NHTSA ID Number: 10168940
Manufacturer Communication Number: JTB00685NAS3
TSB/Document Date: 2019-12-07
Summary
A vibration can be felt in the passenger compartment when starting the engine or when stationary with the engine at idle.
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
JTB00685NAS3
TECHNICAL BULLETIN
01 NOV 2019
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Jaguar service facility to determine
whether this bulletin applies to a specific vehicle.
INFORMATION
This reissue replaces all previous versions. Please destroy all previous versions.
This bulletin supersedes TSB JTB00685NAS2/2019 dated 30 MAY 2019, which should either
be destroyed or clearly marked to show it is no longer valid (e.g. with a line across the page).
Only refer to the electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in blue
SECTION:
303-01
SUBJECT/CONCERN:
Vibration Felt In Passenger Compartment When Starting and/or Idling Engine
AFFECTED VEHICLE RANGE:
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
APPLICABILITY:
1/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
MODEL
YEAR:
MODEL:
F-PACE
(X761)
2018
Onwards
VIN:
093634
Onwards
ASSEMBLY
PLANT:
Solihull
APPLICABILITY:
INGENIUM I4 2.0L Petrol/INGENIUM I4
2.0L Diesel
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
A vibration can be felt in the passenger compartment when starting the engine or when
stationary with the engine at idle.
CAUSE:
The active engine mounts are subject to premature wear. A new service part is now
available.
ACTION:
Follow the instructions below.
PARTS:
NOTES:
An Electronic Product Quality Report (EPQR) must be submitted, including a clear
photograph of the original damaged/leaking active engine mounts installed in the
vehicle, for new active engine mounts (part numbers T4A37103 and T4A37104) to
be released. See the service information section for an example photograph.
Part numbers JDE40145 and JDE40147 may be re-used for installation if they show
no signs of damage or wear.
PART NUMBER
DESCRIPTION
QUANTITY
T4A37103
Active engine mount - Left side
1
T4A37104
Active engine mount - Right side
1
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
2/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
PART NUMBER
DESCRIPTION
QUANTITY
JDE38416
Exhaust manifold gasket - High Pressure (HP)
turbocharger
1
JDE36455
Exhaust manifold spacers and bolts - HP
turbocharger
8
C2Z31824
Exhaust Gas Recirculation (EGR) pipe gasket - HP
turbocharger
1
JDE40147
Turbocharger gasket kit - HP turbocharger
1
JDE36824
Upper oil return O-ring seal - HP turbocharger
1
JDE36825
Lower oil return O-ring seal - HP turbocharger
2
JDE40145
Turbocharger outlet pipe O-ring kit - HP
turbocharger
1
AJ813362
Turbocharger oil feed banjo washers - HP
turbocharger
2
JDE38503
Turbocharger to exhaust manifold gasket - Low
Pressure (LP) turbocharger
1
JDE36824
Upper oil return O-ring seal - LP turbocharger
1
JDE36825
Lower oil return O-ring seal - LP turbocharger
1
AJ813362
Turbocharger oil feed banjo washers - LP
turbocharger
2
T4N15217
EGR cooler O-ring - LP turbocharger
1
T4N15215
EGR cooler gasket - LP turbocharger
1
T2H11760
Catalytic converter turbocharger gasket
1
T2H36778
Catalytic converter turbocharger clamp
1
AJ813345
EGR gasket
1
T2H14088
Diesel Particulate Filter (DPF) to exhaust gasket
1
AJ813342
1
T4N15216
EGR pipe to intake manifold O-ring
1
JDE39873
Thermostat to cylinder block gasket
1
T4A37741
Vacuum pipe attachment - Right side
1
T4A37742
Vacuum pipe attachment - Left side
1
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
3/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Mounting - Set - Renew - Ingenium I4 2.0L
diesel (180PS)
12.45.13
1.8
01
T4A31807
Mounting - Set - Renew - Ingenium I4 2.0L
petrol
12.45.13
1
01
T4A31807
12.45.89.01
0.1
01
T4A31807
DESCRIPTION
Active engine mount vacuum hose Modification
NOTE:
Normal Warranty procedures apply.
SERVICE INFORMATION:
NOTE:
An EPQR must be submitted, including a clear photograph of the original
damaged/leaking active engine mounts installed in the vehicle, for new active engine
mounts (part numbers T4A37103 and T4A37104) to be released.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
4/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
1.
For the release of the new active engine mounts, the parts team will require a
photograph of the damaged/leaking active engine mount(s). Make sure a clear
photograph is taken, with the active engine mount still installed to the vehicle, as
shown in the illustration.
2.
Example of an excessively worn and/or leaking active engine mount.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
5/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
3.
Example of an excessively worn and/or leaking active engine mount.
SERVICE INSTRUCTION:
NOTES:
Some components may be shown removed to provide extra clarity.
Some variation in the illustrations may occur, but the essential information is always
correct.
1.
Remove the undershield, (see TOPIx workshop manual section 501-02: Removal and
Installation - Engine Undershield).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
6/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
2.
NOTE:
Repeat this step for the opposite side.
Inspect the active engine mounts for signs of excessive wear and/or leaking fluid.
If both active engine mounts show no signs of excessive wear
and/or leaking fluid, do not continue with this technical bulletin,
as the content of this technical bulletin does not directly relate to
the customers concern. Continue to diagnose the vehicle using the
TOPIx workshop manual, (see TOPIx workshop manual section 30300: Diagnosis and Testing - Engine).
If any of the active engine mounts show any signs of excessive
wear and/or leaking fluid, continue to step 3.
3.
Renew both active engine mounts, (see TOPIx workshop manual section 303-01:
Removal and Installation - Left/Right Engine mount).
Do not install the air deflector during this step.
Do not install the active engine mount vacuum hose to the active
engine mounts during this step.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
7/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
4.
Disconnect the active engine mount vacuum hose from the fasteners.
5.
Disconnect the active engine mount vacuum hose from the fasteners.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
8/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
6.
Disconnect the active engine mount vacuum hose from the fasteners.
7.
NOTE:
Do not pull on the active engine mount vacuum hose.
1 - Disconnect the active engine mount vacuum hose from the fasteners.
2 - Allow the active engine mount vacuum hose to reposition
downward.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
9/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
8.
Separate the active engine mount vacuum hose at the connector shown in the
illustration.
Remove the active engine mount vacuum hose from the vehicle.
9.
The illustration shows the active engine mount vacuum hose removed from the
vehicle.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
10/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
10.
Remove and discard the section of active engine mount vacuum hose.
11.
Install the section of active engine mount vacuum hose, as shown in the illustration.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
11/13
11/1/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
12.
Remove and discard the section of active engine mount vacuum hose.
13.
Install the section of active engine mount vacuum hose, as shown in the illustration.
14.
Reverse steps 4 to 8.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
12/13
11/1/2019
15.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
NOTE:
Repeat this step for the opposite side of the vehicle.
Install the active engine mount vacuum hose to the active engine mount.
16.
Install the undershield, (see TOPIx workshop manual section 501-02: Removal and
Installation - Engine Undershield).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1572592185208
13/13
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: JTB00685NAS3
Replacement Service Bulletin Number:
MFR Communication Date: 2019-11-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- Obd2 Bluetooth Scanner Lifetime Update: Ediag Elite offers revolutionary Advantage Lifetime Updates with unlimited access to the superior 15 reset service, bidirectional testing and full system diagnostics.The Ediag Elite is an excellent Bluetooth obd2 scanner diagnostic tool ideal for diy's and private car owners
- Bidirectional Control for Quickly Locating Problems: The Bidirectional Scan tool allows you to send commands directly from your smartphone to your vehicle for active testing. This feature helps to quickly narrow down problems such as air conditioning clutches, windows, doors, sunroofs, etc., reducing diagnostic time for mechanics and helping Diy users locate faults more easily. In addition, Ediag Elite provides fault analysis and repair guidance to help you solve problems efficiently.
- 15 Maintenance Resets: The current version introduces 15 popular special features: Oil Reset, Headlight Matching, Bleeding Reset, TPMS Reset, BMS Reset, Gear Box Relearn, Throttle Learning, Injector Coding, SAS Reset and more special functions in system diagnose menu. These functions make it easy for owners to carry out the necessary maintenance and servicing, ensuring that your vehicle stays in top condition, prolonging its service life and preventing common problems and breakdowns. Note: The Special function vary by model& year, Reach us check compatibility.
- Wide Compatibility CANFD & FCA
Autoauth: Compatible with GM, Ford, Toyota, Chrysler, Honda, Mazda, Nissan, Mitsubishi, Hyundai, KIA with standard OBD2 port from 1996 to newer. More car brands and features will be released gradually. Newest Ediag Elite scanner supports CANFD Protocol and FCA cars. Note: Coverage may vary on different vehicle by model& year ,Please contact us to confirm compatibility before purchase. - Perfect for Monitoring The Health of Your Vehicle: Ediag Elite is designed to make vehicle maintenance simple and efficient. With intelligent AutoVIN quick recognition, it is easy to connect to your car without the need for manual input. Real-time data is visualized in a variety of formats, including graphs, numeric, meter displays and clear 4-in-1 data charts, allowing you to effortlessly monitor real-time data. Data logging/reporting is available for playback and further analysis.
- No Annual Fees & 2026 Upgraded CAN FD: Why pay $199/year or more for updates? The 2026 newest Kingbolen K7 obd2 scanner features have been upgraded to Lifetime Updates without subscription fees, saving you significant costs in the long run. K7 scan tool also adds the CAN FD protocol for the latest GM models (2019+), enabling faster data transfer, reducing the risk of undetected errors
- 2026 Newest Top-tier Car Scanner: Kingbolen K7 diagnostic scan tool is equipped with most capabilities for daily repair/maintenance: Wireless diagnosis via Bluetooth, Bidirectional Test, ECU Online/Offline Code, 31+ Resets, PMI for Ford, Lincoln, Mazda, Global version for 100+ brand vehicles and 17 languages, no area limit, FCA AutoAuth
- OE-Level Full Systems Scan Tool: K7 professional diagnostic scanner with Auto Vin can do one-click to scan ECUs on most of vehicles, like pcm, ecm, eps, bcm, tpms, sas, a/c system... to read/clear code, view live data, freeze frame, read ecu info. 4-in-1 data stream graphics can make data viewing more intuitive. Detailed diagnostic reports will help you easily master the car situation as it can be shared by bluetooth or email! Adding workshop information can help your customers to know more
- Bidirectional Test/Active Test & ECU Code: Stop guessing and start fixing. Bidirectional scan tool Kingbolen K7 can perform real active test that can send commands to the vehicle's ECU to drive the actuators to work, like window, rear mirrors, sunroof, door, solenoids, wipers, headlamp, etc, helping you quickly find out bad parts and pinpoint faulty issues. K7 bidirectional scanner will be a good choice to save money and time on car repairs when performing complex maintenance and repair
- 31 Reset Functions: Avoid expensive dealership visits for simple services. Experience tells us that just a small repair service may cost a lot of money. Kingbolen K7 is a professional diagnostic scanner with 31 common maintenance services like Oil /SAS/EPB/TPMS Reset, Battery Matching, ABS Bleeding, Injector Code, etc. It effectively handles most of the car reset and relearning jobs, perfect for experienced DIYers and mechanics. Note: Functions in the menu vary across vehicles. Kindly check the compatibility before purchase
- 【Lifetime Database & Software Updates— No Subscription Fee, No Feature Lock, Save you $399/Y】KINGBOLEN K8 Pro's software can already be permanently upgraded and used for while software of other same price product still needs annual fee of almost $400. K8 pro scanner has packed all capabilities auto technicians would ever need for repair & maintenance services: Added CAN-FD & DOIP protocol, Bluetooth Wireless Diagnosis, Bidirectional Test, ECU Online/Offline Code & Guided Functions for VW, for Audi...34+ Restes, Autoauth for FCA SGW, Larger 4GB+64GB memory, 12600mAh battery, 8'' touch screen with 1280 * 800 Resolution. A Kickstand can allow the tablet to sit at a comfortable angle
- 【Newly Added CAN FD & DOIP Protocol】As Upgrade Version of Kingbolen K8, K8 Pro obd2 scanner supports CANFD and DOIP protocol, which will save you 200+ bucks as no need extra buy for special adapter. CANFD protocol suits for the latest GM(2019-), reducing the risk of undetected errors. The DoIP protocol (comes with DoIp cable) fits for 2017+ BMW(F&G chassis), for Jaguar & Land Rover after 2017, for Volvo after 2018. Plus, K8 Pro's Memory from 2G+32G expanded to 4G+64G, update period extended from 2 years to permanent
- 【34+ Hot Special Functions & V.A.G Guide】KINGBOLEN K8 pro bluetooth obd2 scanner covers almost all common services including Oil Reset, EPB, SAS, BMS Reset, ABS bleed, Throttle Reset, Suspension, Injector Code, Power Balance, Transmission Adaptation, Fuel Trim Learn, HVAC Control Module Calibrate, Language Change, A/F Settings, Stop/Start Reset, Crankshaft Sensor Relearn, TPMS, PMI function and etc. Imagine how much money and time you spend on car maintenance every year? K8 pro car scanner will be a good helper and saver for your car. V.A.G Guided function provides step-by-step guide to work for Volkswagen/Audi/Skoda. Note: Please send us model/year/vin to check compatibility before order
- 【Powerful Bidirectional Test/Active Test & ECU Code】As a bidirectional scan tool, KINGBOLEN K8 pro allows you to request information from a vehicle's ECU or send commands to the vehicle's modules to perform specific tests and functions, such as EVAP Tests, Turn on/off radiator fan, Window/Mirror/Door Lock Test, Pump and Value Tests, Sound horn Test, et. Without using the vehicle control system and dismantling car’s parts, it can quickly and accurately pinpoint the fault causes, simple operation saves time and money
- 【Wireless OE-Level All Systems Diagnostics】Equipped with Bluetooth VCI, you can do car diagnostics out of the car (up to 33F/10M) without being confined to a small space inside the car. Provides the convenience of Auto VIN, K8 pro allowing for easy access and diagnosis of all available modules on a wide range of vehicles, like PCM, ECM, BCM, TPMS, SAS, Fuel System, etc, to perform read/clear codes, view live data, freeze frame, perform active tests, and read ECU info... 12-In-1 Data Stream Graphics make data viewing more intuitive.Diagnostic reports can be shared via QR Code, Bluetooth or email.Built-in Browser and Fault Code Library allows you directly query the fault code when diagnosing
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.