NHTSA ID Number: 10170888
Manufacturer Communication Number: CC-19-50-01
TSB/Document Date: 2020-02-03
Summary
In order to bring the Revero GT into the best performance Karma
Automotive is replacing components on the vehicles in current service. This is a guide to replace to four (4) Brake Lines as indicated in this bulletin
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
PRIORITY: Vehicles on list
PURPOSE:
In order to bring the Revero GT into the best performance Karma Automotive is replacing components
on the vehicles in current service. This is a guide to replace to four (4) Brake Lines as indicated below
(fig. 1) in this bulletin.
Fig. 1
1
2
3
4
C131125003500
C131125003600
C131125001901
C131125600202
Brake line Assembly- MC to EBCM Front LH
Brake line Assembly- MC to EBCM Front RH
Assembly – Brake Line Mid Rear LH
Assembly – Brake Line Mid RH R
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 1 of 12
Published: November 2019
CC-19-50-01.01
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Only the affect vehicle below are subject to this update.
50GK43SB8LA000021
50GK43SB1LA000023
50GK43SB3LA000024
50GK43SB5LA000025
50GK43SB7LA000026
50GK43SB0LA000028
50GK43SB2LA000029
50GK43SB4LA000033
50GK43SB6LA000034
Procedure Overview:
1. Create a TSS case for the affect VIN presented for this operation
2. Disconnect 12V ,Rack and raise the vehicle. Remove all four wheels (220nm fastening torque )
3. Remove the front wheel well liners
4. Remove the Rocker Panel (LH and RH) covers
5. Be prepared to catch and clean up brake fluid as you will experience some spillage
6. Unfasten PTC (HV Fluid heater) ground, Disconnect low voltage connection
7. Loosen the EBCM Bracket, any other component to ease access to the lines on the EBCM and Master
cylinder
7. Loosen and remove the lines from the master cylinder to the EBCM (items #1 and #2 below)
8. Loosen and remove line #3 (list below) from EBCM and the in-line connection under the rocker cover
as shown in image on first page.
9. Reconnect all the lines with the supplied parts for this (LH) side of the vehicle.
10. Remove indicated line #4 (list below) from the unions and replace with the appropriate supplied part.
11. Reinstall lines and ensure all fasteners are torqued to specification, Check for leaks.
12.Reinstall PTC and all PTC connections
13.Perform the Karma Sync Brake Bleed Procedure
12. Reassemble the vehicle, and road test.
1
2
3
4
C131125003500
C131125003600
C131125001901
C131125600202
Brake line Assembly- MC to EBCM Front LH
Brake line Assembly- MC to EBCM Front RH
Assembly – Brake Line Mid Rear LH
Assembly – Brake Line Mid RH R
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 2 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
1. Rack the Vehicle, Disconnect the 12V harness (Fig 2.) and remove all four wheels,
Remove the left front (Fig 3) and right front wheel well liners. there are 12 push pins on each.
Fig. 2
Fig.3
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 3 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
2. Remove the Rocker panel as seen in (Fig 4. and Fig. 5) The Rocker is held in by nine (9) push clips.
Fig. 4
Fig. 5
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 4 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
3.Unfasten PTC ground (torque 7 +/- 1 Nm) (fig. 6). Disconnect low voltage connection. Remove bolt to
PTC (T40) Remove Nut from PTC heater (13mm nut), this is to move the assembly to clear space for
brake line removal and installation (fig.7).
Fig. 6
Fig. 7
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 5 of 12
Published: November 2019
CC-19-50-01.01
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
3. Loosen the EBCM Bracket (fig 8.) to allow further room to unbolt the brake lines. Remove tube nut
(13mm) from master cylinder (fig. 9). Plug parts or catch fluid use Take precaution as fluid will lescape.
Lines 1- (Brake Line Assembly - MC to EBCM Front LH shown removed) and 2 (Brake Line Assembly
- MC to EBCM Front RH C131125003600 in place by red line). For both EBCM and Master cylinder
primary lines the fastening torque is 22 Nm +/- 1nm. (Fig 3) Manuever parts out of the wheel well and
replace using same path as removal to install
Fig. 8
Fig. 9
1
22 +/- 1 Nm
2
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 6 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
4. Remove C131125001901(#3 in Fig. 10) Assembly - Brake Line Mid Rear LH remove tube nut (13mm)
from EBCM (torque is 22 Nm +/- 1nm). Take precaution as fluid will leak. Plug parts or catch fluid. Remove
tube nut (13mm) from union behind rocker take precaution as fluid will leak. Plug parts or catch fluid
Fig. 10
22 +/- 1 Nm
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 7 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
5. Continuing Remove tube nut (13mm) from union behind rocker take precaution as fluid will leak. Plug
parts or catch fluid. (Fig. 11a and Fig. 11b) (Torque 17 +/- Nm). Manuever part out of the wheel well and
replace using same path as removal to install.
Fig. 11a
Fig. 11b
17 +/- 1Nm
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 8 of 12
Published: November 2019
CC-19-50-01.01
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
6.Proceed to unbolt the indicated line (C131125600202 Assembly - Brake Line Mid Rear RH) in
(Fig.12a) from the union behind the upright and under the rocker panel (Fig 12b). The Rocker Trim
panel should be unclipped as indicated before to facilitate the removal of the Brake line #1.
Fig. 12a
1
Fig. 12b
17 +/- 1 Nm
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 9 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
7. The pipe is routed as shown in (fig. 13) remove the fastening clips (one is fastened torque as shown
on install) to extract the line. There is also a union to disassemble the pipes here behind the upright.
(torque 17 +/- 1Nm as shown)
Fig. 13
Fig. 14
17 +/- 1 Nm
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 10 of 12
Published: November 2019
CC-19-50-01.01
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
7. This image illustrates (Fig.15) the manuevering brake line out of the wheel well. Replace using
same path as removal to install.
Fig. 15
8.Check and torque application to EBCM and all other unions
9. Check for leaks
10. Bleed brake system per Karma Sync service procedure
11.Check for leaks
12.Reinstall PTC and all PTC connections
13.Reinstall rocker panels and fender liners
14.Reinstall wheels
15.Reconnect 12V
16. Test drive carefully and ensure normal operation
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 11 of 12
Published: November 2019
CC-19-50-01.01
Type: Satisfaction Campaign
Year: 2019
System: Brakes (50)
Sequence: 01
First Release Rev: 0.1
Title: Brake Line Parts Update
Applicability: MY20 Revero GT Demos
Market Region: All
PARTS REQUIRED:
PART NUMBER
C131125003500
C131125003600
C131125600202
C131125001901
Description
Brake line Assembly- MC to EBCM Front LH
Brake line Assembly- MC to EBCM Front RH
Assembly – Brake Line Mid RH R
Assembly – Brake Line Mid Rear LH
Quantity
1
1
1
1
Description
Clip - Quarter turn w base 9.0
Quantity
18
SHOP SUPPLIES if Required:
PART NUMBER
C145010100000
SPECIAL TOOLS:
Description
N/A
CAUSAL PART:
PART NUMBER
Description
C131125003500
Brake Line Assembly – MC to EBCM Front
LABOR CODES:
CODE
50-50-05-05
Description
TIME
DEFECT CODE
Brake Line Update
3.5
50-50-11-68
SUBLET:
CODE
FLU-002
Description
Brake Fluid
AMOUNT
as needed
WARRANTY DISPOSITION: This repair is covered under the New Vehicle Limited Warranty, in effect
for four (4) years from the in-service date with no mileage limitation.
Karma Automotive Bulletins and service documents are intended for use by experienced and trained Technicians. If you lack the skills, tools, equipment
and a suitable workshop for any procedure described in this document, we suggest you leave such repairs to a Karma retailer and service provider. See
your service provider for advice on whether your vehicle may benefit from the information contained within this document. The information contained in the
Karma Bulletin is accurate at the date of publication. However, Karma Automotive regularly updates technical information. Please check with your Karma
Automotive Retailer and Karma Automotive service provider that the bulletin you intend to use contains the latest available information.
Page 12 of 12
Published: November 2019
- Nickel-copper alloy is very flexible making for super easy...
- Corrosion and Rust Resistant: Copper-nickel alloy resists...
- SAE and ISO Certified: This tubing is tested and verified to...
- Complete Kit with 16 Inverted Flare Fittings: Includes 25 ft...
- Ideal Replacement for Steel Brake Lines: Copper-nickel brake...
- PACKAGE INCLUDE - MuHize Brake Line Kit Replacement with...
- SUPER EASY BENDING & FLARING - MuHize brake lines are easy...
- HIGHER QUALITY - MuHize brake lines are made with unique...
- WIDELY APPLICATION - MuHize 3/16 brake line tubing kit...
- PROFESSIONAL - MuHize focus on outstanding features and...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: CC-19-50-01
Replacement Service Bulletin Number:
MFR Communication Date: 2019-02-04
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SERVICE BRAKES, HYDRAULIC
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
- 🔥【2026 TOP HARDWARE AND SOFTWARE UPGRADE，UPGRADED OF CRP919E】LAUNCH scanner CRP919EBT wireless obd2 scanner has upgraded TOP HARDWARE CONFIGURATION and ADD NEWEST FUNCTIONS. The more FASTER and SMARTER CRP919EBT with 🔥Bluetooths & USB 2-in-1 connect🔥Android 10.0 OS🔥2.0Ghz 4 core high efficiency processor 4GB RAM+64GB ROM large storage🔥6300mAh large battery, more stable and longer lasting diagnostics🔥VAG Guided🔥ECU Code🔥Bi-directional Control🔥35+ Resets🔥CANFD&DOIP🔥FCA AutoAuth🔥Full System Diagnostics🔥2 Yrs Update🔥Newly add BST360 battery tester & I-TPMS & VSP600 endoscope🔥23+ Languages. Provide an unparalleled diagnostic experience at an affordable price.
- 🚗【CAN FD & DOIP & FCA, SUPER PROTOCOL】LAUNCH X431 CRP919EBT is equipped with the DBSCAR VII Bluetooth connector supporting CANFD and DoIP. The CRP919EBT automotive diagnostic scanner supports CAN FD protocol (compatible with post-2020 GM vehicles). It also meets DoIP protocol requirements (adapter sold separately) for compatibility with BMW (E & F chassis) models from 2017 onward. Autoauth for FCA SGW supports FCA vehicles including Chrysler models from 2017 and later.
- ✔️【ADVANCED ECU CODE, ADAPTATION, CALIBRATION & INITIALIZATION】The LAUNCH X431 CRP919EBT automotive scanner delivers exceptional ECU code capabilities for customized vehicle setups. It provides dealer-level functionality to streamline maintenance and repairs, enabling ECU matching and learning for enhanced customization.
- 👍【BIDIRECTIONAL CONTROL, 4000+ ACTIVE TESTS】LAUNCH OBD2 scanner CRP919EBT features bi-directional control - the most demanded capability among mechanics. When headlights or windows malfunction, repairs can be costly. With CRP919EBT, execute ECU commands and assess repair status through systems including ABS, windows, valves, wipers, and headlights - streamlining diagnostics while slashing repair expenses.
- 🥇【35+ MOST POPULAR RESET SERVICE FOR 160 MAKES】Same as Snap-on scanners, CRP919EBT scan tool delivers 35+ reset functions for 160+ vehicle models, including: service oil reset, throttle adaptation, steering angle calibration, brake pad replacement code, tire pressure reset, ABS bleeding, battery registration, gear signal learning, and injector code, etc.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.