9

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - With particulate filter - Without DEF 16 MY - Install

44.20.89.01

9

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - With particulate filter - Up to 16 MY Install

44.20.89.01

10.1

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - Without particulate filter - Install

44.20.89.01

10.1

D1

LR071402

Range Rover

DESCRIPTION

SRO

TIME
(HOURS)

CONDITION
CODE

CAUSAL
PART

Automatic transmission insert - TDV8 4.4L
diesel - Without particulate filter - With DEF 16 MY - Install

44.20.89.01

8.8

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - Without particulate filter - Without
DEF - 16 MY - Install

44.20.89.01

8.8

D1

LR071402

Automatic transmission insert - V8 5.0L S/C
petrol - Install

44.20.89.01

9.6

D1

LR071402

SRO

TIME
(HOURS)

CONDITION
CODE

CAUSAL
PART

Automatic transmission insert - TDV6 3.0L
diesel - Twin Speed transfer case - Without
particulate filter - Install

44.20.89.01

9.6

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - Single Speed transfer case - Without
particulate filter - Install

44.20.89.01

9.6

D1

LR071402

Automatic transmission insert - V8 5.0L S/C
petrol - Install

44.20.89.01

9.7

D1

LR071402

Automatic transmission insert - GTDi 2.0L
petrol - Install

44.20.89.01

9.9

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - Twin Speed transfer case - With
particulate filter - Up to 16 MY - Install

44.20.89.01

9.6

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - Single Speed transfer case - With
particulate filter - Up to 16 MY - Install

44.20.89.01

9.6

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - Single Speed transfer case - With
particulate filter - With DEF - 16 MY - Install

44.20.89.01

9

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - Single Speed transfer case - With
particulate filter - Without DEF - 16 MY - Install

44.20.89.01

9

D1

LR071402

Automatic transmission insert - TDV6 3.0L
diesel - Twin Speed transfer case - With
particulate filter - With DEF - 16 MY - Install

44.20.89.01

9

D1

LR071402

Range Rover Sport
DESCRIPTION

DESCRIPTION

SRO

TIME
(HOURS)

CONDITION
CODE

CAUSAL
PART

Automatic transmission insert - TDV6 3.0L
diesel - Twin Speed transfer case - With
particulate filter - Without DEF - 16 MY - Install

44.20.89.01

9

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - Twin Speed transfer case - With
particulate filter - Up to 16 MY - Install

44.20.89.01

10.1

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - Twin Speed transfer case - Without
particulate filter - Install

44.20.89.01

10.1

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - Twin Speed transfer case - With
particulate filter - With DEF - 16 MY - Install

44.20.89.01

8.9

D1

LR071402

Automatic transmission insert - TDV8 4.4L
diesel - Twin Speed transfer case - With
particulate filter - Without DEF - 16 MY - Install

44.20.89.01

8.9

D1

LR071402

NOTE:
Normal Warranty procedures apply.

SERVICE INSTRUCTION:

Diagnosis
1.

Confirm the source of the oil leak using the TOPIx Workshop Manual (see TOPIx
Workshop Manual section 307-01: Diagnosis and Testing - 8HP70 8 - Speed
Automatic Transmission AWD - 8 - Speed Transmission issues - Oil Leak
Detection).
If the source of the oil leak has now been repaired, do not
continue with this bulletin.
If the source of the oil leak has not been repaired, continue to
'Transmission Oil Leak Repair'.

SERVICE INSTRUCTION:

Transmission Oil Leak Repair
WARNING:
Safety goggles, protective gloves and a mask must be worn when using Devcon
putty.

1.

Remove the transfer case (see TOPIx Workshop Manual section 308-07: Manual
Transmission/Transaxle, Clutch and Transfer Case -- Removal -- Transfer Case).

2.

NOTE:
Make sure the Devcon putty does not come into contact with the
transmission output shaft.



Apply suitable protective tape to the highlighted area of the transmission.

3.

NOTE:
To assist in completing the repair, watch the video as an example before
continuing with steps 4 - 6 (the video shows the 8HP45 transmission).



Use a suitable solvent-based cleaning fluid to thoroughly clean the highlighted
area of the transmission.

4.

CAUTION:
The highlighted area of the transmission must be free of all oil and
contamination before proceeding.

NOTES:
Devcon putty mix ratio: 4 parts resin / 1 part hardener. Refer to the
manufacturer's instructions for more information.
Make sure that the highlighted area of the transmission is fully covered
by a layer of Devcon putty.



Apply an even layer of Devcon putty to the highlighted area of the transmission.

5.



Use a suitable tool apply a layer of Devcon to the transmission insert.

6.

CAUTION:
Make sure that all machined faces are free of any contamination, Devcon,
etc. If Devcon contacts the machined faces, it must be cleaned/removed
immediately.



Using a suitable tool install the transmission insert into the area shown and apply
an even layer of Devcon putty to the transmission insert until it is completely
filled and covered.

7.

Allow the Devcon putty to completely cure:
The transfer case must be left for at least 8 hours before
installation.
The ambient air temperature must remain above 24°C for the
initial 45 minutes.
The ambient air temperature must remain above 16°C for the
remaining 7 hours, 15 minutes.
Refer to the manufacturer's instructions for more information.

8.

NOTE:
Do not install the transmission undershield until the transmission oil level
is checked in step 9.

Install the transfer case (see TOPIx Workshop Manual section 308-07: Manual
Transmission/Transaxle, Clutch and Transfer Case -- Installation -- Transfer Case).

9.

Check the transmission fluid level (see TOPIx Workshop Manual section 307-01 General Procedures - Transmission Fluid Level Check).