver seat belt pretensioner cable cover for damage. If the cable cover displays
damage, it will be necessary to replace the affected front seat belt pretensioner kit and seat cushion finish cover.
1.
Move the driver seat to the full forward and full down position.
2.
Inspect the seat belt pretensioner cable cover for damage. Inspect the complete cable cover from the base of the
cable to the latch. Damage includes any splits, holes or cracks.
5483528
3.
Flex the seat belt in an outboard direction and look on inboard side of driver seat seatbelt anchor cover for damage.
Page 2 of 7
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
5483529
4.
Flex the seat belt to the inboard side and look on outboard side of driver seat seatbelt anchor cover for damage.
•
•
If any damage is found, replace the driver side front seat belt anchor plate pretensioner and the front seat cushion
outer finish cover, refer to step #5.
If no damage is found, no further action is required. Inform the customer that the special coverage condition is
not present on their vehicle at this time and to keep monitoring as described in the customer letter.
NOTE: When replacing the front seat cushion outer finish cover, it is also necessary to replace the metal cover retainer
and pivot bolt mounted bracket.
5483531
Revised Cover Retainer
5483534
Revised Pivot Bolt Bracket
Page 3 of 7
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
5.
Replace the driver side front seat belt anchor plate pretensioner and the front seat cushion outer finish cover. Refer
to Front Seat Adjuster Finish Cover Replacement and Front Seat Belt Anchor Plate Tensioner Replacement in SI.
Courtesy Transportation – For USA & Canada
Courtesy transportation is available for Customers whose vehicles are involved in a product program and still within the
warranty coverage period. See General Motors
Service Policies and Procedures Manual, Sections 1.4 and 6.1.10, for
courtesy transportation program details.
Customer Notification
General Motors
will notify Customers of this special coverage on their vehicle (see copy of typical Customer letter included
with this bulletin).
Customer Reimbursement
Customer requests for reimbursement of previously paid repairs to correct the condition described in this bulletin are to
be submitted to the dealer prior to or by January 31, 2021. See General Motors
Service Policies and Procedures Manual,
Section 6.1.11 – Product Field Action Customer Reimbursement Procedure (USA & Canada) or local Policies and
Procedures, for details.
GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of
conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained
technicians have the tools, equipment, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT
assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your dealer for information on whether your
vehicle may benefit from the information.
We Support
Voluntary Technician
Certification
Page 4 of 7
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
January 2020
This notice applies to your vehicle, VIN: _____________________________________
Dear General Motors
Customer:
As the owner of a 2016-2018 model year Chevrolet
Camaro, your satisfaction with our product is very important to us.
This letter is intended to make you aware that some 2016-2018 model year Chevrolet
Camaro vehicles, may have a
condition where if a driver repeatedly sits on the seat belt cable cover located at the base of the driver’s seat when
entering the vehicle, it may cause the seat belt pretensioner to bend sharply over the seat side shield. If this continues
to occur over an extended period of time, which is very rare, the seat belt pretensioner cable may fatigue and eventually
separate, which could reduce the effectiveness of the driver’s seat belt. Before any damage occurs to the pretensioner
cable itself, signs of wear will be visible on the pretensioner cable cover where it has been repeatedly bent over the seat
side shield.
Do not take your vehicle to your GM dealer as a result of this letter unless you believe that your vehicle has the
condition as described above.
What We Have Done: General Motors
is providing owners with additional protection for the condition described above.
If this condition occurs on your 2016-2018 model year Chevrolet
Camaro within 10 years of the date your vehicle was
originally placed in service or 120,000 miles (193,000 km), whichever occurs first, the condition will be repaired for you
at no charge. Diagnosis or repair for conditions other than the condition described above is not covered under this
special coverage program.
What You Should Do: Please perform the inspection procedure enclosed with this letter, and follow the instructions
provided. If you are not comfortable performing this inspection, please take your vehicle to a General Motors
dealer
and they will perform this inspection free of charge. If you’ve performed the inspection and believe your vehicle has the
condition described above, please take your vehicle to your GM dealer for repair. For the repair to qualify for this
special coverage, it must be performed by a General Motors
dealer. You may want to contact your GM dealer to find
out how long they will need to have your vehicle so that you may schedule the appointment at a time that is convenient
for you. This will also allow your dealer to order parts if they are not already in stock. Keep this letter with your other
important glove box literature for future reference.
Reimbursement: If you have already paid for repairs for the condition described in this letter, please complete the
enclosed reimbursement form and present it to your dealer with all required documents. Working with your dealer will
expedite your request, however, if this is not convenient, you may mail the completed reimbursement form and all
required documents to Reimbursement Department, PO Box 33170, Detroit, MI 48232-5170. The completed form and
required documents must be presented to your dealer or received by the Reimbursement Department by January 31,
2021, unless state law specifies a longer reimbursement period.
The right to submit reimbursement claims is provided by GM solely in the interest of customer satisfaction and is
personal to vehicle owners and lessees who previously paid for repairs referenced in this Special Coverage
(“Customers”). Customers may not assign and GM does not consent to any assignment of any Customer’s right
to submit reimbursement claims, or to receive reimbursement, or any other rights granted by this Special
Coverage to any third party, including but not limited to service contract providers, and this Special Coverage
is not intended to and does not confer any third party beneficiary, subrogation or contribution rights, or any
other rights to reimbursement, against GM, whether in law, equity or otherwise, on any third parties.
If you have any questions or need any assistance, please contact your dealer or the appropriate Customer Assistance
Center at the number listed below.
Division
Chevrolet![]()
Puerto Rico – English
Puerto Rico – Español
Virgin Islands
Number
1-800-222-1020
1-800-496-9992
1-800-496-9993
1-800-496-9994
Text Telephones (TTY)
1-800-833-2438
We are sorry for any inconvenience you may experience; however, we have taken this action in the interest of your
continued satisfaction with our products.
Neelie O’Connor
Global Executive Director
Customer Experience Operations
Page 5 of 7
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
Enclosures
N182201660
Page 6 of 7
Special Coverage Adjustment
N182201660 Driver Seat Belt Anchor Pretensioner Cable
Customer Inspection Procedure
Use the following steps to inspect the driver seat belt pretensioner cable cover for damage. If the cable cover displays
damage, it will be necessary to take the car to your dealer for repairs.
1.
Move the driver seat to the full forward and full down position.
2.
Inspect the seat belt pretensioner cable cover for damage. Inspect the complete cable cover from the base of the
cable to the latch. Damage includes any splits, holes or cracks.
3.
Flex the seat belt in an outboard direction and look on inboard side of driver seat seatbelt anchor cover for damage.
4.
Flex the seat belt to the inboard side and look on outboard side of driver seat seatbelt anchor cover for damage.
•
•
If any damage is found, it will be necessary to take the car to your dealer for repairs.
If no damage is found, monitor the condition at regular 7,500 mile intervals as described in the owner manual.
Page 7 of 7
GLOBAL SAFETY FIELD INVESTIGATIONS
DCS5286
URGENT - DISTRIBUTE IMMEDIATELY
Date:
January 21, 2020
Subject: N182201660 - Special Coverage
Seat Belt Lap Anchor Tensioner Cable
Models: 2016 - 2018 Chevrolet
Camaro
To:
All General Motors
Dealers
General Motors
is releasing Special Coverage N182201660 today. The total
number of U.S. vehicles involved is approximately 179,242. Please see the
attached bulletin for details.
Customer Letter Mailing
The customer letter mailing will begin soon.
Global Warranty Management (GWM)
The Applicable Warranties section on the Investigate Vehicle History (IVH) screen will
be updated January 21, 2020. Please hold all warranty transactions until IVH has been
updated.
END OF MESSAGE
GLOBAL SAFETY FIELD INVESTIGATIONS
- Our car seat belt cushion protect and relieve shoulder...
- The surface is made of high-quality polyester, and the inner...
- Easy to install and easy to use, wrap the car seat belt pad...
- These seat belt covers are suitable for all car seat belts...
- Packaging: 2pcs car seat belt pad covers.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: N182201660
Replacement Service Bulletin Number:
MFR Communication Date: 2020-01-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: AIR BAGS
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Obd2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15 reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth obd2 scanner diagnostic tool ideal for diy's and private car owners
- Bidirectional Control for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping Diy users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15 Maintenance Resets: The current version introduces 15 popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford
, Toyota
, Chrysler
, Honda
, Mazda
, Nissan
, Mitsubishi
, Hyundai
, KIA
with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA
cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis.
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford
, Lincoln
, Mazda
, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA
AutoAuth - OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Lifetime Database & Software Updates— No Subscription Fee, No Feature Lock, Save you $399/Y】KINGBOLEN K8 Pro's software can already be permanently upgraded and used for while software of other same price product still needs annual fee of almost $400. K8 pro scanner has packed all capabilities auto technicians would ever need for repair & maintenance services: Added CAN-FD & DOIP protocol, Bluetooth Wireless Diagnosis, Bidirectional Test, ECU Online/Offline Code & Guided Functions for VW
, for Audi
...34+ Restes, Autoauth for FCA
SGW, Larger 4GB+64GB memory, 12600mAh battery, 8'' touch screen with 1280 * 800 Resolution. A Kickstand can allow the tablet to sit at a comfortable angle - 【Newly Added CAN FD & DOIP Protocol】As Upgrade Version of Kingbolen K8, K8 Pro obd2 scanner supports CANFD and DOIP protocol, which will save you 200+ bucks as no need extra buy for special adapter. CANFD protocol suits for the latest GM(2019-), reducing the risk of undetected errors. The DoIP protocol (comes with DoIp cable) fits for 2017+ BMW
(F&G chassis), for Jaguar
& Land Rover
after 2017, for Volvo
after 2018. Plus, K8 Pro's Memory from 2G+32G expanded to 4G+64G, update period extended from 2 years to permanent - 【34+ Hot Special Functions & V.A.G Guide】KINGBOLEN K8 pro bluetooth obd2 scanner covers almost all common services including Oil Reset, EPB, SAS, BMS Reset, ABS bleed, Throttle Reset, Suspension, Injector Code, Power Balance, Transmission Adaptation, Fuel Trim Learn, HVAC Control Module Calibrate, Language Change, A/F Settings, Stop/Start Reset, Crankshaft Sensor Relearn, TPMS, PMI function and etc. Imagine how much money and time you spend on car maintenance every year? K8 pro car scanner will be a good helper and saver for your car. V.A.G Guided function provides step-by-step guide to work for Volkswagen
/Audi
/Skoda. Note: Please send us model/year/vin to check compatibility before order - 【Powerful Bidirectional Test/Active Test & ECU Code】As a bidirectional scan tool, KINGBOLEN K8 pro allows you to request information from a vehicle's ECU or send commands to the vehicle's modules to perform specific tests and functions, such as EVAP Tests, Turn on/off radiator fan, Window/Mirror/Door Lock Test, Pump and Value Tests, Sound horn Test, et. Without using the vehicle control system and dismantling car’s parts, it can quickly and accurately pinpoint the fault causes, simple operation saves time and money
- 【Wireless OE-Level All Systems Diagnostics】Equipped with Bluetooth VCI, you can do car diagnostics out of the car (up to 33F/10M) without being confined to a small space inside the car. Provides the convenience of Auto VIN, K8 pro allowing for easy access and diagnosis of all available modules on a wide range of vehicles, like PCM, ECM, BCM, TPMS, SAS, Fuel System, etc, to perform read/clear codes, view live data, freeze frame, perform active tests, and read ECU info... 12-In-1 Data Stream Graphics make data viewing more intuitive.Diagnostic reports can be shared via QR Code, Bluetooth or email.Built-in Browser and Fault Code Library allows you directly query the fault code when diagnosing
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




