NHTSA ID Number: 10163945
Manufacturer Communication Number: NTB19-026
TSB/Document Date: 2019-08-19
Summary
2016 - 2018 TITAN XD; STATIC DISCHARGE FROM FUEL LINE IF YOU CONFIRM There is a static discharge from the fuel line causing a click or pop noise. NOTE: Concern is more likely to: - Be heard from under the center of vehicle. - Occur more often on dry days. - Occur at regular intervals about every 30 seconds to 1 minute. ACTION Install the tether assembly as described in the SERVICE PROCEDURE starting on the next page.
Classification:
Reference:
FE19-003
Date:
NTB19-026
July 18, 2019
2016 – 2018 TITAN XD; STATIC DISCHARGE FROM FUEL LINE
APPLIED VEHICLES:
APPLIED ENGINE:
2016 – 2018 Titan XD (A61)
Cummins
® 5.0L V8 Turbo Diesel
IF YOU CONFIRM
There is a static discharge from the fuel line causing a click or pop noise.
NOTE: Concern is more likely to:
Be heard from under the center of vehicle.
Occur more often on dry days.
Occur at regular intervals about every 30 seconds to 1 minute.
ACTION
Install the tether assembly as described in the SERVICE PROCEDURE starting on the next
page.
IMPORTANT: The purpose of ACTION (above) is to give you a quick idea of the work you
will be performing. You MUST closely follow the entire SERVICE PROCEDURE as it
contains information that is essential to successfully completing this repair.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/8
SERVICE PROCEDURE
1.
Locate the harness bracket located
between the fuel tank and fuel filter
housing (Stage 1).
Fuel filter
housing
(Stage 1)
Harness
bracket
Fuel
tank
Figure 1
2.
Remove the two (2) 10 mm bolts
securing the harness bracket to the
frame.
Remove
Figure 2
3.
Remove the harness clip from the
harness bracket.
Harness clip
Squeeze the back side of the
harness clip to release it from the
harness bracket.
Squeeze back
side of clip
Figure 3
2/8
NTB19-026
4.
Secure the harness bracket in a vise
to prepare for drilling.
1 inch
5.
Measure 1 inch (25.4 mm) from the
bend and .75 inch (19 mm) from the
side of the harness bracket.
Mark
6.
Make a mark where the
measurements intersect.
7.
Using a 5 mm drill bit, drill a hole
where the mark was made in the
previous step.
.75 inch
Figure 4
Figure 5
8.
Reinstall the harness bracket to the
frame using the two (2) 10 mm bolts
removed in step 2.
NOTE: Torque to 5.5 N•m (.56 kg-m,
49 in-lb).
5 mm hole
Figure 6
3/8
NTB19-026
9.
Reinstall the harness clip into the
harness bracket.
IMPORTANT: Use the original hole for
the harness clip. Do NOT use the new
hole.
Harness clip
Figure 7
4/8
NTB19-026
TETHER COMPONENTS
Tether
Panduit
tie strap
Clip
Metal
Panduit tie strap has a
domed top and metal tab
Figure 8
10.
Install the clip into the tether.
Tether and clip are listed in the PARTS INFORMATION on the last page.
Figure 9
Figure 10
5/8
NTB19-026
11.
Insert the tether with clip into the new
5 mm hole.
12.
Loosely wrap the Panduit tie strap
onto the fuel line indicated in Figure
12.
Panduit tie strap is listed in the
PARTS INFORMATION on the last
page.
13.
Fold the tether around to contact the
fuel line as shown in Figure 12 and
Figure 13.
14.
Insert the tether into the Panduit tie
strap.
Figure 11
IMPORTANT:
Make sure the tether is
contacting the area of the fuel line
shown in Figure 13.
ONLY use the Panduit tie strap
listed in the PARTS
INFORMATION on the last page
as it has a metal tab that is
required for this repair. (See Figure
8 on page 5)
Figure 12
Align the Panduit tie
strap onto the
center section of
the tether end
Panduit tie strap
Tether
Attach the tether
to this area
Figure 13
6/8
NTB19-026
16.
Trim the excess material from the Panduit tie strap as shown in Figure 14.
EXAMPLE OF COMPLETED INSTALLATION
Panduit tie strap
Tether
Figure 14
7/8
NTB19-026
PARTS INFORMATION
DESCRIPTION
PART NUMBER
QUANTITY
Tether
17429 – 9FT0C
1
Clip
17571 – 9EG0C
1
Panduit tie strap
BT4M (1)
1
(1) Local Tie strap supplier: For help finding a local source for the Panduit BT4M Tie
strap, contact Panduit at 1-800-777-3300.
CLAIMS INFORMATION
Submit a Primary Part (PP) type line claim using the following claims coding:
DESCRIPTION
PFP
OP CODE
SYM
DIA
FRT
Install tether assembly
(1)
FX62AA
ZL
32
0.4
(1) Reference the Parts Information table above, and use the Tether as the Primary Failed
Part (PFP).
EXPENSE CODE
EXPENSE CODE
041
DESCRIPTION
Panduit tie strap
MAX. AMOUNT
$.50
AMENDMENT HISTORY
PUBLISHED DATE REFERENCE
July 18, 2019
NTB19-026
DESCRIPTION
Original bulletin published
8/8
NTB19-026
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB19-026
Replacement Service Bulletin Number:
MFR Communication Date: 2019-07-18
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: FUEL SYSTEM, GASOLINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.