Can-Am® On-Road RykerTM

WARRANTY

BULLETIN
SAFETY CAMPAIGN
WARNING: All involved customers must be notified, all involved units must be corrected as per instruction herein.

Campaign no.: 2019–0014
2020–0001
October 3, 2019

Subject: Wheel Nut May Crack

No.

2020-1

MODEL YEAR

MODEL

ADMISSIBLE UNITS

2019 - 2020

Ryker®

Go to BOSSWeb/Warranty/Campaign Monitoring to know the
quantity of units in your inventory impacted by this campaign

IMPORTANT
– When a vehicle comes in for service, always type the VIN in Knowledge Center to
check for pending campaigns or alerts.
– When performing any work on a vehicle, it is good practice to connect it to BUDS2
to ensure that all needed updates are done.

PROBLEM

SOLUTION

One or more wheel nuts may crack resulting in
a reduced clamping force. This could eventually
affect the integrity of the wheel assembly and the
vehicle’s behavior. This may increase the risk of a
crash.

Replace all wheel nuts on the vehicle.
The improved nut has a pronounced groove on
one of its edges.

rbg2019-011-004
rbg2019-011-001a

PARTS REQUIRED
Order parts through regular channel.
Your order will be released progressively upon
availability to ensure an even distribution across
the network.
Printed in Canada. (rbg2019-011 en NL/ML)
©2019 Bombardier Recreational Products Inc. and BRP US Inc. All rights reserved.
®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

1/ 5

NOTE: Your order will be processed despite the

message generated by selective release "No Availability Date at the Present Time" on BOSSWeb.
DESCRIPTION

PART NUMBER

QTY

Wheel nut

705402730

3

MANDATORY TOOLS
REQUIRED TOOL
65MM SOCKET
(P/N 529 036 457)
219001998-158

Calibrated torque wrench
ranging up to 350 N•m
(258 lbf•ft).*

4. Remove the RED locking clip.

* Torque wrench calibration must be performed
each year.

CORRECTIVE ACTION
Before performing the procedure, it is strongly
recommended to view the following video.
Wheel Nut Replacement Procedure Help Video (Article #137066)
rbs2019-004-006a

5. Remove and discard the center lock wheel nut.

Removing the Front Wheel Nut
1. Place the vehicle on a level surface.
2. Lift and support the front of the vehicle.

219001998-162

1.
2.
3.
4.
219001998-159

RED locking clip
Center lock wheel nut
Conical washer
Wheel

In the case of damaged parts, the standard warranty guidelines apply.

USE THESE TUBES TO LIFT OR SUPPORT THE FRONT OF THE
VEHICLE

3. Turn the handlebar and lock the wheel hub with
a locking device (such as a long Allen key or a
tempered steel rod).

2/ 5

2020-1

SAFETY CAMPAIGN

Installing Front Wheel Nut
NOTICE The installation instruction and tightening torque values must be strictly adhered
to. Failure to do so can lead to rim damage.

The installation is the reverse of the removal procedure. However, pay attention to the following.
Tighten the center lock wheel nut to specification.
NOTICE Never use impact tools to tighten
wheel nuts.
TIGHTENING TORQUE
Center lock wheel nut

300 N•m ± 15 N•m
(221 lbf•ft ± 11 lbf•ft)

rbs2019-004-008a

Remove locking device from the wheel hub.

WARNING
Failure to install the RED locking clip may
cause the loss of a wheel if the center lock
wheel nut becomes loose.
RED locking clip installation is Mandatory
The folded end must point inside the drive axle.

1

219001998-158

Removing the Rear Wheel Nut
1. Place the vehicle on a level surface.
2. Move the park position lever in the locked position.
3. Remove the RED locking clip.
rbs2019-004-005a

1. Folded end pointing inside the drive axle

NOTICE Never untighten the nut to align the
RED locking clip hole. Tighten the nut to the
nominal value, then tighten further to align the
hole.

rbs2019-004-006a

SAFETY CAMPAIGN

2020-1

3/ 5

Installing the Rear Wheel Nut

4. Loosen the center lock wheel nut.

NOTICE The installation instruction and tightening torque values must be strictly adhered
to. Failure to do so can lead to rim damage.

The installation is the reverse of the removal procedure. However, pay attention to the following.
Tighten the center lock wheel nut to specification.
NOTICE Never use impact tools to tighten
wheel nuts.
TIGHTENING TORQUE
Center lock wheel
nut

219001998-200

1. RED locking clip
2. Center lock wheel nut

300 N•m ± 15 N•m
(221 lbf•ft ± 11 lbf•ft)

WARNING

5. Lift and support the rear of the vehicle.

Failure to install the RED locking clip may
cause the loss of a wheel if the center lock
wheel nut becomes loose.
RED locking clip installation is Mandatory
The folded end must point inside the drive axle.

1

219001998-201

USE THESE LOCATIONS TO LIFT OR SUPPORT THE REAR OF
THE VEHICLE

6. Remove and discard the center lock wheel nut.

rbs2019-004-007a

1. Folded end pointing inside the drive axle

NOTICE Never untighten the nut to align the
RED locking clip hole. Tighten the nut to the
nominal value, then tighten further to align the
hole.

219001998-203

1. Center lock wheel nut
2. Conical washer

In the case of damaged parts, the standard warranty guidelines apply.

4/ 5

2020-1

SAFETY CAMPAIGN

rbs2019-004-008a

WARRANTY
Submit a warranty claim using the following information.
For claiming procedure, refer to the DEALER/DISTRIBUTOR WARRANTY GUIDE.
Product Line

Ryker

Unit Model Year

2019

Campaign/Bulletin/
Description

14 / 2020-1 / Ryker
Wheel Nut

Total Labor time paid

0.3 hour

Product Line

Ryker

Unit Model Year

2020

Campaign/Bulletin/
Description

1 / 2020-1 / Ryker Wheel
Nut

Total Labor time paid

SAFETY CAMPAIGN

0.3 hour

2020-1

5/ 5