NHTSA ID Number: 10165857
Manufacturer Communication Number: SB-30-1282
TSB/Document Date: 2019-10-15
Summary
Set up Guide for Dataloggers
Trigger switch (if this is included on the cover sheet)
5.
Configuration Cover Sheet
6.
GPS and GPRS antenna (if this is included on the cover sheet)
2.
Make sure you have completed section 4 of this Service Bulletin.
3.
Connect the OBD connector to the OBD port on the driver’s side.
Note:
4.
Each Controller Area Network (CAN) connector must be attached to the correct header. This information
can be found in the Configuration Cover Sheet.
Engine CAN – This header is in the passenger’s
footwell (refer to Figure 14).
CAN header connector: N84
CAN H colour:
Brown/ Yellow (N/Y)
Figure 14
5.
Powertrain CAN – This header is in the right side
footwell (refer to Figure 15).
CAN header connector: N83
CAN H colour:
Blue/White (U/W)
Figure 15
6.
Body CAN – This header is in the driver’s footwell
(refer to Figure 16).
CAN header connector: N81
CAN H colour:
Brown/Red (N/R)
Figure 16
16 September, 2019
Page 14 of 23
SERVICE BULLETIN
7.
SB-30-1282
Periphery CAN – This header is in the instrument
panel next to the DRVU (refer to Figure 17).
CAN header connector: N85
CAN H colour:
Red/White (R/W)
Figure 17
8.
HMI CAN – This header is in the instrument panel
next to the DRVU (refer to Figure 18).
CAN header connector: N82
CAN H colour:
Yellow/White (Y/W)
Figure 18
9.
HU CAN – This header is in the instrument panel
next to the DRVU (refer to Figure 19).
CAN header connector: N87
CAN H colour:
Black/White (B/W)
Figure 19
10. FlexRay CAN Breakout – This 22-way connection is
on the passenger’s side (refer to Figure 20).
Use the Breakout Flexray cable to bridge the 22-way
connector. Put the 3-pin plug into the Flexray 3-pin
plug on the EVO cable.
CAN header connector: C38.12 (22-way grey
connector)
CAN H colour:
Green (high) & Pink (low)
Figure 20
11. Connect the 25-way and 15-way connectors to the datalogger.
16 September, 2019
Page 15 of 23
SERVICE BULLETIN
SB-30-1282
12. Connect the 22-way connectors. This will connect the EVO cable to the datalogger.
13. If the Configuration Cover Sheet says a trigger switch is necessary, connect the trigger switch to the rebel interface
cable. Put the switch in a position where you can access it when driving.
14. If the configuration cover sheet says a GPS/GPRS antenna is necessary, connect the GPS/GPRS antenna to the
datalogger. Put the antenna on the dashboard or on the parcel shelf.
15. When the datalogger has recorded events, do section 5 of this Service Bulletin.
16 September, 2019
Page 16 of 23
SERVICE BULLETIN
SB-30-1282
Guide D: CAN (Vantage 19MY)
1.
Make sure you have these items of equipment prepared:
1.
Influx datalogger – with SD card inserted
2.
EVO cable
3.
Rebel interface cable
4.
Trigger switch (if this is included on the cover sheet)
5.
Configuration Cover Sheet
6.
GPS and GPRS antenna (if this is included on the cover sheet)
2.
Make sure you have configured the datalogger (refer to section 4).
3.
Connect the OBD connector to the OBD port on the driver’s side.
Note:
4.
Each Controller Area Network (CAN) connector must be attached to the correct header. This information
can be found in the Configuration Cover Sheet.
EDiff Private CAN – This header is behind the rear
right trim, near the battery (refer to Figure 21).
CAN header connector: N86
CAN H colour:
Purple/White
Figure 21
5.
Powertrain CAN – This header is in the right-side
footwell (refer to Figure 22).
CAN header connector: N83
CAN H colour:
Blue/White (U/W)
Figure 22
16 September, 2019
Page 17 of 23
SERVICE BULLETIN
6.
SB-30-1282
Body CAN – This header is in the driver’s footwell
(refer to Figure 23).
CAN header connector: N81
CAN H colour:
Brown/Red (N/R)
Figure 23
7.
Periphery CAN – This header is in the instrument
panel next to the DRVU (refer to Figure 24).
CAN header connector: N85
CAN H colour:
Red/White (R/W)
Figure 24
8.
HMI CAN – This header is in the instrument panel
next to the DRVU (refer to Figure 25).
CAN header connector: N82
CAN H colour:
Yellow/White (Y/W)
Figure 25
9.
HU CAN – This header is in the instrument panel next
to the DRVU (refer to Figure 26).
CAN header connector: N87
CAN H colour:
Black/White (B/W)
Figure 26
16 September, 2019
Page 18 of 23
SERVICE BULLETIN
SB-30-1282
10. FlexRay CAN Breakout – This 22-way connection is
on the passenger’s side (refer to Figure 27).
Use the Breakout Flexray cable to bridge the 22-way
connector. Connect the 3-pin plug to the Flexray 3pin plug on the AM cable.
CAN header connector: C38.12 (22-way grey
connector)
CAN H colour:
Green (high) & Pink (low)
Figure 27
11. Connect the 25-way and 15-way connectors to the datalogger.
12. Connect the 22-way connectors. This will connect the EVO cable to the datalogger.
13. If the Configuration Cover Sheet says a trigger switch is necessary, connect the trigger switch to the rebel interface
cable. Put the switch in a position where you can access it when driving.
14. If the configuration cover sheet says a GPS/GPRS antenna is necessary, connect the GPS/GPRS antenna to the
datalogger. Put the antenna on the dashboard or on the parcel shelf.
15. When the datalogger has recorded events, do section 5 of this Service Bulletin.
16 September, 2019
Page 19 of 23
SERVICE BULLETIN
SB-30-1282
Guide E: CCP (Rapide, Vanquish, V12 Vantage)
1.
Make sure you have these items of equipment prepared:
1.
Influx datalogger – with SD card inserted
2.
Single OBD cable
3.
Rebel interface cable
4.
Trigger switch (if this is included on the cover sheet)
5.
Resistive link lead
6.
Configuration Cover Sheet
7.
GPS and GPRS antenna (if this is included on the cover sheet)
2.
Make sure you have configured the datalogger (refer to section 4).
3.
Connect the single OBD cable to the OBD port on the passenger’s side.
4.
Connect the 25-way and 15-way connectors to the datalogger.
5.
Connect the 22-way connectors. This will connect the OBD cable to the datalogger. Make sure the resistive link is
connected.
6.
Connect the AMDS kit to the port on the driver’s side and connect to the vehicle using AMDS as usual.
7.
Access “Special Apps” and select “CCP Enable
Disable” (CCP stands for CAN Communication
Protocol) (refer to Figure 28).
Figure 28
16 September, 2019
Page 20 of 23
SERVICE BULLETIN
8.
SB-30-1282
Make sure that “Master” and “Slave” are both
selected (refer to Figure 29). Click “Allow CCP”.
Figure 29
9.
Click “Yes” on the dialog box (refer to Figure 30).
Figure 30
10. Make sure that “CCP Start: Successful” is shown on both ECUs.
Note:
Steps 6 to 9 above must be done again if the ignition is cycled off and on.
To record the initial engine start, put the key in position 2 but do not push it under flush. “Engine Start”
will illuminate red when you put your foot on the brake pedal (or the clutch pedal for a vehicle with
manual transmission).
11. If the Configuration Cover Sheet says a trigger switch is necessary, connect the trigger switch to the rebel interface
cable. Put the switch in a position where you can access it when driving.
12. If the configuration cover sheet says a GPS/GPRS antenna is necessary, connect the GPS/GPRS antenna to the
datalogger. Put the antenna on the dashboard or on the parcel shelf.
13. When the datalogger has recorded events, do section 5 of this Service Bulletin.
16 September, 2019
Page 21 of 23
SERVICE BULLETIN
SB-30-1282
Guide F: CCP (DB11 V12 and DBS Superleggera)
1.
Make sure you have these items of equipment prepared:
1.
Influx datalogger – with SD card inserted
2.
EVO cable
3.
Rebel interface cable
4.
Trigger switch (if this is included on the cover sheet)
5.
Configuration Cover Sheet
6.
GPS and GPRS antenna (if this is included on the cover sheet)
2.
Make sure you have configured the datalogger (refer to section 4).
3.
Connect the EVO cable to the vehicle. The OBD
connector goes to the driver’s side. The Controller
Area Network (CAN) connector goes to the engine
CAN header in the passenger’s footwell (refer to
Figure 31). The name of the correct CAN connector
will be written on the cover sheet.
Figure 31
4.
Connect the 25-way and 15-way connectors to the datalogger.
5.
Connect the 22-way connectors. This will connect the EVO cable to the datalogger.
6.
If the Configuration Cover Sheet says a trigger switch is necessary, connect the trigger switch to the rebel interface
cable. Put the switch in a position where you can access it when driving.
7.
If the configuration cover sheet says a GPS/GPRS antenna is necessary, connect the GPS/GPRS antenna to the
datalogger. Put the antenna on the dashboard or on the parcel shelf.
8.
When the datalogger has recorded events, do section 5 of this Service Bulletin.
16 September, 2019
Page 22 of 23
SERVICE BULLETIN
SB-30-1282
Guide G: CCP (DB11 V8, Vantage 19MY)
1.
Make sure you have these items of equipment prepared:
1.
Influx datalogger – with SD card inserted
2.
Single OBD cable
3.
Rebel interface cable
4.
Trigger switch (if this is included on the cover sheet)
5.
Configuration Cover Sheet
6.
GPS and GPRS antenna (if this is included on the cover sheet)
2.
Make sure you have configured the datalogger (refer to section 4).
3.
Connect the single OBD cable into the OBD port on the driver’s side.
4.
Connect the 25-way and 15-way connectors into the datalogger.
5.
Connect the 22-way connectors. This links the OBD cable to the datalogger.
6.
If the Configuration Cover Sheet says a trigger switch is necessary, connect the trigger switch to the rebel interface
cable. Put the switch in a position where you can access it when driving.
7.
If the configuration cover sheet says a GPS/GPRS antenna is necessary, connect the GPS/GPRS antenna to the
datalogger. Put the antenna on the dashboard or on the parcel shelf.
8.
When the datalogger has recorded events, do section 5 of this Service Bulletin.
If you have any questions related to this Service Bulletin, please contact: Aston Martin
Technical Services
on: +44 (0) 1926 644720, email: [email protected],
Or contact your After Sales Manager.
The English version of this Service Bulletin is written in
Simplified Technical English to ASD-STE100™.
16 September, 2019
Page 23 of 23
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SB-30-1282
Replacement Service Bulletin Number:
MFR Communication Date: 2019-09-16
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.