Page 1 of 10

TECHNICAL SERVICE BULLETIN
Glove Compartment Misaligned

19-2206
27 June 2019

This bulletin supersedes 19-2071. Reason for update: New Part/Procedure For Same Condition
Model:
Ford
2015-2019 F-150
Summary
This article supersedes TSB 19-2071 to update the Service Procedure.
Issue: Some 2015-2019 F-150 vehicles may exhibit a glove compartment door that appears misaligned
along the storage tray or right side instrument panel when closed. This may be due to the position of the
glove compartment storage tray rubber mat or the seating of the glove compartment door strikers or glove
compartment door hinge pins. To correct the condition, follow the Service Procedure steps to reposition or
adjust the affected component.
Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the
following criteria:
• 2015-2019 F-150
• Glove compartment door appears misaligned
Parts
Part
Number
15060T10

Description

Quantity

Glove Compartment Door - Refer To The Parts Catalog For The VIN Specific
Application

1

Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP
coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are
determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
Operation
No.

Description

Time

2015-2019 F-150: Inspect And Adjust Glove Compartment Door Following The
Service Procedure (Do Not Use With Any Other Labor Operations)

192206A

0.3
Hrs.

2015-2019 F-150: Inspect, Adjust Glove Compartment Door Following The Service
Procedure And Replace The Glove Compartment Door (Do Not Use With Any
Other Labor Operations)

192206B

0.4
Hrs.

Repair/Claim Coding
Causal Part:

15060T10

Condition Code: 07

Service Procedure

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 2 of 10

1. Inspect the glove compartment door in the closed position. Does the glove compartment exhibit a
misalignment at the storage tray and/or right side instrument panel with no other visible defect? (Figures
1-4)
(1). Yes - proceed to Step 2.
(2). No - this article does not apply. Refer to the Workshop Manual (WSM), Section 501-12 for normal
diagnostics.
Figure 1

Figure 2

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 3 of 10

Figure 3

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 4 of 10

Figure 4

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 5 of 10

2. Inspect the glove compartment storage tray rubber mat. Is the mat properly seated and flush on both
ends of the instrument panel? (Figures 5-6)
(1). Yes - proceed to Step 4.
(2). No - proceed to Step 3.
Figure 5

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 6 of 10

Figure 6

3. Remove the rubber mat and close the glove compartment door. Refer to WSM, Section 501-12. Does
the glove compartment door close properly?
(1). Yes - The rubber mat was installed incorrectly. Install the rubber mat making sure the right hand
side is properly tucked and seated to the instrument panel. Refer to WSM, Section 501-12. Proceed to
Step 4.
(2). No - install the rubber mat and proceed to Step 4. Refer to WSM, Section 501-12.
4. Inspect the glove compartment door left and right side strikers. Are the strikers fully seated? (Figures
7-9)
(1). Yes - proceed to Step 6.
(2). No - proceed to Step 5.
Figure 7

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 7 of 10

Figure 8

Figure 9

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 8 of 10

5. Remove the improperly installed striker using a non-marring pry tool and reinstall. Make sure the striker
is fully seated.
6. Inspect the glove compartment door hinge pins. Are both pins fully seated? (Figure 10)
(1). Yes - proceed to Step 8.
(2). No - proceed to Step 7.
Figure 10

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 9 of 10

7. Remove and reseat the hinge pins.
8. Close the glove compartment door and inspect for proper alignment. Is the door properly aligned and
latched on both sides?
(1). Yes - repair is complete.
(2). No - proceed to Step 9.
9. Remove the bumpers from the glove compartment door and close it. Does the glove compartment door
latch properly? (Figure 11)
(1). Yes - if the glove compartment door closes properly with the bumpers removed, the bumpers have
taken a set in the door open position giving the appearance the glove box is warped. Bumpers that
have taken a set in the open position increase closing force and inhibit proper latching.
• Install the bumpers and close the glove compartment door fully. Make sure both sides are latched. Increased
closing force may be required to properly latch the glove compartment door. Inform the customer that it takes 2
to 24 hours for the bumpers to become set in the closed position depending on ambient temperature. Repair is
complete.

(2). No - proceed to Step 10.
Figure 11

10. Replace the glove compartment door. Refer to WSM, Section 501-12.

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019

Page 10 of 10

© 2019 Ford Motor Company
All rights reserved.
NOTE: The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge,
tools, and equipment to do the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or
provides information that could assist in proper vehicle service. The procedures should not be performed by "do-it-yourselfers". Do
not assume that a condition described affects your car or truck. Contact a Ford or Lincoln dealership to determine whether the
Bulletin applies to your vehicle. Warranty Policy and Extended Service Plan documentation determine Warranty and/or Extended
Service Plan coverage unless stated otherwise in the TSB article. The information in this Technical Service Bulletin (TSB) was
current at the time of printing. Ford Motor Company reserves the right to supersede this information with updates. The most recent
information is available through Ford Motor Company's on-line technical resources.

http://www.fordservicecontent.com/Ford_Content/vdirsnet/TSB/EU/~WTSB19-2206/US/E...

7/1/2019