NHTSA ID Number: 10164914
Manufacturer Communication Number: L-SB-0034-19
TSB/Document Date: 2019-09-16
Summary
TSB: This bulletin contains the vehicle specific pre-delivery services for 2020 model year LX570 vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for services to be performed.
L-SB-0034-19
August 21, 2019
2020 LX570 Pre-Delivery Service (PDS)
Service
Category
General
Section
Pre-Delivery Service
Market USA
Applicability
YEAR(S)
MODEL(S)
2020
LX570
ADDITIONAL INFORMATION
Introduction
This bulletin contains the vehicle specific pre-delivery services for 2020 model year LX570
vehicles. Additionally, refer to the applicable Pre-Delivery Service (PDS) Check Sheet for
services to be performed.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
N/A
Not Applicable to Warranty
–
–
–
–
Procedures
Front License Plate and Mounting Bracket Installation ......................................................... 2
D/C Cut Fuse (30A) Installation ........................................................................................... 4
Roof Rack Cross Bar and Leg Cover Installation .................................................................. 5
Towing Wire Harness Connector Installation ....................................................................... 7
© 2019 Lexus
, a division of Toyota Motor Sales, USA
Page 1 of 7
L-SB-0034-19
Rev1
August 21, 2019
Page 2 of 7
2020 LX570 Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation
The front license plate mounting bracket and two self-tapping screws for the 2020 model year
LX570 are stored in the rear cargo area of the vehicle. For states that require front license plate,
install the license plate and mounting bracket during PDS.
Remove the two radiator grille moldings by
disengaging the three claws on each.
Figure 1.
1
1
Attach the front license plate mounting
bracket hooks to the air intake of the
radiator grille and hold in place.
Radiator Grille Molding
Figure 2.
Align holes “A” of the mounting
bracket with the installation holes on
the radiator grille.
1
NOTE
2
Holes “A” are used to install the mounting
bracket to the bumper cover.
Holes “B” are used to install the front
license plate to the mounting bracket.
B
A
A
3
3
1
Mounting Bracket
2
Installation Hole
3
Hook
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0034-19
Rev1
August 21, 2019
Page 3 of 7
2020 LX570 Pre-Delivery Service (PDS)
Front License Plate and Mounting Bracket Installation (continued)
Install the mounting bracket to the radiator
grille using the two self-tapping
screws provided.
Figure 3.
NOTICE
Do NOT overtighten the
self-tapping screws.
1
3
4
Install the front license plate using two
noncorroding bolts with the
following dimensions:
2
1
Mounting Bracket
2
Self-tapping Screw
3
License Plate
4
Figure 4.
Nominal Length: 15.0 mm (0.59 in.)
Diameter: 6.0 mm (0.24 in.)
2
1
1
Nominal Length
2
Diameter
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0034-19
Rev1
August 21, 2019
Page 4 of 7
2020 LX570 Pre-Delivery Service (PDS)
D/C Cut Fuse (30A) Installation
To minimize battery discharge during transportation and storage, the D/C cut fuse (30A) has
been removed at the assembly plant and temporarily stored in the blank space of the relay block
in the engine compartment. During PDS, reinstall the D/C cut fuse (30A) into its original location
and confirm ALL related Diagnostic Trouble Codes (DTCs) are cleared.
Remove the D/C cut fuse (30A) from the blank space of the relay block in the engine
compartment and install the D/C cut fuse (30A) in the relay block as shown.
Figure 5.
1
Remove D/C Cut Fuse (30A)
2
Install D/C Cut Fuse (30A) Here
(Original Location)
3
Relay Block
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0034-19
Rev1
August 21, 2019
Page 5 of 7
2020 LX570 Pre-Delivery Service (PDS)
Roof Rack Cross Bar and Leg Cover Installation
To avoid damage during transportation, the 2020 model year LX570 roof rack cross bars have
been placed inside the vehicle at the assembly plant.
Install the roof rack cross bars and leg covers during PDS using the following procedure.
1. Loosen the adjustment knobs on each
cross bar joint.
Figure 6.
2. Slide the cross bar joints into the grooves
of the right and left roof rack rails with the
arrow mark on each cross bar joint
facing forward.
Figure 7.
1
NOTE
There is a possibility that the cross bars
will create wind noise if they are
installed backwards.
2
1
Front
2
Arrow Mark
© 2019 Lexus, a division of Toyota Motor Sales, USA
L-SB-0034-19
Rev1
August 21, 2019
Page 6 of 7
2020 LX570 Pre-Delivery Service (PDS)
Roof Rack Cross Bar and Leg Cover Installation (continued)
3. Position the front and rear cross bars so
that they are parallel to each other.
Figure 8.
A’
B’
A
4. Securely tighten the knobs on each
cross bar (A = A’, B = B’).
AREA
MEASUREMENT
A
250 mm (9.84 in.)
B
295 mm (11.60 in.)
B
NOTICE
If the knobs are NOT tightened securely,
the knobs may come loose and rattle or
possibly fall off the vehicle.
5. Install the right and left rear roof rack leg
covers in the following sequence
(labeled as shown):
Figure 9.
A
A. Insert the tab at the front of the cover
into the roof rack rail.
B. Place the cover on the leg and align the
rear part of the cover. Do NOT
press down.
1
C
D
2
C. Press the cover claws facing the
outside of the vehicle into place.
D. Press the cover claws facing the inside
of the vehicle into place.
NOTICE
1
Outside
2
Rear
Do NOT press on the claws facing
the outside of the vehicle at the
same time as pressing on the claws
facing the inside. This may damage
the leg cover.
6. Check that the covers are installed securely.
© 2019 Lexus, a division of Toyota Motor Sales, USA
B
L-SB-0034-19
Rev1
August 21, 2019
Page 7 of 7
2020 LX570 Pre-Delivery Service (PDS)
Towing Wire Harness Connector Installation
The towing wire harness connector set (towing wire harness connector assembly and two bolts)
is loaded in the vehicle at the assembly plant to avoid damage during transit.
During PDS, use the following procedure to install the towing wire harness connector to
the vehicle.
1. Connect the towing wire
harness connectors.
Figure 10.
A. Remove the water-resistant caps from
the two frame wire harness connectors.
1
B. Connect the two frame wire harness
connectors and two towing wire
harness connectors.
1
1
2. Install the towing wire harness assembly
bracket on the frame bracket using the
two bolts provided.
Figure 11.
Torque: 19.5 N*m (199 kgf*cm, 14 ft*lbf)
1
1
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: L-SB-0034-19
Replacement Service Bulletin Number:
MFR Communication Date: 2019-08-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【Looking for More Professional Vehicle Scan Tool?】iCarsoft E660 2026 Upgrade Version OBD2 scan tool can do it all-reads and clears trouble codes on Engine system, ABS system, Transmission system and Airbag system, And with 6 reset function. It covers more than 59 vehicle makes from 1996-2023 models ( included most USA/ Asia / EU vehicle brand) with full OBDII. (As every car model has its-owned specific car system and ECUs, not all car models have full car ECUs which may prevent the scanner from performing all listed system diagnostics or reset services. Therefore, please email to us with car VIN and services required to do scanner's services for a compatibility check before purchasing.)
- 【OE-Level 4 Systems OBD2 Scanner】iCarsoft E660 2026 Upgrade Version diagnostic scanner offers comprehensive OBDII services, allowing you to quickly scan Engine system. It supports functions such as reading and erasing codes, checking I/M readiness, viewing freeze frame data, performing O2 sensor tests, conducting on-board monitoring, testing the evap system, auto VIN retrieval, and reading both generic and specific codes, as well as DTCs and battery tests.
- 【4 Systems Diagnosis for 10000+ Vehicles】 iCarsoft E660 2026 Upgrade Version adopts unique diagnostic software, works well for most Porsche
, Benz, BMW, US Ford, Land Rover, Jaguar, Audi, VW, Volvo, Honda, Nissan, Infiniti, Toyota, Lexus, Scion, Isuzu, Hyundai, Kia, Daewoo, Mazda, Sprinter, Mini, Seat, Skoda, SAAB, EU Ford, Holden, AUS Ford, Acura, Subaru, Mitsubishi, Dacia, Renault, Fiat, GM, Chrysler, Citroen, Peugeot, Opel, Smart,Suzuki, Vauxhall, Alfa-Romeo, Lancia and etc. - 【6 Reset Services】iCarsoft E660 2026 Upgrade Version is a diagnostic tool that offers professional maintenance services, including Oil Reset, EPB, BMS, ETC, SAS, TPMS Reset. It can help you easily reset oil change indicators, recalibrate steering angle sensors, relearn replaced electric parking brake and so on. For optimal vehicle performance and maintenance convenience. (Tips: Please update the softwareafter receiving the product to obtain new service functions)
- 【118+ Real Time Record & Live Graph View】iCarsoft E660 2026 Upgrade Version can automatically record vehicle text history and identify vehicle information. Preserve real-time data information. View & Graph Live Data. Support Data Review and Print. 15 languages: English, German, Dutch, Spanish, French and so on. We promise to offer Lifetime updates (Lifetime free Update via PC), and confidence in products. We also provide 1 year warranty + extra lifetime hardware free repair if you need it in the future. We prioritize user experience & strive to meet your expectations. Please do feel free to reach out to us if you have any question or problem about the usage.
- WHY CHOOSE THE 2025 CR MAX -Upgrade the latest diagnostic capabilities for all vehicles after 1996: upgrade to 49+maintenance services; 46 extra specific functions; real all systems/all control modules diagnose; over 40K+ bidirectional actuation tests for diagnosing all control moduels of cars; Powerful full OBD2 Functions; built-in ECU Coding for BMW/ Audi/ VW/ RollsRoyce; Fr ee V.A.G Guide Function; Battery retistration for new battery adaptation and more. It covers all vehicle diagnostic services and some special professional vehicle maintenance servces, assists you to do home DIY vehicle maintenance or car repair as a pro technician.
- NEWEST IN INNOVATION FULL OBD2 SERVICES- iCarsoft auto car diagnostic scanner compatible with CAN-FD, CR MAX can do it all-reads and clears trouble codes, ALL SYSTEM DIAGNOSIS such as engine, transmission, ABS and airbag etc. CR MAX code reader for all cars can perform I/M Readiness, Live Data, Freeze Frame, Vehicle Information, Monitor Test, On-Board Monitor, E vap System Test,O2 Sensor Test,DTC Library Lookup,etc. (Warm Tips: If you car is after 2023,please contact us for compatibility; 3. It comes with 16PIN OBD2 diagnostic adapter, please check your car diagnostic socket if it is 16pin socket, if your car is 14pin diagnostic socket please contact us for the solution.)
- 49 RESET+ 46 SERVICES- Performs: Oil Reset, EPB,SAS,Throttle, D-P - F, Battery, ABS, Injector, TPMS, Suspension, AC, Head Lamp, Body Stablity, Engine, Tramsmission, Airbag, Seat, Door-Win-Roof, Fuel Pump, Door, E-G- R.+21 NEWEST SERVICES( Need update scanner)-AdBlue, Clutch, Crankshaft, High Voltage Battery, Cruise Control, NO xSensor, Rain Sensor, Stop And Start, Turbocharger, Head Up Display, Radar Camera, Vehicle Setup, Cyliner Misfire Check,Speedlimitassist, ControlUnitReset,OxygenSensor, Seatbelt. Extra 46+ extra services based on car brand.(Tips: Quantity of reset/ calibration fucitons are based on car system that your vehicle model has)
- REVOLUTIONARY 40000+BIDIRECTIONAL ACTIVE TESTS: Upgraded CR Max scanner equip with numberous of actuational test items for covering all available vehicle control modules, no longer only do simple light test or window test like other scanners, performs hardware modules test and software control modules test for checking car units or new updated control moduels work well or not after maintenance/ repair/ re-installation/ control system updated (Example for Benz- Roller Sun Blind test; Backup Camera test ;Self-test; EPB test; Transport Mode test;Boost Pressure Positioner test; Fuel Pump test; AND MORE!!).(Warm tip: The available test items are based on control modules your car has)
- ECU CODING+ BATTERY REGISTRATION- Powerful ECU Coding service for BMW/MINI/RollsRoyce / Audi/VW/Seat/Skoda/Bentley/Bugatti/Lamborghini, Improves Engine Power Performance and Optimizes Fuel Efficiency and Match New Hardware Unit to car and Customized a comfortable Driving Modes and Fixes & Updates Original Software Bug. The battery test function for checking car battery health, perform battery reset (BMS ) for replacing a damaged or aging car battery with a new one and register new battery to car ECU
- 【WHY CHOOSE CR PRO+】COST-EFFECTIVE BIDIRECTIONAL OBD2 SCANNER, COST 80 LESS THAN CR MAX, WITH THE SAME maintenance services as CR MAX, 49 Reset + 46 Brand-Specific services & ECU coding( for AU DI/BM W/ V W ONLY), OEM-level active tesing, multi-systems diagnostic(More than 4 basic systems), powerful full OBD2 functions. 2.0 GHz 4 core CPU, 16GB memory .Warm Tip: Some car models with FCA gateways, causing scanners failed diagnostic, please contact us for additional FCA adapter (please check the details in the following description）
- 【CONTACT US TO CONFIRM 】Few models need a special adapter cable, which will be available soon, please contact us for check if you are the following models: (2018&later) for Chrysler: 300, Great Jetdragon; for Dodge: Challenger, Warhorse, Durango, Cooley, Rams 1500, Rams 2500, Rams 3500, Rams 4500, Rams 5500; for JEEP: Grand Cherokee, Free Man, New Wrangler (JL), Grand Commander. (2019&later) for JEEP: Free Light, Compass. (2020&later)for JEEP: Gladiator. (2018&later) for Alfa Romeo: GIULIA; for Fiat: 500L, 500X, 500, Novo Uno fl, Toro. (2018&later) for Maserati. CONTACTING US FOR FCA GATEWAY ADAPTER.
- 【Bidirectional Test Covers 180,00+ vehicles】The CR Pro+ offers extensive actuator coverage, up to 9981 tests for AUDI A4, 4117 tests for Land Rover, 7092 tests for VW 0B-Magotan, 60776 tests for GM Chevrolet, 24611 for Benz S221, 3744 for Porsche, 114 for BMW. Beyond sending commands to basic control-units like headlights, mirrors, A/C clutches, fans, windows, doors and more, CR Pro+ CR Pro+ perform real-time bidirectional control with deeper ECU access, such as complex sensor or electronic responses or inner unit like fuel pump, injector, ignition coil, main relay, transmission coolant valve to catch potential issues. It enables you quickly locate the faults, avoid needless pa r.t swap.
- 【COST-EFFECTIVE 49 RESET SERVICE】iCarsoft Pro+features all Reset/ Adaptation/ Calibration/ Initialization service including ABS Reset/ Oil Reset/ EPB Reset/ ETC Reset/ INJ Reset/ SAS Reset/ BLD Reset/ BMS Reset/ LAP Reset/ SPS Reset/ TPMS Reset/ACS Reset/ AFS Reset/ FPP Reset/ IDL Reset/ BSC Reset/ Door Reset/ Seat Reset/ TCM Reset/ Service Interval Reset/ Brake Reset/ DWR Reset/ ECM Reset etc. IMPORTANT: CR PRO+ has been upgraded to provides numerous car maintenance functions for maintaining car systems/control units outside the systems corresponding to the above functions (in miscellaneous). NOTE:Above services vary by vehicle models, please contact us for the service list for your cars.
- 【OE MULTI-SYSTEMS DIAGNOSTICS】CR Pro+ can diagnose main vehicle systems like Engine, TCM, ABS, Airbag, Brake, BMS, Battery, windows, etc,AND ALSO diagnose vehicle specific systems like Antenna Module / Communication Control Module/ Parking Lock/Voice Control/ AC Reducing Agent Metering System,etc, helping to detect existing faults and potential faults, giving you complete vehicle health analysis. It displays module Info, real-time data graphs, such as transmission temperature, saves freeze frames to pinpoint intermittent faults. Note: Available systems vary by model. Each car model has unique systems. You can contact us for diagnoseable systems of your vehicle.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.