7/2/2019

N334NAS1 - Service Action: Engine Malfunction Indicator Lamp (MIL) Illuminated | TOPIx

N334NAS1

TECHNICAL BULLETIN
13 JUN 2019

© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians
with the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land
Rover service facility to determine whether this bulletin applies to a specific vehicle.

SECTION:
303-14

S U B J E C T/ C O N C E R N :
Service Action: Engine Malfunction Indicator Lamp (MIL) Illuminated

AFFECTED VEHICLE RANGE:
MODEL:
Range Rover Velar (LY)

MODEL YEAR:
2018

VIN:
700192-736787

ASSEMBLY PLANT:
Solihull

APPLICABILITY:
INGENIUM I4 2.0L Petrol

MARKETS:
NORTH AMERICA

CONDITION SUMMARY:

SITUATION:
https://topix.landrover.jlrext.com/topix/content/document/view?id=999021

1/4

7/2/2019

N334NAS1 - Service Action: Engine Malfunction Indicator Lamp (MIL) Illuminated | TOPIx

A potential issue has been identified on certain Jaguar vehicles within the listed Affected Vehicle
Range where the engine Malfunction Indicator Lamp (MIL) may incorrectly display on the Instrument
Cluster with Diagnostic Trouble Code (DTC) P013E-00 stored in the Powertrain Control Module (PCM).
ACTION:
Retailers are required to HOLD affected new vehicles that are within your control and refrain from
releasing the vehicles for new vehicle sale pending completion of the procedure(s) detailed in this
Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection
(PDI) process but must have it completed prior to vehicle handover to the customer.
Affected vehicles already in the hands of customers should be updated at the next available
opportunity.

SPECIAL TOOLS:
Jaguar Land Rover-approved Battery Power Supply
Jaguar Land Rover-approved diagnostic equipment with latest PATHFINDER software

WARRANT Y:

NOTE:
Use the Jaguar Land Rover claims submission system to make sure that a vehicle is eligible for
this program prior to undertaking any rework action.
At the time of confirming a booking for vehicle repair, make sure that all open Recall and Service
Actions are identified to make sure the correct parts are available and adequate workshop time is
allocated for repairs to be completed at one visit.
Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will
result in payment of the stated time. The SRO and parts information is included for information only.
The Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle
is brought back into the workshop for this action alone to be undertaken.

https://topix.landrover.jlrext.com/topix/content/document/view?id=999021

2/4

7/2/2019

N334NAS1 - Service Action: Engine Malfunction Indicator Lamp (MIL) Illuminated | TOPIx

Repair procedures are under constant review and therefore times/prices are subject to change; those
quoted here must be taken as guidance only. Use TOPIx to obtain the latest repair time.
Warranty claims must be submitted or payment within 30 calendar days of completion of the repair.
PROGRAM
CODE

OPTION
CODE

DESCRIPTION

SRO

TIME
(HOURS)

N334

A

Powertrain Control Module (PCM) - Update Replace ECU

85.18.03

0.2

N334

B

Powertrain Control Module (PCM) - Update Replace ECU
Drive in/drive out

85.18.03
02.02.02

0.2
0.2

Normal Warranty policies and procedures apply.

DIAGNOSTIC PROCEDURE:

CAUTION:
A Jaguar Land Rover-approved battery power supply must be connected to the vehicle startup
battery during diagnosis / module programming.
1

2

Connect the Jaguar Land Rover-approved battery power supply to the vehicle startup battery.

NOTE:
The Jaguar Land Rover-approved diagnostic equipment must be loaded with
PATHFINDER version 238 (or later).
Connect the Jaguar Land Rover-approved diagnostic equipment to the vehicle and begin a
new session.

3

NOTE:

https://topix.landrover.jlrext.com/topix/content/document/view?id=999021

3/4

7/2/2019

N334NAS1 - Service Action: Engine Malfunction Indicator Lamp (MIL) Illuminated | TOPIx

The Jaguar Land Rover-approved diagnostic equipment will read the correct Vehicle
Identification Number (VIN) for the current vehicle and automatically take the vehicle
out of Transit mode (if required).
Follow all on-screen instructions.
4

Select ECU Diagnostics.

5

Select Powertrain Control Module [PCM].

6

Select Update ECU.
1 Follow the on-screen instructions until the application finishes successfully.
2 Go to the next Step.

7

Exit the current session.
1 Only if required: set the vehicle to Transit mode.
2 Select the Exit icon.

8

Disconnect the diagnostic equipment and battery power supply from the vehicle.

https://topix.landrover.jlrext.com/topix/content/document/view?id=999021

4/4