GROUP

NUMBER

CAMPAIGN
DATE

19-01-022HG
MODEL(S)

August 2019

G80 (DH)
G90 (HI)

Technical Service Bulletin
SUBJECT:

OIL FILLER CAP REPLACEMENT (SERVICE CAMPAIGN 901G)

 IMPORTANT
*** Dealer Stock and Retail Vehicles ***
Dealers must perform this Service Campaign on all affected vehicles prior to customer retail
delivery and whenever an affected vehicle is in the shop for any maintenance or repair.
When a vehicle arrives at the Service Department, access Hyundai Motor America's "Warranty
Vehicle Information" screen via WEBDCS to identify open Campaigns.

Description: On certain 2018MY G80 (DH) and G90 (HI) vehicles equipped with Lambda engines,
the factory installed engine oil filler cap may have the incorrect text for engine oil viscosity printed on
top.
Follow the Service Procedure outlined in this bulletin.
Applicable Vehicles:
 Certain 2018MY G80 (DH) vehicles equipped with 3.8L or 3.3T Lambda engines.
 Certain 2018MY G90 (HI) vehicles equipped with 3.3T Lambda engines.
Parts Information:
Part Name

Oil Filler Cap

Part Number

Figure

26510-26630

1

901G

Campaign Sticker

00305-SC901-G

Dealer Code:
Date:
00305-SC901-G

Vehicle Emission
Recall-Proof of
Correction Card

NP050-09006

Quantity

1
(Apply under the hood in the
area below the Emission Label.)
1
(Must be completely filled out
and given to the vehicle owner.)

Circulate To: General Manager, Service Manager, Parts Manager, Warranty Manager, Service
Advisors, Technicians, Body Shop Manager, Fleet Repair

OIL FILLER CAP REPLACEMENT (SERVICE CAMPAIGN 901G)

SUBJECT:

Warranty Information:
Model
Op. Code

Operation

Op. Time

G80 (DH)
OIL FILLER CAP
80C037R0
0.2 M/H
REPLACEMENT
G90 (HI)
NOTE: Submit claim on Campaign Claim Entry Screen.

Causal Part

Nature Cause

26510-26630

B1A

ZZ7

Service Procedure:
1. Open the hood and visually confirm the text on the engine oil filler cap.
 The cap that reads “SAE 0W-30” must be REPLACED.
 It must be replaced with the cap that reads “SAE 5W-30”.

INCORRECT: SAE 0W-30
CORRECT: SAE 5W-30

KEEP - Cap reads “SAE 5W-30”

REPLACE - Cap reads “SAE 0W-30”

2. Remove the engine oil filler cap (with “SAE 0W-30” text on it) and discard.
3. Replace the removed engine oil filler cap with new oil filler cap.
 Confirm that the new oil filler cap has “SAE 5W-30” text on it.

TSB #: 19-01-022HG

Page 2 of 4
SUBJECT:

OIL FILLER CAP REPLACEMENT (SERVICE CAMPAIGN 901G)

SUBJECT:

For vehicles registered in California, Connecticut, Delaware, Maine, Maryland, Massachusetts,
New Jersey, New York, Oregon, Pennsylvania, Rhode Island, Vermont and Washington:
VEHICLE EMISSION RECALL - PROOF OF CORRECTION CARD
A Vehicle Emission Recall - Proof of Correction card must be filled out for all vehicles registered in
California, Connecticut, Delaware, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon,
Pennsylvania, Rhode Island, Vermont and Washington. Residents of these states, who own an
affected vehicle, will be required to possess a Vehicle Emission Recall - Proof of Correction card as
evidence of voluntary service campaign completion, when they apply for vehicle registration renewal.
WHAT TO DO WITH THE CARD:
The Vehicle Emission Recall - Proof of Correction card must be completed by the Dealership’s
Service Manager using a permanent ink pen. A fine point pen is recommended. When filling in the
information, copy the information directly from the vehicle, not from the repair order. ALL
INFORMATION MUST BE PRINTED AND NEAT.

The copy of the card shown below indicates the areas to be filled in. Each area must be filled in.
The completely filled out Vehicle Emission Recall - Proof of Correction card should be given to
the owner of the vehicle upon completion of the Campaign.
1. Enter Vehicle’s
License Number

2. Enter “Genesis”

3. Enter Model Year

4. Enter “G80” or “G90”

5. Enter the
vehicle’s VIN
Number

6. Enter “901G”

7. Enter
Dealership
Name

9. Enter
Date of
Repair

10. Service
Manager
Sign Here

TSB #: 19-01-022HG

8. Enter Dealership’s Address.
NOTE: Enter the physical address, not
the mailing address (not a P.O. Box)

Page 3 of 4
SUBJECT:

SUBJECT:

OIL FILLER CAP REPLACEMENT (SERVICE CAMPAIGN 901G)

Fill in the information on the 00305-SC901-G
Campaign Sticker and apply onto the hood in
the area below the Emission Label as shown.
Be sure to clean the mounting surface to
ensure proper label adhesion.
The campaign procedure is complete.

TSB #: 19-01-022HG

Page 4 of 4
SUBJECT: