Classification:

Reference:

EL19-073

Date:

NTB19-119

December 18, 2019

VOLUNTARY SERVICE CAMPAIGN
2019 LEAF; POWER DELIVERY MODULE
CAMPAIGN ID #:
APPLIED VEHICLES:

P9351
2019 LEAF (ZE1)

Check Service COMM or Dealer Business Systems (DBS)
National Service History to confirm campaign eligibility.

INTRODUCTION
Nissan is conducting this voluntary service campaign on certain specific model year 2019
LEAF vehicles to replace the power delivery module (PDM). This service will be performed
at no charge to the customer for parts or labor.

IDENTIFICATION NUMBER
Nissan has assigned identification number P9351 to this campaign. This number must
appear on all communication and documentation of any nature dealing with this campaign.

DEALER RESPONSIBILITY
Dealers are to repair vehicles falling within range of this campaign that enter the service
department. This includes vehicles purchased from private parties, vehicles presented by
transient (tourists) owners, and vehicles in a dealer’s inventory.

Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.

1/3

SERVICE PROCEDURE

Electric vehicles contain a high voltage battery. There is the risk of electric shock, electric
leakage, or similar accidents if the high voltage component and vehicle are handled
incorrectly. Be sure to follow the correct work procedures when performing inspection and
maintenance. Touching high voltage components without wearing appropriate Personal
Protective Equipment (PPE) will cause electrocution.

To avoid the risk of death or severe personal injury:







1.

Be sure to remove the service plug in order to disconnect the high voltage circuits
before performing inspection or maintenance of high voltage system harnesses and
parts.
The removed service plug must always be carried in a pocket of the responsible
worker or placed in the tool box during the procedure to prevent the plug from being
connected by mistake.
Be sure to wear insulating protective equipment consisting of glove, shoes, face
shield and glasses before beginning work on the high voltage system.
Do not allow workers other than the responsible person to touch the vehicle
containing high voltage parts. To keep others from touching the high voltage parts,
these parts must be covered with an insulating sheet except when using them.

Do not bring the vehicle into the READY status with the service plug removed unless
otherwise instructed in the Electronic Service Manual (ESM). A malfunction may
occur if this is not observed.

Replace the PDM.
 Refer to the ESM for the PDM replacement procedure: INSPECTION,
REMOVAL, AND INSTALLATION > ELECTRIC POWER TRAIN > VEHICLE
CHARGING SYSTEM > REMOVAL AND INSTALLATION > PDM (POWER
DELIVERY MODULE) > Removal & Installation / Disassembly and
Assembly.

2/3

NTB19-119

PARTS INFORMATION

(1)

DESCRIPTION

PART NUMBER

QUANTITY

BOX ASSY-POWER CONVERTER (PDM)

B9BC0-5SA1B

1

COVER-POWER DELIVERY MODULE

291X2-4NR0A

1

SEAL-POWER HEAD INVERTER

XBGA1-3NF0A

1

PACKING-DRAIN COCK

21441-5V000

1

SEAL-HOOD

66832-3NF0A

1

LABEL

993B2-3NA0B

1

BLUE EXTENDED LIFE
ANTIFREEZE/COOLANT

999MP-L25500P (1)

1

Three Bond 1217H

999MP-1217HP (1)

1

Order this item through the Nissan Maintenance Advantage program: Phone 877-NISNMA1 (877-647-6621). Website order via link on the dealer portal; www.NNAnet.com
and click on the “Maintenance Advantage-Tire/Battery/Chemical” link.

CLAIMS INFORMATION
Submit a “CM” line claim using the following claims coding:
CAMPAIGN (“CM”) ID

DESCRIPTION

OP CODE

FRT

P9351

Replace PDM

P93510

6.2 Hrs

AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
December 18, 2019

NTB19-119

DESCRIPTION
Original bulletin published

3/3

NTB19-119