NHTSA ID Number: 10164443
Manufacturer Communication Number: WTV-81R
TSB/Document Date: 2019-09-05
Summary
Subaru
of America, Inc. (Subaru) is recalling all 2010-2014 model year Legacy and Outback vehicles equipped with a manual transmission (M/T), to replace the electronic parking brake (EPB) actuator ssembly. A total of 27,175 U.S. vehicles are affected by this recall.
ATTENTION:
CLAIMS PERSONNEL q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
SERVICE MANAGER
© 2018 Subaru of America, Inc. All rights reserved.
GENERAL MANAGER q
PARTS MANAGER
q
q
PRODUCT CAMPAIGN BULLETIN
APPLICABILITY:
SUBJECT:
2010-2014 MY Legacy and Outback (M/T models
NUMBER: WTV-81R
NHTSA ID: 18V-626
Electronic Parking Brake (EPB) Actuator
DATE: 10/30/18
REVISED: 08/26/19
INTRODUCTION:
Subaru of America, Inc. (Subaru) is recalling all 2010-2014 model year Legacy and Outback vehicles
equipped with a manual transmission (M/T), to replace the electronic parking brake (EPB) actuator
assembly. A total of 27,175 U.S. vehicles are affected by this recall.
Vehicles equipped with an automatic transmission are not affected by this recall. However, they
will be covered under an extended warranty. Details of the extended warranty coverage will be
forthcoming.
AFFECTED VEHICLES:
Model Year
Carline
Production Range
2010-2014
Legacy equipped with M/T
All M/T
2010-2014
Outback equipped with M/T
All M/T
Coverage for all affected vehicles must be confirmed by using the Vehicle Coverage Inquiry function
on subarunet.com. This information is available.
DESCRIPTION OF THE ISSUE AND SAFETY RISK:
Due to improper manufacturing processes, a capacitor on the circuit board and/or the actuator stroke
sensor magnetic ring located in the control unit of the EPB may crack over time. If either component
develops a crack, the brake telltale warning lamp will illuminate, and the EPB may not apply as
intended.
If the manual transmission (M/T) shift lever is not in the recommended gear when the vehicle is
parked and the EPB does not engage, the vehicle may roll away, increasing the risk of a crash.
Continued...
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS COULD
RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
Subaru Service Bulletins are intended for use by professional technicians ONLY. They
are written to inform those technicians of conditions that may occur in some vehicles,
or to provide information that could assist in the proper servicing of the vehicle. Properly
trained technicians have the equipment, tools, safety instructions, and know-how to
do the job correctly and safely. If a condition is described, DO NOT assume that this
Service Bulletin applies to your vehicle, or that your vehicle will have that condition.
Bulletin Number: WTV-81R; Revised: 08/26/19
Subaru of America, Inc. is
ISO 14001 Compliant
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is friendly
to our environment and in accordance with all
local, state and federal laws and regulations.
Page 1 of 10
DESCRIPTION OF THE REMEDY:
Once parts are available, the EPB actuator assembly will be replaced on all 2010-2014 model year
Legacy and Outback vehicles equipped with a manual transmission (M/T).
RETAILER RESPONSIBILITY:
Retailers are to promptly perform the applicable service procedures to correct all affected vehicles in
their inventory (used, demo & SSLP). Additionally, whenever a vehicle subject to this recall is taken
into retailer inventory, or in for service, necessary steps should be taken to ensure the recall correction
has been made before selling or releasing the vehicle.
Until this repair is performed, please advise owners of the information and parking tips listed below,
which are also described in the owner’s manual. Until this repair can be performed, the driver should
do the following when parking the vehicle:
•
Whenever possible, park the vehicle in a flat location.
•
When parking uphill, the front wheels should be turned away from
the curb as shown. Also, be sure to shift the M/T shifter into first gear
when parking uphill.
•
When parking downhill, the front wheels should be turned into the
curb as shown. Also, be sure to shift the M/T shift lever into reverse
gear when parking the vehicle downhill.
•
Apply the electronic parking brake (EPB) by depressing the brake
pedal and pressing the parking brake switch firmly.
Under normal operating conditions, the brake system warning light illuminates
with the parking brake applied while the ignition switch is in the “ON”
position. The light turns off when the parking brake is released.
However, the brake system warning light flashes when the EPB system is malfunctioning. If the brake
system warning light flashes, the driver should park the vehicle in a safe location as soon as possible,
taking the above precautions, and contact a Subaru retailer.
OWNER NOTIFICATION:
Interim owner notification letters were sent by first class mail in November, 2018, advising of this
recall and that parts were not yet available.
Now that parts are available, the affected owners will be notified again by mail on or around July 15,
2019, and by email if a valid email address is on file.
Continued...
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 2 of 10
RETAILER AFFECTED VIN LISTS:
Each Subaru retailer will receive an affected VIN list from their Zone Office when owner renotification begins. Vehicles will be assigned to retailers in the affected VIN list as follows:
• Original vehicle owners are assigned to the original selling retailer when their current address
is within a 100-mile radius of that retailer.
•
If the original selling retailer is inactive, the VIN has been assigned to the nearest active
retailer.
•
For any new owners or when original owners live more than 100 miles from the original
selling retailer, the VIN has been assigned to the nearest active retailer.
IMPORTANT: Retailer affected VIN lists include information for vehicles affected by this recall.
This information will enable retailers to follow up with owners of affected vehicles. The lists contain
owners’ names and phone numbers obtained from State Motor Vehicle Registration Records. The use
of such motor vehicle registration data for any other purpose is unlawful. Accordingly, retailers are
required to limit the use of these lists for the sole purpose of completing this recall.
PART INFORMATION:
Description
ACTR ASSY EPB
SELF-LOCK NUT
Part Number
Application
26002AJ04A
2010-2012MY M/T
26002AJ05A
2013-2014MY M/T
023508000
All, Qty. 4 / vehicle
SERVICE PROCEDURE / INFORMATION:
REMINDER: Customer satisfaction and retention starts with performing quality repairs.
The existing service procedure for replacing the EPB actuator assembly remain unchanged.
Always refer to the applicable Service Manual and review the full requirements of the repair
being performed. The Service Manual procedures contain information critical to performing an
effective repair the first time and every time. This includes but is not limited to: important SAFETY
precautions, proper inspection criteria, necessary special tools, required processes and related onetime-use parts needed for a complete and lasting repair.
ADDITIONAL SERVICE PROCEDURE TIP:
As part of reassembly, after installing the brake rotors, the parking brake must always be re-adjusted
BEFORE attempting to perform the Force Sensor Calibration Mode procedure.
IMPORTANT: Failure to perform the following parking brake adjustment procedure may cause
DTC(s) (e.g. C0271, C0253 and / or C0251) to set and create difficulty with completing the Force
Sensor Calibration Mode procedure successfully.
Continued...
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 3 of 10
Adjustment Procedure:
1) Remove the adjusting hole cover from the disc rotor.
2) Insert the flat tip screwdriver (b) into the brake adjustment hole (A) and rotate the adjusting screw
(a) until the brake shoes contact the disc rotor (c).
3) Loosen the adjusting screw by 5 notches in the opposite direction of the arrow.
• Operate the parking brake several times then confirm there is no brake drag.
•
If the adjusting screw is not loosened sufficiently, brake dragging may occur.
4) Install the adjusting hole cover to the disc rotor.
5) Install the rear wheels, lower the vehicle onto level ground, connect the SSM then proceed with
performing the Force Sensor Calibration Mode procedure.
IMPORTANT NOTES:
• Due to the age of some of these affected vehicles, before beginning disassembly, it is
STRONGLY recommended to clean any loose rust or corrosion from the exposed threads
and apply a penetrating lubricant to hardware that needs to be removed before disassembly.
Using Hand Tools Only is also STRONGLY recommended for this procedure.
•
AS LONG AS THERE WAS NO CUSTOMER CONCERN OF AN EPB FAILURE,
removed EPB assemblies can be scrapped when the repair is complete.
•
IF THE CUSTOMER REPORTED THE EPB FAILED AT ANY TIME, the removed EPB
assembly must be held for the standard parts holding period AND a QMR submitted with
details of the alleged EPB failure.
•
Any failed replacement parts (new part installed that later fails) must be held for the standard
parts holding period.
Continued...
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 4 of 10
SERVICE PROGRAM IDENTIFICATION LABEL:
Type or print the necessary information on a Campaign Identification Label.
The completed label should be attached to the vehicle’s upper radiator support.
Additional labels are available through normal parts ordering channels. The part
number is MSA6P1302, which comes as one sheet of 20 labels.
Part Number
Applicability
Description
Order Quantity
MSA6P1302
All Models
Campaign Completion Labels
(contains one sheet of 20 labels)
1
WTV-81
CLAIM REIMBURSEMENT AND ENTRY PROCEDURES:
Credit to perform this recall will be based on properly completed repair order information. Retailers
may submit claims through Subarunet.com.
Labor Description
Labor Operation #
Labor Time
Fail Code
Claim Type
WTV-81- EPB Actuator Assembly Replacement
A154-421
1.3
WTV-81
RC
IMPORTANT REMINDERS:
•
SOA strongly discourages the printing and/or local storage of service information as
previously released information and electronic publications may be updated at any time.
•
Always check for any open recalls or campaigns anytime a vehicle is in for servicing.
•
Always refer to STIS for the latest service information before performing any repairs.
Continued...
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 5 of 10
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists
in certain 2010-2014 model year Legacy and Outback vehicles equipped with a manual transmission
(M/T). These vehicles are also equipped with an electronic parking brake, which is operated by pushing
or pulling the parking brake switch. You received this notice because our records indicate that you
currently own one of these vehicles.
REASON FOR THIS RECALL:
Due to improper manufacturing processes, a capacitor on the circuit board and/or the actuator stroke
sensor magnetic ring located in the control unit of the electronic parking brake (EPB) may crack over
time. If either component develops a crack, the brake system warning lamp will flash, and the EPB may
not apply as intended.
If the manual transmission (M/T) shift lever is not in the recommended gear when the vehicle is parked
and the EPB does not engage, the vehicle may roll away, increasing the risk of a crash.
Remedy parts are not yet available.
Subaru is in the process of acquiring the parts necessary to perform this repair. Once there is a
sufficient supply of parts available, Subaru will contact you again by mail advising you to proceed with
scheduling an appointment with your Subaru retailer (dealer). We expect parts to be available in the
second quarter of 2019.
Continued...
Bulletin Number: ; Date
Page 6 of 10
PRECAUTIONS TO TAKE UNTIL THE REPAIR CAN BE PERFORMED:
Until this repair can be performed, please do the following when parking your vehicle:
•
Whenever possible, park your vehicle in a flat location.
•
When parking uphill, the front wheels should be turned away from the curb
as shown. Also, be sure to shift the M/T shifter into first gear when parking
uphill.
•
When parking downhill, the front wheels should be turned into the curb
as shown. Also, be sure to shift the M/T shift lever into reverse gear when
parking your vehicle downhill.
•
Apply the electronic parking brake (EPB) by depressing the brake pedal and
pressing the parking brake switch firmly
To release the EPB, pull the parking brake switch toward you while the ignition switch is
in the “ON” position with both the brake pedal and clutch pedal depressed.
Under normal operating conditions, the brake system warning light illuminates with the
parking brake applied while the ignition switch is in the “ON” position. The light turns off
when the parking brake is released.
However, the brake system warning light flashes when the EPB system is malfunctioning. If the brake system
warning light flashes, park your vehicle in a safe location as soon as possible, taking the above precautions, and
contact your Subaru retailer.
WHAT SUBARU WILL DO:
When remedy parts are available, Subaru will replace the electronic parking brake (EPB) actuator in your vehicle
at no cost to you. Subaru will notify you again by mail when remedy parts are available, advising you to proceed
with scheduling an appointment with your Subaru retailer.
CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?
If you have moved or sold your vehicle, please complete the enclosed prepaid postcard and mail it to us. Or if
you prefer to update this information online, please go to www.subaru.com, select ‘Customer Support,’ then select
‘Address Update’ or ‘Ownership Update’ from the drop-down menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR:
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement.
Reimbursement consideration will be based on the amount an authorized Subaru retailer in your area would
charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage
at the time of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing
address and telephone number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WTV-81 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Continued...
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 7 of 10
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt
to process your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be
completed.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’
For additional information, please go to: http://www.wtv81.service-campaign.com.
If you need additional assistance, please contact us directly:
• By e-mail: Go to: www.subaru.com and select “Contact Us”.
• By telephone: 1-844-373-6614 Monday through Friday between 8:00 a.m. and 7:00 p.m. ET.
• By U.S. Postal mail: Write us at:
Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification E-mail System, please go to:
https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration (NHTSA), 1200 New Jersey
Ave., SE, Washington, DC 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-4249153) or go to http://www.safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your
vehicle without charge within a reasonable amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action
in the interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience
this matter may cause and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
Notice to Lessors: Under Federal law the lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s)
within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the
applicable vehicle identification number (VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve
months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A
leased vehicle is a vehicle leased to another person for a term of at least four months.)
A subsidiary of SUBARU CORPORATION
Bulletin Number: WTV-81R; Revised: 08/26/19
Continued...
Page 8 of 10
OWNER NOTIFICATION LETTER
IMPORTANT SAFETY RECALL
This notice applies to the VIN below
Subaru of America, Inc
PO Box 9103
Camden, NJ 08101-9877
844-373-6614
www.subaru.com
Subaru Recall WTV-81
NHTSA ID 18V-626
July 2019
Dear Subaru Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
SUBARU OF AMERICA, INC. has decided that a defect, which relates to motor vehicle safety, exists in certain 2010-2014
model year Legacy and Outback vehicles equipped with a manual transmission (M/T). These vehicles are also equipped with
an electronic parking brake, which is operated by pushing or pulling the parking brake switch. You previously received a letter
informing you of this recall, stating that the remedy parts were not yet available.
This letter is to inform you that parts are now available.
REASON FOR THIS RECALL
Due to improper manufacturing processes, a capacitor on the circuit board and/or the actuator stroke sensor magnetic ring
located in the control unit of the electronic parking brake (EPB) may crack over time. If either component develops a crack, the
brake system warning lamp will flash, and the EPB may not apply as intended.
If the manual transmission (M/T) shift lever is not in the recommended gear when the vehicle is parked and the EPB does not
engage, the vehicle may roll away, increasing the risk of a crash.
WHAT SUBARU WILL DO
Subaru will replace the electronic parking brake (EPB) actuator in your vehicle at no cost to you.
WHAT YOU SHOULD DO
You should contact your Subaru retailer (dealer) for an appointment to have the electronic parking brake (EPB) actuator
replaced in your vehicle, free of charge. To minimize your inconvenience while the repair is being performed, please ask your
retailer for alternative transportation options.
PRECAUTIONS TO TAKE UNTIL THE REPAIR CAN BE PERFORMED
Until this repair can be performed, please do the following when parking your vehicle:
•
Whenever possible, park your vehicle in a flat location.
•
When parking uphill, the front wheels should be turned away from the curb as shown.
Also, be sure to shift the M/T shifter into first gear when parking uphill.
•
When parking downhill, the front wheels should be turned into the curb as shown. Also,
be sure to shift the M/T shift lever into reverse gear when parking your vehicle downhill.
•
Apply the electronic parking brake (EPB) by depressing the brake pedal and pressing
the parking brake switch firmly
To release the EPB, pull the parking brake switch toward you while the ignition switch is in the “ON”
position with both the brake pedal and clutch pedal depressed.
Under normal operating conditions, the brake system warning light illuminates with the parking
brake applied while the ignition switch is in the “ON” position. The light turns off when the parking
brake is released.
However, the brake system warning light flashes when the EPB system is malfunctioning. If the
brake system warning light flashes, park your vehicle in a safe location as soon as possible, taking
the above precautions, and contact your Subaru retailer.
Continued...
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 9 of 10
HOW LONG WILL THE REPAIR TAKE?
The time to perform this repair is less than 90 minutes. However, your retailer can provide you with a better estimate of the
overall time for this service visit, as it may be necessary to make your vehicle available for a longer period of time.
CHANGED YOUR ADDRESS OR SOLD YOUR SUBARU?
If you have moved or sold your vehicle, please update this information online at www.subaru.com, select ‘Customer Support,’
then select ‘Address Update’ or ‘Ownership Update’ from the drop-down menu.
IF YOU HAVE PREVIOUSLY PAID FOR A REPAIR
If you have already paid for repairs associated with this condition, you may be eligible for reimbursement. Reimbursement
consideration will be based on the amount an authorized Subaru retailer in your area would charge for the same repair.
Please send the original service repair order, which has the name of the repair facility, date of repair, mileage at the time
of repair, complete 17-digit vehicle identification number (VIN), and your name, with correct mailing address and telephone
number to the address listed below.
Subaru of America, Inc.
Customer-Retailer Services Department, Attention: WTV-81 Recall
P.O. Box 9103, Camden, NJ 08101-9877
Please send original receipts only and retain a photocopy for your records. Please be assured that we will attempt to process
your reimbursement request as quickly as possible, but it may take up to 60 days for this process to be completed.
IF YOU NEED FURTHER ASSISTANCE:
To locate the nearest Subaru retailer, you can access our website at www.subaru.com and select ‘Find a Retailer.’
For additional information, please go to: http://www.wtv81.service-campaign.com.
If you need additional assistance, please contact us directly:
•
By e-mail: Go to www.subaru.com and select “Contact Us”
•
By telephone: 1-844-373-6614
Monday through Friday between 8:00 a.m. and 7:00 p.m. ET
•
By U.S. Postal mail: Write us at Subaru of America, Inc.
Attn: Customer-Retailer Services Department
P.O. Box 9103, Camden, NJ 08101-9877
To subscribe to the NHTSA Recall Notification email System, please go to: https://www-odi.nhtsa.dot.gov/nhtsa/subscriptions.
Please contact us immediately if the Subaru retailer fails or is unable to make the necessary repairs free of charge.
You may also contact the Administrator, National Highway Traffic Safety Administration (NHTSA), 1200 New Jersey Ave., SE,
Washington, DC 20590 or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to http://www.
safercar.gov if you believe the Subaru retailer has failed or is unable to remedy your vehicle without charge within a reasonable
amount of time.
Your continued satisfaction with your Subaru is important to us. Please understand that we have taken this action in the
interest of your safety and your vehicle’s proper operation. We sincerely apologize for any inconvenience this matter may cause
and urge you to schedule an appointment as soon as possible.
Sincerely,
Subaru of America, Inc.
Notice to Lessors: Under Federal law the lessor of a vehicle who receives this letter must provide a copy of it to the vehicle lessee(s)
within 10 business days from receipt. The lessor must also keep a record of the lessee(s) to whom this letter is sent, the date sent, and the
applicable vehicle identification number (VIN). (For the purposes of this section, a lessor means a person or entity that in the last twelve
months prior to the date of this notification has been the owner, as referenced on the vehicle’s title, of any five or more leased vehicles. A
leased vehicle is a vehicle leased to another person for a term of at least four months.)
A subsidiary of SUBARU CORPORATION
Bulletin Number: WTV-81R; Revised: 08/26/19
Page 10 of 10
- Mixes well with conventional fluids
- Low-moisture formula provides excellent vapor lock...
- Ideal for hydraulic and disc brakes
- Provides an extra margin of safety in extreme braking...
- Mix of polyglycol ethers ensures hot brake-system operation...
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy...
- Both wet and dry boiling points exceed the minimum...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: WTV-81R
Replacement Service Bulletin Number:
MFR Communication Date: 2019-08-26
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: PARKING BRAKE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.