NHTSA ID Number: 10167310
Manufacturer Communication Number: JTB00677NAS2
TSB/Document Date: 2019-11-07
Summary
An oil leak from underneath the vehicle may be evident. Upon further inspection, the leak may be found to be from the transmission.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
- MaxLife Technology prevents engine breakdown with 40% better...
- Includes seal conditioners to reduce oil consumption and oil...
- Added detergents reduce sludge, corrosion, rust and deposits...
- Advanced friction-fighting additives help maximize...
- Meets or exceeds all requirements of ILSAC GF-6A, API SP...
This product presentation was made with AAWP plugin.
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: JTB00677NAS2
Replacement Service Bulletin Number:
MFR Communication Date: 2019-10-11
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
JTB00677NAS2
TECHNICAL BULLETIN
11 OCT 2019
© Jaguar
Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional
Technicians with the knowledge, tools, and equipment required to do the job properly and
safely. It informs these Technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not
be performed by 'do-it-yourselfers'. If you are not a Retailer, do not assume that a condition
described affects your vehicle. Contact an authorized Jaguar service facility to determine
whether this bulletin applies to a specific vehicle.
INFORMATION
This reissue replaces all previous versions. Please destroy all previous versions.
This bulletin supersedes TSB JTB00677NAS1/2019 dated 04 MAR 2019, which should either
be destroyed or clearly marked to show it is no longer valid (e.g. with a line across the page).
Only refer to the electronic version of this Technical Bulletin in TOPIx.
Changes are highlighted in blue
SECTION:
307-01A
SUBJECT/CONCERN:
Oil Leak From Transmission
AFFECTED VEHICLE RANGE:
MODEL:
MODEL
YEAR:
VIN:
ASSEMBLY
PLANT:
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
APPLICABILITY:
1/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
MODEL:
MODEL
YEAR:
F-PACE
(X761)
20172019
045122329092
Solihull
INGENIUM I4 2.0L Petrol/GTDi 2.0L Petrol/INGENIUM I4
2.0L Diesel, Vehicles With: 8HP45 8-Speed Automatic
Transmission RWD
F-TYPE
(X152)
20182019
K48252K58803
Castle
Bromwich
INGENIUM I4 2.0L Petrol, Vehicles With: 8HP45 8-Speed
Automatic Transmission RWD
XE
(X760)
2017
917833979442
Solihull
GTDi 2.0L Petrol/INGENIUM I4 2.0L Diesel, Vehicles
With: 8HP45 8-Speed Automatic Transmission RWD
XE
(X760)
20172019
P00002P42562
Castle
Bromwich
INGENIUM I4 2.0L Petrol/INGENIUM I4 2.0L Diesel,
Vehicles With: 8HP45 8-Speed Automatic Transmission
RWD
XF
(X260)
20162018
Y11895Y73262
Castle
Bromwich
INGENIUM I4 2.0L Petrol/GTDi 2.0L Petrol/INGENIUM I4
2.0L Diesel, Vehicles With: 8HP45 8-Speed Automatic
Transmission RWD
VIN:
ASSEMBLY
PLANT:
APPLICABILITY:
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
An oil leak from underneath the vehicle may be evident. Upon further inspection, the leak
may be found to be from the transmission.
CAUSE:
Manufacturing concern.
ACTION:
Follow the instructions below.
PARTS:
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
2/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
NOTES:
An allowance of $18.20 USD or local equivalent has been provided to cover the
cost of the Loctite 542, 1 pack of 10 M10 grub screws, and 1 liter of transmission oil.
Claim using Sundry Code ‘ZZZ001’.
The allowance for M10 grub screws may only be claimed 1 time per 10 vehicles.
PART NUMBER
DESCRIPTION
QUANTITY
ZZZ001*
Loctite 542 or equivalent
$2.60
T2H30418
M8 Grub screw
1
ZZZ001
M10 x 16 mm - Pitch 1.5 mm - Steel - Hex socket Grub screw
$2.60
ZZZ001
1 liter Transmission oil
$13.00
WARRANTY:
NOTES:
Repair procedures are under constant review, and therefore times are subject to
change; those quoted here must be taken as guidance only. Use TOPIx to obtain
the latest repair time.
The JLR claims submission system requires the use of causal part numbers. Labor
only claims must show the causal part number with a quantity of zero.
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Grub screw - Install - Single/pair - FPACE
44.91.47
0.4
42
C2D19741
Transmission oil - Check and top up - FPACE
44.24.06
1.0
42
C2D19741
Grub screw - Install - Single/pair - FTYPE
44.91.47
0.2
42
C2D19741
Transmission oil - Check and top up - FTYPE
44.24.06
0.5
42
C2D19741
Grub screw - Install - Single/pair - XE, XF
44.91.47
0.3
42
C2D19741
DESCRIPTION
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
3/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
44.24.06
0.7
42
C2D19741
DESCRIPTION
Transmission oil - Check and top up XE, XF
NOTE:
Normal Warranty procedures apply.
SERVICE INSTRUCTION:
NOTE:
Some steps in this service instruction may not be applicable to certain vehicle
variants due to transmissions mountings being installed in the areas shown.
1.
Remove the engine undershield (see TOPIx Workshop Manual section 501-02: Front
End Body Panels - Removal and Installation - Engine Undershield).
2.
Confirm the source of the transmission oil leak (see TOPIx Workshop Manual section
307-01A: Automatic Transmission/Transaxle-RWD - Diagnosis and Testing).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
4/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
3.
Identify the root cause of the transmission oil leak.
If the transmission oil leak is from the area shown, continue to step
4.
If the transmission oil leak is not from the area shown, continue to
step 5.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
5/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
4.
NOTE:
Make sure the area is clean and free from foreign material.
Apply Loctite 542 or equivalent to the new grub screw and install the new grub
screw.
The grub screw must be installed flush with the surface of the
transmission casing.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
6/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
5.
Identify the root cause of the transmission oil leak.
If the transmission oil leak is from the area shown, continue to step
6.
If the transmission oil leak is not from the area shown, continue to
step 7.
If the transmission oil leak is not from the area shown and there was
no transmission oil leak found in step 3, submit a Technical
Assistance (TA) request with all supporting evidence attached.
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
7/8
10/11/2019
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
6.
NOTE:
Make sure the area is clean and free from foreign material.
Apply Loctite 542 or equivalent to the new grub screw and install the new grub
screw.
The grub screw must be installed flush with the surface of the
transmission casing.
7.
NOTE:
The Loctitie should be allowed to cure for 4 hours before the oil level check
procedure is completed.
Check the transmission oil level and fill as required (see TOPIx Workshop Manual
section 307-01: General Procedures - Transmission Fluid Level Check).
8.
Install the engine undershield (see TOPIx Workshop Manual section 501-02: Front
End Body Panels - Removal and Installation - Engine Undershield).
https://www.odyssey.jlrint.com/odyssey/WorkflowHtmlComposition.do?wid=1570194977613
8/8
- 💝【Questions? We’re Here Anytime】MK808S is a high-end flagship model that connects via wired OBD2 for faster, more stable, and reliable diagnosis compared to B,.T tools. If you have any questions about setup, activation, features, additional accessories, or update subscriptions, please reach us and we will respond promptly to assist you. It includes 1-Year F.ree Updates (124.5 bucks/year after), and most functions still work after expiration except a few online features. Please note some functions like full TPMS are not supported, reach us for model recommendations.
- 🔥🔥🔥【2026 NEWLY RELEASED BI-DIRECTIONAL CONTROL】As the 2026 upgraded version of MaxiChek MX808 MaxiDiag MD909 Pro MD906 Pro, our Newest MK808S auto diagnostic scanner for all cars inherits the powerful Bi-directional Control which makes it the most cost-effective scanner (without breaking the bank, same as MK900BT MS906 PRO MS906MAX). Active test is widely used on car subsystems to help you check if the car actuators are all in good condition. Such as windows, rear mirrors, sunroof, wipers...
- 【28+ MOST POPULAR RESET SERVICE FOR 150 MAKES】Autel versatile OBDII scanenr MK808S, full level-up of MX808, work as MX900, MK900, MK900-BT, supports 150+ car brands worldwide. Like the OBD2 code reader MaxiCOM MK808BT Pro, MK808S is equipped with 28+ hot services including 0il Reset, SAS Calibration, ABS Bleeding, Battery Registration, etc. MK808S ranks top in professional automotive tablets and keeps updating to support more newer modes from 2025 to 2026.
- 【ALL SYSTEM DIAGNOSTICS, FACTORY-LEVEL SCANNER】The MK808S dealer-level scanner, like Snap-on tools, effectively works all cars for all system diagnostics. It reads/clears codes, displays 5-in-1 Live Data, performs active tests, and special functions for all available modules. With a few clicks, you can easily understand the vehicle's condition. The convenient Wi-Fi printing feature allows you to generate a detailed report, highlighting the exact nature of the problem.
- 【AUT0 SCAN & AUT0V1N, 10X FASTER】How much have you spent on car maintenance? Even a minor issue can take up a significant amount of time. The MK808S is designed to improve your work efficiency. With its Aut0V1N technology, you can check your car's make, model, and year information with just one click. The Aut0Scan feature automatically scans all of the vehicle's modules and detects any fault codes. Check Aut0V1N compatibility by reaching us at 📞1-833-436-5880. Available Mon-Fri, 9 AM-6 PM EST.
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If you encounter Blueto-oth adapter VCI150 malfunction, please tell us 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
This product presentation was made with AAWP plugin.
Last update on 2026-05-12 / Affiliate links / Images from Amazon Product Advertising API