2020

A5/S5
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Interior

 Check Elsa for open campaigns and updates

 Verify operation of all seat belts and latches

 Verify Audi Phone Box Customer Registration form is present in car and fill out “Serial Number” field. Check Elsa
“Vehicle Information” Section or location sticker on car.
See TSB 2051720

 Check operation of window, lock, and seat controls*

 Perform any open campaigns*

 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights

 Perform diagnostic work*

 Verify SOS button is green and Roadside assistance button
LED will remain off. Reference TSB 2052299 if issues occur

Exterior

 Verify operation of heated seats

 Check all key buttons and features*

 Verify operation of heated rear seats (if equipped)

 Inspect exterior for damage, dings, dents and surface
scratches. Report and repair any damage before delivery to
the customer

 Verify operation of ventilated seats (if equipped)

Lighting and Windshield
 Test exterior lighting functions

 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Verify the glove compartment opens and closes properly
 Check panoramic sunroof and sunshade operation*

 Test windshield washers. Correct aim if necessary*

 Verify operation of front Passenger Occupant Detection
System

Trunk Inspection

Settings

 Verify trunk is operational

 Verify operation of MMI® touch

 Verify operation of emergency release handle

 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Set Time to “Automatic setting” and “Automatic time zone”

 Verify tool kit is installed securely in luggage compartment

 Verify and set language and measurement units*

 Set spare tire pressure*

 Verify Speech Dialog System is operating*

 Check battery clamps for proper torque*

 Set “Entertain. Fad.” in Parking aid to an audible level*
 Set “Music volume while parking” to medium*

Effective 8-22-2019-US
Version 1.0

PRE-DELIVERY INSPECTION (PDI) | 1

2020

A5/S5
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance (continued)

 Set dealership location in navigation (if equipped)*

 Check steering/tire alignment

 Turn off Manual Speed Warning (if equipped)*
Media / Radio / SAT

 Check for squeaks, rattles and wind noise. Repair any
squeaks, rattles or wind noises before delivery to the customer

 Verify operation of aux. input

 Calibrate rear view mirror*

 Insert SD card and test function of all slots

 Verify quality of radio reception in AM/FM/SiriusXM® bands

 Verify HD Radio is turned “off”*
Driver Assistance
Audi connect® (USA ONLY) (if equipped)

 Verify cruise control/ACC with Stop & Go functionality (if
equipped)

 Turn on the Wi-Fi® hotspot (if equipped)*

 Verify Audi side assist functionality (if equipped)

 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*

 Verify Audi active lane assist functionality (if equipped)

 Enable Google Earth view for navigation (if equipped)*

 Verify operation of parking system (if equipped)*
 Verify all vehicle Head-up display functionality (if equipped)*

On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)

 Activate NAV and follow directions back to dealership (if
equipped)

 Check steering, boots, brake system, hoses, tires and wheels
for damage

Convertible Functionality (if equipped)

 Check underside of vehicle for fluid leaks and loose components

 Test operation of power folding top*

 Install wheel locks (if equipped)

 Verify convertible top manual closing tools are present

 Install wheel bolt covers and center caps as supplied*
 Inspect wheel bolts for proper torque*

Post-Road Test Inspection

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server
 Check Service Interval and verify correct interval is displayed

Driving Performance

 Check engine oil level*

 Check horn operation

 Check all fluid levels and top off if necessary

 Verify hold and release of electronic parking brake

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles
 Test drive vehicle applying brakes several times*

 Apply 30 Day Inventory Maintenance Sticker**
 Install showroom charger to ensure battery remains
charged at all times**

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 8-22-2019-US
Version 1.0

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2