NHTSA ID Number: 10162772
Manufacturer Communication Number: T-SB-0141-18_Rev
TSB/Document Date: 2019-07-15
Summary
TSB: REVISION NOTICE June 19, 2019 Rev1: ? The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2011 ? 2018 model year Sienna vehicles may exhibit a condition where the power slide door cable becomes separated, causing the power slide door to become inoperative. Follow the Repair Procedure in this bulletin to reduce this condition.
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Service
Category
Vehicle Exterior
Section
Door/Hatch
Market USA
Applicability
YEAR(S)
MODEL(S)
2011 - 2018
Sienna
ADDITIONAL INFORMATION
REVISION NOTICE
June 19, 2019 Rev1:
The Parts Information section has been updated.
Any previous printed versions of this bulletin should be discarded.
Introduction
Some 2011 – 2018 model year Sienna vehicles may exhibit a condition where the power slide
door cable becomes separated, causing the power slide door to become inoperative. Follow the
Repair Procedure in this bulletin to reduce this condition.
Warranty Information
OP CODE
DESCRIPTION
TIME
OFP
T1
T2
BD1814
R & R Power Sliding Door Cable (One Side)
0.8
72
12
Combo A
Opposite Side
0.7
85015-08010
85016-08010
APPLICABLE WARRANTY
This repair is covered under the Toyota
Basic Warranty. This warranty is in effect for 36 months
or 36,000 miles, whichever occurs first, from the vehicle’s in-service date.
Warranty application is limited to occurrence of the specified condition described in
this bulletin.
© 2019 Toyota Motor Sales, USA
Page 1 of 11
T-SB-0141-18
Rev1
November 26, 2018
Page 2 of 11
Power Slide Door Cable Replacement
Parts Information
PART NUMBER
PREVIOUS
NEW
85015-08010
04009-02108
PART NAME
QTY
Cable Sub-Assy, Power Slide Door, RH
1
Molding, Slide Rail End, RH
1
Cable Sub-Assy, Power Slide Door, LH
1
Molding, Slide Rail End, LH
1
04009-02308
85016-08010
04009-02208
04009-02408
Required Tools & Equipment
SPECIAL SERVICE TOOLS (SST)
PART NUMBER
QTY
Plastic Pry Tool Kit*
00002-06020-01
1
*Essential SST.
NOTE
Additional SSTs may be ordered by calling 1-800-933-8335.
Repair Procedure
NOTE
Right-hand door disassembly and assembly is shown. Left-hand door disassembly and assembly is similar.
Disassembly
1. Deactivate the power slide door system by
switching the power slide door main switch
to the OFF position.
Figure 1.
1
NOTE
The orange mark on the switch should NOT
be visible when the switch is OFF.
2
1
OFF
2
ON
© 2019 Toyota Motor Sales, USA
T-SB-0141-18
Rev1
November 26, 2018
Page 3 of 11
Power Slide Door Cable Replacement
Repair Procedure (continued)
Disassembly (continued)
2. Using a molding remover, disengage the
claw and two clips, disconnect the power
window switch electrical connector, and
remove the rear door armrest base panel.
Figure 2.
1
1
Molding Remover
Claw
Clip
3. Disengage the 17 clips and remove the
rear door trim board sub-assembly.
Figure 3.
© 2019 Toyota Motor Sales, USA
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Repair Procedure (continued)
Disassembly (continued)
4. Remove the clip and the rear door
glass weatherstrip inner with slide door
window garnish.
Figure 4.
5. Disengage the claw and two clips and
remove the slide rail end molding.
Figure 5.
NOTE
Open the rear quarter glass to access the
slide rail end molding.
Claw
Clip
© 2019 Toyota Motor Sales, USA
Page 4 of 11
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Repair Procedure (continued)
Disassembly (continued)
6. Remove the power slide door cable assembly.
A. Remove the bolt, depress the two tabs,
and remove the No. 2 center bracket
from the slide door cable assembly.
Figure 6.
B. Remove the two bolts, depress the
two tabs, and remove the No.1 center
bracket from the slide door
cable assembly.
Figure 7.
C. Remove the two bolts from the slide
door center hinge.
Figure 8.
NOTICE
Be careful to not scratch or damage
surrounding painted surfaces
while removing.
© 2019 Toyota Motor Sales, USA
Page 5 of 11
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Repair Procedure (continued)
Disassembly (continued)
D. Remove the three bolts from the upper
cable guide.
Figure 9.
E. Route the cable ends through the
opening in the slide door.
F. Remove the three screws from the slide
door cable assembly.
Figure 10.
G. Remove the power slide door
cable assembly.
© 2019 Toyota Motor Sales, USA
Page 6 of 11
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Repair Procedure (continued)
Installation
1. Install the NEW power slide door cable assembly.
A. Route the cable ends through the
slide door.
Figure 11.
B. Install the three bolts to the upper
cable guide.
Torque: 7.1 N*m (72 kgf*cm, 63 in*lbf)
C. Install the two bolts to the slide door
center hinge.
Figure 12.
Torque: 7.1 N*m (72 kgf*cm, 63 in*lbf)
NOTE
Ensure that the cables are NOT crossed
AFTER installation.
NOTICE
Be careful to not scratch or damage
surrounding painted surfaces
during installation.
D. Engage the two tabs on the cable end
to the No. 1 center bracket, clip the
cable guide to the No. 1 center bracket,
install the two bolts, and install the
No. 1 center bracket.
Figure 13.
Torque: 7.5 N*m (76 kgf*cm, 66 in*lbf)
NOTICE
Ensure proper cable routing
AFTER installation.
© 2019 Toyota Motor Sales, USA
Page 7 of 11
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Repair Procedure (continued)
Installation (continued)
E. Engage the two tabs on the cable
end to the No. 2 center bracket,
install the bolt, and install the
No. 2 center bracket.
Figure 14.
Torque: 7.5 N*m (76 kgf*cm, 66 in*lbf)
F. Disengage the five tabs and remove the
protective cover from the cable spool.
Figure 15.
NOTE
Take care to prevent the spool from
separating from the housing after the
protective cover is removed.
© 2019 Toyota Motor Sales, USA
Page 8 of 11
T-SB-0141-18
Rev1
November 26, 2018
Page 9 of 11
Power Slide Door Cable Replacement
Repair Procedure (continued)
Installation (continued)
G. Install the cable spool onto the power
slide door motor and install the
three screws.
Figure 16.
NOTE
Take care to prevent the spool from
separating from the housing while
installing the spool to the
motor assembly.
Torque: 1.4 N*m (14 kgf*cm, 12 in*lbf)
2. Test the power slide door operation.
A. Temporarily activate the power slide
door system by switching the power
slide door main switch to the ON
position and test for proper operation.
Figure 17.
1
NOTE
The orange mark on the switch should be
visible when the switch is ON.
2
B. Deactivate the power slide door system
by switching the power slide door main
switch to the OFF position, after testing
for proper operation.
NOTE
1
OFF
2
ON
The orange mark on the switch should
NOT be visible when the switch is OFF.
© 2019 Toyota Motor Sales, USA
T-SB-0141-18
Rev1
November 26, 2018
Power Slide Door Cable Replacement
Repair Procedure (continued)
Installation (continued)
3. Engage the claw and two clips and install
the slide rail end molding.
Figure 18.
Claw
Clip
4. Engage the clip to install the rear door
glass inner weatherstrip with slide door
window garnish.
Figure 19.
© 2019 Toyota Motor Sales, USA
Page 10 of 11
T-SB-0141-18
Rev1
November 26, 2018
Page 11 of 11
Power Slide Door Cable Replacement
Repair Procedure (continued)
Installation (continued)
5. Engage the 17 clips and install the rear
door trim board.
Figure 20.
6. Connect the power window switch connector.
7. Engage the claw and two clips and install
the rear door armrest base upper panel.
Figure 21.
Clip
Claw
8. Enable the power slide door system by switching the power slide door main switch to the
ON position.
NOTE
The orange mark on the switch should be visible when the switch is ON.
© 2019 Toyota Motor Sales, USA
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: T-SB-0141-18_Rev
Replacement Service Bulletin Number:
MFR Communication Date: 2019-06-19
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: STRUCTURE:BODY:DOOR
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.