INSTRUCTION TO SERVICE
ITS: 58770
SECTION:

284 Electrical Panels

WRITTEN BY:

Curtis Matthews

SUBJECT:

Cap charger wakeup input wire and install new Vansco program

ITS58770
THIS ITS DOCUMENT SHOULD BE RETAINED AND REFERED TO FOR FUTURE MAINTENANCE UNTIL
THE NEW FLYER PARTS AND/OR SERVICE MANUAL IS UPDATED TO REFLECT WORK DONE AS A
RESULT OF THIS DOCUMENT. ENSURE THAT THIS DOCUMENT IS AVAILABLE FOR PARTS AND
MAINTENANCE STAFF GOING FORWARD.
THIS DOCUMENT AND THE CONTENTS DISCUSSED HEREIN ARE THE CONFIDENTIAL AND
PROPRIETARY INFORMATION OF NEW FLYER INDUSTRIES CANADA ULC AND NEW FLYER OF AMERICA
INC. AND ARE DISCLOSED BY NEW FLYER IN CONFIDENCE. THIS DOCUMENT AND THE CONTENTS
HEREIN ARE NOT TO BE DISCLOSED BY THE INTENDED RECIPIENT WITHOUT THE PRIOR WRITTEN
AUTHORIZATION OF NEW FLYER. ANY UNAUTHOIZED DISCLOSURE, REPRODUCTION OR OTHER
DISTRIBUTION OF THIS DOCUMENT OR INFORMATION IS STRICTLY PROHIBITED AND MAY RESULT IN
ACTION BEING TAKEN AGAINST THE PARTY MAKING THE UNAUTHORIZED DISCLOSURE. THIS
DOCUMENT AND ALL COPIES HEREOF MUST BE RETURNED TO NEW FLYER UPON REQUEST.

PROCEDURE:
1. Turn the main battery disconnect switch to the “OFF” position.
2. Locate VMM Node 4 behind the light panel above the rear exit door of the bus. See
3. Remove wire 53EP13ZW from connector J4 position 11 and cut the terminal from the wire. See figures 1 & 2.
4. Use Sika glue PN: (6377397) and cap wire with cap PN: (8111672).
5. Tie down the remaining harness with a tyrap PN: (5958112).

J4-11

Figure 1: Connector J4 pin 11 on a VMM node 4

Figure 2: Wire to be capped
6. Install new Vansco program that is provided by the RPSM.
7. Remove all the tools and debris.
8. Turn the battery disconnect switch to “ON” position.

_________________________________________________________________________________________________________________
ITS: 58770
Page 2 of 3

LABOUR ESTIMATE
Operation
1

Cap charger wakeup input wire and install new Vansco

Men

Hours

1

0.5

Labour Time
M X HR
0.5

program

PARTS REQUIRED
Qty.
per
Coach
0.01

Units

Item

Part Number

Description

1

6377397

SIKA GLUE

2

8111672

END CAP 0.093BK-16PVC

1

EA

3

5958112

TYRAP – 7.0 BLACK

1

EA

Notes

EA

_________________________________________________________________________________________________________________
ITS: 58770
Page 3 of 3