Service Campaign T3G Dealer Best Practice
Date: October 28, 2019
Attn: Dealer Principal/General Manager/Service Manager/Parts Manager
Subject: Service Campaign T3G: THETA GDI ENGINE DTC P1326 - WIRING INSPECTION /INSTALLATION AND ENGINE
INSPECTION / REPLACEMENT (TSB #19-01-006H-4 supersedes TSB #19-01-006H-3)
Updates To This Document
•

Date

Update: References updated TSB #19-01-006H-4 and add 19MY Sonata, Santa Fe,Tucson, and Veloster N
vehicles.
•

10/28/19

Please Note: For 11-18MY vehicles, submit claims on Campaign Claim Entry Screen. For 19MY
vehicles, submit claim on Warranty Claim Entry Screen.

***IMPORTANT Dealer Stock and Retail Vehicles ***

Dealers must perform Service Campaign T3G on all vehicles that return with DTC P132600.

Affected Vehicles

Hyundai has launched a Service Campaign for applicable vehicles with 2.0L Turbo and 2.4L GDI engines that may experience the Check
Engine warning lamp illuminated with DTC P132600.
The affected vehicles include:
• Certain 2011-2014 MY Sonata (YF) vehicles with 2.0L Turbo and 2.4L engines
• Certain 2015-2019 MY Sonata (LF) vehicles with 2.0L Turbo and 2.4L engines
• Certain 2013-2018 MY Santa Fe Sport (AN) vehicles with 2.0L Turbo and 2.4L engines
• Certain 2019 MY Santa Fe (TM) vehicles with 2.0L Turbo and 2.4L engines
• Certain 2014-2015 MY Tucson (LM) vehicles with 2.4L engines
• Certain 2018-2019 MY Tucson (TL) vehicles with 2.4L engines
• Certain 2019 MY Veloster N vehicles with 2.0L Turbo engines
Hyundai is initiating this action to ensure the quality of its vehicles and the continued satisfaction of Hyundai customers.

Description

Applicable vehicles with 2.0L Turbo and 2.4L GDI engines may experience the Check Engine warning lamp illuminated with DTC
P132600. Follow the procedures on TSB #19-01-006H-4 (supersedes TSB #19-01-006H-3) to inspect the vehicle and install a wire
harness extension and/or replacement engine based on the inspection results.

Service Action
Reservation – Always check the Vehicle Information Screen in WebDCS for open campaigns and recalls, and
advise the customer on time requirements.
• Make sure to check your appointment reservation settings and verify customer information. This will help reduce
unplanned work and speed up the customer check in process.
• Make sure to review Blue Link alerts with DTC P132600 and reach out accordingly.
• Provide customer with transportation options such as SRC or alternative vehicle.
Readiness – Review this announcement and the accompanying FAQs with all Service and Parts staff including
Reservationist/BDC. Also, complete all applicable training, check your reservation capacity settings (you can set separate
capacities for every recall/campaign), confirm email addresses for campaign appointments, and that you have all necessary
tools, campaign parts and shop equipment as needed.
• Make sure to have necessary Special Service Tools to perform campaign (see TSB #19-01-006H-4 for more details).

•
•

This campaign can possibly require additional repairs after initial inspection; make sure to prepare for unplanned work and
maintain sufficient staff to keep vehicles moving through the shop.
Ensure the entire team completes the “Engine Support” training course on HLP.

Reception – Always check the Vehicle Information Screen in WebDCS for open campaigns and recalls, and print a
copy for technicians. Provide SRC or an alternative vehicle, as needed. If a customer has declined the campaign,
note this on the repair order and request the customer’s signature next to the statement.
• It is important to explain to each customer during the reception step of the service process what happens if their vehicle
requires additional repairs after the inspection process.
• Make sure to advise customers of potential vehicle down time and provide alternative transportation such as an SRC or 3rd
party rental.
 All customers that come in with P132600 or “Engine Protection Mode” should be provided an SRC or
alternative 3rd Party Rental. All SRC or Rental claims will be reimbursed regardless of PA’s decision to
cover the engine replacement.
• Do not charge diagnosis for vehicles that previously had campaign 953 performed and return to the dealership in “Engine
Protection Mode” or with DTC P132600.
Repair – Always plug in the GDS before starting the repair. Make sure to complete an MPI on all vehicles and Quality
Control your work.
• Confirm the GDS-M has the latest software update prior to plugging it in to the vehicle.
• This campaign can possibly require additional repairs. Make sure to refer to the most current TSB for all necessary steps
of the repair process and view the Service Procedure Flowchart on page 9 of TSB #19-01-006H-4 (supersedes TSB#
19-01-006H-3).
• PA Engine Approval Process
• After the engine microphone noise test is performed and two consecutive “No Pass” results are uploaded through the
GDS by the technician, the PA engine request will be auto-created and auto-approved.
• If the engine is seized or knocking and the inspection cannot be completed: Submit a PA request for engine
replacement with a photo of the lower oil pan. When approved, replace the engine with service kits. Perform the wiring
inspection after engine replacement.
• Make sure to quality control work after repair is complete and confirm condition is resolved.
• Record the audio station presets (XM,AM,FM, etc) prior to disconnecting the battery.
• Clear DTC P132600 with engine ON. P132600 may reset if not cleared with the Engine ON.
• If an engine replacement is required, PA may request dealers to perform additional steps before approving replacement.
Dealers will be compensated for this additional time and such steps may include connecting the GDS to retrieve additional
information from the vehicle.
• For 2019MY vehicles that require an engine replacement, a reman must be used. If a reman is not available,
make sure to print out a screenshot of parts availability screen showing reman not available and attach when
submitting the claim.
• Follow ECM update added to the service procedure, follow service flow chart found on page 9 of TSB #19-01-006H-4.

•

IMPORTANT NOTE: Claim Submission Process as stated on page 8 of the TSB.
• For 11-18MY vehicles: Submit Claim on Campaign Claim Entry Screen.
• For 19MY vehicles: Submit Claim on Warranty Claim Entry Screen.

Return – Review all completed campaign and repairs to answer any customer questions. Also, schedule the customer’s
next service.
• It’s important to explain to each customer during the return step of the service process that the 953 Engine Improvement
Campaign is still active and they should contact the dealership if any Check Engine Light is illuminated or Engine
Protection Mode is activated.
Reconnect – Follow up for customer satisfaction.

Parts

Order the required parts based on the vehicle inspection results starting on page 2 of TSB #19-01-006H-4.
For 17MY Sonata 2.4L with production date on 5/13/2016 to 5/19/2016, refer to page 8 of TSB#10-01-006H-4 for detailed instructions.

Customer Notification
•

None

Thank you for your prompt attention to this important matter and continued commitment to Hyundai customers.

Hyundai Motor America

Key Contact Information
Contact Information

Dealer Support

Description

Parts

[email protected]
1-800-545-4515

Parts ordering hotline

Techline

1‐800‐325‐6604

Warranty HELPREP Line

1‐877‐446‐2922

Vehicle Technical Support for Hyundai Dealer
Technicians
Warranty Claim questions for Hyundai Dealers

Warranty Prior Approval (PA) Center

1‐844-371-3808

Warranty Prior Approval (PA) Center for Hyundai Dealers

Xtime Technical Support

[email protected]
1‐866‐984‐6355

Assistance with Car Care Scheduling:
• Appointment / Shop Capacity Management /
Campaign Integration / Operation Codes

AutoLoop Technical Support

[email protected]
1-877-850-2010

CDK Technical Support

https://serviceconnect.support.cdk.com/

Assistance with Car Care Scheduling:
• Appointment / Shop Capacity Management /
Campaign Integration / Operation Codes
Assistance with Car Care Scheduling:
• Appointment / Shop Capacity Management /
Campaign Integration / Operation Codes

Customer Support

Contact Information

Description

Hyundai Customer Care Center
(Recall /Campaign Questions)

1‐855‐671‐3059

Customer questions or concerns related to recall or
service campaigns

Hyundai Recall / Campaign
Website
Hyundai Customer Care Center
(General Questions)

www.hyundaiusa.com/recall

Updated information related to the specific recall or
service campaign
Customers general questions, non‐campaign
related

Hyundai Roadside Assistance

1-800-243-7766

1‐800‐633‐5151

Hyundai Roadside Assistance

Key Reference Information
Name
Campaign Central
Car Care Scheduling (Xtime) - Tutorials
Car Care Scheduling (Xtime) - Recall Appointment
Notification

Parts – Campaign Parts Management (CPM)
Procedure

Source
Consolidated repository of recall and service campaign dealer best practices.
Located on the service tab homepage in www.HyundaiDealer.com
www.HyundaiDealer.com > Service > Dealer Resources > Documents Library >
Car Care Scheduling
1. Log into Xtime
2. Under the menu at the top left, select ‘CONFIGURE’
3. Under the dealership tab, click “EMAIL COMMUNICATION”
4. Slide the toggle to “ADVANCED”
5. Populate as many e-mails as desired in the “PARTS DESK EMAIL FIELD”
As applicable; www.HyundaiDealer.com > Parts > Documents Library >
Campaign Parts Management

Service Rental Car (SRC) Program

www.HyundaiDealer.com > Service tab > SRC Fleet Mgmt Software

Technical Service Bulletin (TSB)
Uncompleted Campaign VIN Listing

www.HyundaiDealer.com > Service tab > Hyundai Tech Info
A listing of vehicles is located on WEBDCS> SERVICE tab> select
UNCOMPLETED CAMPAIGN VIN LISTING

– Dealer Stock (New, SRC, CPO, etc.) and Retailed.
Recall Campaign Website
NHTSA Website

www.hyundaiusa.com/recall
www.safercar.gov

Appendix
Previous Updates To This Document
•

Date
10/3/19

Update
•

References updated TSB #19-01-006H-3 and modifies the Service Procedure to update the Engine
ECM.

•

Additional ECM update added to the service procedure, see flowchart found on page 8 for service
procedure flow of TSB #19-01-006H-3.

•

Updated PA Engine Approval Process Procedures in Repair

•

Update: References updated TSB #19-01-006H-2 with added Service Actions and Parts Information

04/22/19

•

Update: References updated TSB #19-01-006H-1 with added Service Actions and Parts Information

04/03/19

•

Verbiage Update: Service Actions (Reception) – additional details provided regarding SRC and 3rd Party
Rentals.

03/13/19

•

Service Campaign T3G Launch

02/15/19