Stabilizer Bar Nut (Escape)

W716075S442

Package Contains 4
Pieces, 2 Pieces
Required

Wheel Knuckle Strut Bolt (Escape)

DS7Z-6584-B

-

6M5Z6B752-A

-

BM5Z-8527-A

-

6
1

1

Valve Cover Gasket (Escape)
Oil Separator Gasket
Oil Separator O-Ring

1
1
1

7N5Z-00812-A

Package Contains 1
Rear Subframe Mounting Bolts (Escape)
Piece, 2 Pieces Required

2

8V4Z-5D035-A

Package Contains 1
Front Subframe Mounting Blots (Escape)
Piece, 2 Pieces Required

2

W714753S442

Package Contains 4
Pieces, 4 Pieces
Required

Brake Caliper Bolts (Escape)

1

W520202S437

Package Contains 4
Pieces, 2 Pieces
Required

Coolant Outline Fastener

CCPZ3B477-C

-

F1EZ-8620-A

-

1

Wheel Hub Nut (Escape AWD Only)

1

Stretchy Belt

1

W716075S442

Package Contains 4
Lower Ball Joint Bolt (Escape AWD Only)
Pieces, 1 Piece Required

1

W520415S442

Package Contains 4
Lower Ball Joint Nut (Escape AWD Only)
Pieces, 1 Piece Required

1

W718250S439

Package Contains 5
Pieces, 5 Pieces
Required

YS4Z-3N324AA

-

W520102S442

Package Contains 4
Pieces, 2 Pieces
Required

CN1Z7H424-B

-

CV6Z-7086-A

-

1
Upper/Lower PTU Bolts (Escape AWD Only)
Halfshaft Bearing Retaining Strap (Escape AWD
Only)
Halfshaft Bearing Retaining Nuts (Escape AWD
Only)
Intermediate Shaft Seal (Escape AWD Only)
PTU Compression Seal (Escape AWD Only)

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2139/US/...

1
1

1
1

12/3/2019

Page 5 of 7

W717236S300

Package Contains 4
Cylinder Head Fuel Drive O-ring Seal (Escape
Pieces, 1 Piece Required and Fusion)

1

XO-5W20Q1SP

-

Motorcraft® SAE 5W-20 Synthetic Blend Motor
Oil (All Markets Except Canada)

As
Required

CXO-5W20LSP6

-

Motorcraft® SAE 5W-20 Super Premium Motor
Oil (Canada Only)

As
Required

TA-26

-

Motorcraft® Threadlock 262

As
Required

ZC-30-A

-

Motorcraft® Silicone Gasket Remover

As
Required

CU7Z19B508-A

-

Flange Sealant

As
Required

ZC-31-B

-

Motorcraft® Metal Surface Prep Wipes

As
Required

TA-30

-

Motorcraft® Silicone Gasket and Sealant

As
Required

VC-3-B

-

Motorcraft® Orange Concentrated
As
Antifreeze/Coolant, 1 Gallon (All Markets Except Required
Canada)

CVC-3-B2

-

Motorcraft® Orange Concentrated
Antifreeze/Coolant, 1 Gallon (Canada Only)

As
Required

Parts To Inspect And Replace Only If Necessary
BE8Z-6268-C

-

DS7Z-9439-A

-

DS7Z-9L438-A

-

DS7Z9P867-A

-

HYFS-094YEC

-

F2GZ63600A58-A

-

DS7Z9E936-A

-

8W9Z6C287-A

-

DS7Z6B856-A

-

BE8Z-9278-A

-

DS7Z-12029-B

-

XS6E-6626AA

-

Timing Belt

As
Needed

Intake Manifold Gasket

As
Needed

Intercooler Gasket

As
Needed

Intercooler Seal

As
Needed

Spark Plugs

As
Needed

Intermediate Shaft Bushing (Escape AWD Only)

As
Needed

Throttle Body Gasket

As
Needed

High Pressure Fuel Pump Tappet

As
Needed

Oil Cooler Assembly

As
Needed

Oil Pressure Switch

As
Needed

Ignition Coil-On-Plug

As
Needed

Oil Pickup Tube O-ring Seal

As
Needed

Cylinder Block Dowels

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2139/US/...

12/3/2019

Page 6 of 7

W701183S300

Package Contains 4
Pieces

W701350S437

Package Contains 4
Pieces

DS7Z-9346-B

-

BM5Z6L092-C

-

As
Needed
Cylinder Block Pins

As
Needed

Bracket

As
Needed

Crankcase Vent Oil Drain Tube

As
Needed

Warranty Status: Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty
Coverage. Warranty/ESP coverage limits/policies are not altered by a TSB. Warranty/ESP coverage limits
are determined by the identified causal part and verified using the OASIS part coverage tool. For repairs
covered by the New Vehicle Limited Warranty, completion of the procedure outlined in this TSB does not
require obtaining Prior Approval or completion of a Cost Cap.
Labor Times
Operation
No.

Description

Time

2017-2019 Escape Front Wheel Drive (FWD) 1.5L: Retrieve DTCs, Diagnose
And Replace The Short Block (Do Not Use With Any Other Labor Operations)

DR192139A

19.7
Hrs.

2017-2019 Escape All Wheel Drive (AWD) 1.5L: Retrieve DTCs, Diagnose And
Replace The Short Block (Do Not Use With Any Other Labor Operations)

DR192139B

21.2
Hrs.

2014-2019 Fusion 1.5L: Retrieve DTCs, Diagnose And Replace The Short Block
(Can Be Claimed With Labor Operation D Or E)

DR192139C

19.2
Hrs.

2014-2019 Fusion, 2017-2019 Escape Without Lane Departure: Additional Time
To Check And Correct Front Toe (Can be Claimed With Labor Operations A-C)

DR192139D

0.6
Hrs.

2014-2019 Fusion With Lane Departure: Additional Time To Check And Correct
Front Toe (Can be Claimed With Labor Operation C Only)

DR192139E

0.8
Hrs.

Repair/Claim Coding
Causal Part:

6009

Condition Code: D8

Service Procedure
For repairs covered by the New Vehicle Limited Warranty, completion of the procedure outlined in
this TSB does not require obtaining Prior Approval or completion of a Cost Cap.
NOTE: Part availability for this TSB is initially limited and Dealers may experience temporary
backorders that will be filled as quickly as possible. Dealers are requested to order parts only
when required to complete a customer vehicle repair.
1. With the engine at normal operating temperature, pressurize the cooling system to 138 kPa (20 psi) and
hold for 5 hours. Refer to the Cooling System Pressure Test in Workshop Manual (WSM), Section 30303, Diagnosis and Testing.
2. Did coolant system pressure drop more than 27.57 kPa (4 psi) after 5 hours?
(1). Yes - proceed to Step 3.
(2). No - this article does not apply. Refer to Powertrain Control/Emission Diagnosis (PC/ED) Manual
for normal diagnostics.
3. Remove the spark plugs. Refer to WSM, Section 303-07.

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2139/US/...

12/3/2019

Page 7 of 7

4. Inspect for coolant in the cylinders due to an erosion, corrosion, pitting and flatness of the engine block
surface. Is coolant present in any cylinders?
(1). Yes - remove the engine and replace the engine short block. Refer to WSM, Section 303-01.
• NOTE: For AWD Escape only, it is necessary to remove the power transfer unit (PTU) for
engine removal and installation. Refer to WSM, Section 308-07B.
• NOTE: Advise the customer that some odor may be present after the repair has been

completed until the residual coolant dissipates from the exhaust.
(2). No - this article does not apply. Refer to WSM, Section 303-01 for normal diagnostics.

© 2019 Ford Motor Company
All rights reserved.
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge,
tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do
not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the
Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended
Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was
current at the time of printing. Ford Motor Company reserves the right to supersede this information with updates. The most recent
information is available through Ford Motor Company's on-line technical resources.

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2139/US/...

12/3/2019