NHTSA ID Number: 10162026
Manufacturer Communication Number: SA-026-19
TSB/Document Date: 2019-07-02
Summary
Not only does the diesel engine have unique features compared with a traditional gasoline engine, but the Mazda
SKYACTIV-D 2.2L has many unique features even when compared with a conventional diesel engine. For this reason, we are providing the following necessary basic information for service. Please familiarize yourself with the material so that you understand and can explain the unique features and operation of this engine. I. TECHNICAL FEATURES: Common Rail Injection System, Diesel Particulate Filter (DPF), Selective Catalytic Reduction (SCR) System, NSC (NOx Storage Catalyst) Control, II. CUSTOMER ADVICE: Before Driving, Starting the Engine, Turning the Engine Off, When Driving, Maintenance III. REPAIR: Fuel Injector Installation IV. PRE-DELIVERY INSPECTION (PDI): Diesel Particulate Filter (DPF) Regeneration
Page 16 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
See Owner's
Manual ->
Maintenance
and Care ->
Maintenance
Monitor
(Engine Oil)
CAUTION:
SKYACTIV-D 2.2L uses specified oil. Please confirm the specification in owner's manual. If
engine oil other than the specified oil is used, the Diesel Particulate Filter effective period
of use will be shortened or the Diesel Particulate Filter may be damaged.
NOTE:
Whenever the engine oil is replaced, the vehicles engine control unit needs to be reset as
soon as possible. Otherwise, the engine oil warning light or the wrench indicator light may
display at the wrong time.
(Technical Background)
1. During DPF regeneration, soot or particulate matter (PM) inside the DPF is burnt off
and as a result, ash accumulates inside the DPF. The main sources of soot comes from
engine oil additives. The accumulation of ash in the DPF is an important factor limiting
the service life of the DPF. Since the DPF used in the SKYACTIV-D is light and compact,
its capacity is relatively small. Therefore, in order to retain DPF longevity, the use of
low ash oil is very important.
2. The DPF capacity is diminished when using oils other than Mazda Genuine SKYACTIV-D
SAE as they contain too much ash.
3. Use of non-specified oils also results in premature oil dilution due to the frequent DPF
regeneration attempts to remove the ash.
▼Inspecting Engine Oil Level
When inspecting the engine oil level, pull out the dipstick straight without twisting. In
addition, when inserting the dipstick, always insert it without twisting so that the “X” mark
faces the front of the vehicle.
See Owner's
Manual ->
Maintenance
and Care ->
Fuel Filter
Page 17 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
1. Be sure the vehicle is on a level surface.
2. Warm up the engine to normal operating temperature.
3. Turn it off and wait at least 5 minutes for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and reinsert it fully.
5. Pull it out again and examine the level. The level is normal if it is between the MIN and
MAX marks. If it is near or below MIN, add enough oil to bring the level to MAX.
CAUTION:
Do not overfill the engine oil. This may cause engine damage.
6. Make sure the O-ring on the dipstick is positioned properly before reinserting the
dipstick.
7. Reinsert the dipstick fully.
NOTE:
1. Inspect the engine oil level periodically. When inspecting the engine oil, if the engine
oil level exceeds the “X” mark on the dipstick, replace the engine oil. This should be
done by an Authorized Mazda Dealer.
2. When replacing the engine oil, inspect the oil level using the dipstick and refill so that
the engine oil level is within the MIN and MAX range, as shown below.
(Technical Background)
1. The PCM calculates the engine oil level based on the engine oil level sensor signal and
the vehicle driving information. When engine oil level high is determined, the
instrument cluster displays a message "Engine Oil Level High" and DTC P252F:00 is
Page 18 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
stored. Overfilling the engine oil leads to an early determination of "Engine Oil Level
High".
2. During DPF generation control, extra fuel is injected after the main injection to increase
the temperature and burn off excess PM. This can cause engine oil dilution and
gradually raise the oil level.
▼Maintenance Monitor (Engine Oil)
The vehicle calculates the remaining oil life based on engine operating conditions. The
vehicle lets you know when an oil change is due by illuminating the wrench indicator light
in the instrument cluster.
1. Select the
icon on the home screen to display the Applications screen.
2. Select “Vehicle Status Monitor”.
3. Select “Maintenance” to display the maintenance list screen.
4. Switch the tab and select the "Oil Change". You can customize settings in the setup
display as follows:
Item
Explanation
Setting Interval
Oil replacement period can be selected from the flexible setting or
fixed setting.
Once engine oil flexible maintenance is selected, the vehicle
calculates the remaining oil life based on the engine operating
conditions.
The vehicle lets you know when an oil change is due by illuminating
the wrench indication/indicator light in the instrument cluster.
Displays the distance until the oil replacement is due. Select this
Distance (mile or km)
item to set the oil replacement distance.
(Displays only in fixed The wrench indication/indicator light in the instrument cluster will
setting)
be illuminated when the remaining distance is less than 600 miles
(1,000 km) (*1).
Distance (mile or km)
Displays the distance until the oil replacement is due.
(Displays only in
The wrench indication/indicator light in the instrument cluster will
flexible setting)
Page 19 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
be illuminated when the remaining distance is less than 600 miles
(1,000 km).
Reset
Resets the remaining distance to the initial value.
Once the system turns on, it needs to be reset whenever replacing
the engine oil.
Item
Explanation
Setting Interval
Oil replacement period can be selected from the fixed setting. The
vehicle lets you know when an oil change is due by illuminating the
wrench indicator light in the instrument cluster.
Displays the distance until the oil replacement is due. Select this
item to set the oil replacement distance.
Distance (mile or km) The wrench indication/indicator light in the instrument cluster will
be illuminated when the remaining distance is less than 1,000 km
or 600 mile (*1).
Resets the remaining distance to the initial value.
Reset
Once the system turns on, it needs to be reset whenever replacing
the engine oil.
1. The PCM performs the following calculations, and when any of the following exceed
their specifications, it determines that the engine oil replacement period has been
reached.
- Traveled distance
- Elapsed days (* counts only when room fuse is installed)
- Engine oil deterioration condition
1. Engine oil data reset can be performed not only on the Reset menu of the Maintenance
Monitor, but also by M-MDS, the TEST TERMINAL and the TRIP METER Switch. Refer to
Workshop Manual for details.
▼Fuel Filter
1. Fuel Filter needs to be replaced according to the Scheduled maintenance table.
2. When fuel filter (sedimentor) draining is required, the wrench indication is displayed
with the message "Water must be drained from fuel filter"
Page 20 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
(Technical Background)
1. The fuel filter is installed in the engine compartment.
2. Fuel filter consists of a fuel warmer (with fuel warmer) and sedimentor switch. If the
water level in the sedimentor exceeds a certain level, the sedimentor switch turns on,
which is input to the PCM.
3. When the outside temperature is low, diesel fuel (light oil) may freeze and clog the fuel
filter, leading to problems such as the engine not starting. When driving to a cold
region, advise the customer to add winter grade diesel fuel as soon as possible.
Page 21 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
III. REPAIR
Page 22 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
Fuel Injector Installation
▼Fuel Injector bracket installation nut tightening procedure
NOTE:
1. If the fuel injector bracket installation nuts are tightened incorrectly, it could
cause gas leakage or influence the correct injector operation. Also, re-using
non-reusable parts or insufficient cleaning on the sealing surface could cause
gas leakage (injector bore cleaning kit is available).
2. The following procedure is for reference only. Always refer to the workshop
manual for the latest information.
CAUTION:
1. If hands or tools touch the fuel injector terminal, the fuel injector might be
damaged. To prevent this, do not touch the fuel injector terminal.
2. To prevent clogging, do not let foreign matter get into the injection pipe.
MGSS: FUEL INJECTOR
REMOVAL/INSTALLATI
ON [SKYACTIV-D 2.2]
1. Set the fulcrum
a) Temporarily tighten the nut on the engine front side until nut is seated.
b) Tighten the nut on the engine front side to snug torque (2.0 N·m {20 kgf·cm,
18 in·lbf}).
c) Loosen the nut on the engine front side 90 degrees.
2. Apply clamping force
a) Temporarily tighten the nut on the engine rear side until nut is seated.
b) Tighten the nut on the engine rear side to snug torque (2.0 N·m {20 kgf·cm, 18
in·lbf}).
c) Tighten the nut on the engine rear side to the specified angle (PAINT MARKS
and SCRIBED LINES
Page 23 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
are on the nut to guide angle tightening).
Page 24 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
IV. PRE-DELIVERY INSPECTION (PDI)
Page 25 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
Diesel Particulate Filter (DPF) Regeneration
In order to prevent generating white smoke from the exhaust system after delivery,
burn off protective coating by
performing a DPF Regeneration as instructed in the PDI CX-5 VEHICLE RECEIVING
PROCESS form.
Pressing and holding the "TCS OFF" switch starts a compulsory DPF Regeneration only
when no DPF
Regeneration history has been logged into the PCM.
WARNING:
1. High temperature exhaust gas is emitted during DPF regeneration. People near the
vehicle could be seriously burned, or flammable objects could catch fire. Always
perform compulsory DPF regeneration away from people and flammable objects.
2. If large amounts of exhaust gas are inhaled, it may cause carbon monoxide
poisoning. Always perform compulsory DPF regeneration in a well-ventilated place
(avoid using an exhaust air duct indoors and perform compulsory DPF regeneration
in the open air).
CAUTION:
MGSS: DIESEL
PARTICULATE
FILTER
REGENERATION
CONTROL
[SKYACTIV-D
2.2]
MGSS: CX-5
STEP 1 VEHICLE
RECEIVING
PROCESS
1. Perform compulsory DPF regeneration with the hood opened to prevent engine
compartment overheating.
Page 26 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
Service Alert No.: SA-026/19
Last Issued: 06/13/2019
2. If an electrical load is applied, the post injection amount of the fuel injection control
changes and compulsory DPF regeneration cannot be performed normally. Do not
apply an electrical load such as turning on the headlights or the rear window
defroster during compulsory DPF regeneration (A/C cut control is performed during
compulsory DPF regeneration, and A/C is stopped).
3. If there are obstructions such as a wall around the tailpipe, it will obstruct the
exhaust gas passage (airflow), and compulsory DPF regeneration may not be
performed correctly due to the increase in exhaust gas temperature. Always
perform compulsory DPF regeneration with no obstructions around the tailpipe.
4. The temperature in the rear cargo area increases because high temperature exhaust
gas is emitted during DPF regeneration. If an object which can be easily damaged by
heat is in the rear cargo area, such as an electronic device, it could be damaged by
the temperature increase. If compulsory DPF regeneration is performed, do not
place objects such as electronic devices which can be easily damaged by heat in the
rear cargo area.
5. If any DTC other than P2458:00, P2463:00, and P242F:00 is stored, the PCM may
inhibit compulsory DPF regeneration. Before performing compulsory DPF
regeneration, resolve the malfunction and clear the DTC.
Page 27 of 27
CONSUMER NOTICE: The information and instructions in this bulletin are intended for use by skilled technicians. Mazda technicians utilize the proper tools/
equipment and take training to correctly and safely maintain Mazda vehicles. These instructions should not be performed by “do-it-yourselfers.” Customers
should not assume this bulletin applies to their vehicle or that their vehicle will develop the described concern. To determine if the information applies,
customers should contact their nearest authorized Mazda dealership. Mazda North American Operations reserves the right to alter the specifications and
contents of this bulletin without obligation or advance notice. All rights reserved. No part of this bulletin may be reproduced in any form or by any means,
electronic or mechanical---including photocopying and recording and the use of any kind of information storage and retrieval system ---without permission in
writing.
© 2019 Mazda North American Operations, U.S.A.
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
- Formulated for engines with 75,000 miles or more, Valvoline...
- Delivers 20% better wear protection and 15% better sludge...
- Extra detergents safeguard against friction, corrosion and...
- Advanced friction-fighting additives help maximize...
- Provides performance benefits for high mileage, new and...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: SA-026-19
Replacement Service Bulletin Number:
MFR Communication Date: 2019-06-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE AND ENGINE COOLING
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 💯【Conta.ct us for Support Directly】If you met any issues about: Received a registered device/ Language Changing/ Function not Support/ VCI150 Blueto-oth connector malfunction/ Subscription Renewal, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will provide perfect solution for you. ⚠️Note: Autel MK900BT comes with 1-Year Free Software Update, most features will remain active after update subscription expires. 1. For questions regarding updates or need more useful accessories, please conta.ct us via 📞autelsupply @outlook.com🛣️. 2. If the device fails to charge or turn on, please conta.ct us via 📞autelsupply @outlook. com🛣️, we will handle it promptly.
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW MODEL OF MK808S MK900 MX900 MK808BT MX808S】2026 newest Autel MK900BT retains all features of MK808S MX900 MX808S MK808Z MK808Z-BT MK808K-BT, while EXTRA added powerful functions (value 2000+ bucks). The Pro-level Autel MK900BT makes a big leaps: 28+➡40+, 50+➡3000+ Active Tests, 2026 NEW✅CAN FD & DOIP protocols ✅Pre&Post diagnostic report ✅WIFI Print ✅Auto VIN&Auto Scan 2.0 ✅Scan VIN/ License ✅Battery Test (Need purcha.se BT506). If found defect or us.ed, please conta-ct 📞autelsupply @outlook. com📞 get perf-ect solut.ion.
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS906 PRO】Differ from MS906BT MS906 MP808 MK808 MX808 MK808BT only 50 tests, Autel scanner MK900BT escaner automotriz professional offers 3000+ active tests, it can send command to ECUs & monitor actuators operation, quickly locating faulty components. Bidirectional scanning takes your diagnostics to the next level with menu lists 3000+ active tests, such as windows, rear mirrors, sunroof, wipers, fuel injector, coolant fans, radiator fan, AC clutch, coolant pump and more. Note: Functions are not available for all vehicles, please send vehicle VIN to us check compatibility.
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full level-up of OBD2 code reader MaxiCOM MK808S MK808 MK808Z MX808 MK808Z-BT with 28 service, Autel scan tool MK900BT/ MK900-BT offers 40+ maintenance service on 150+ brands 10,000 vehicles from 1996-2025-2026. Hottest Services like: Oil Reset, ABS Bleed, SAS Calibration, Injector Coding, SRS, Throttle Reset, Gearbox Reset, Battery Registration etc. Added 12+ advanced resets: rain slash light sensor reset, HVA.C/ SUS calibration etc. Welcome to send Vehicle Make>Model>Year>VIN>Functions you required to 📞autelsupply @ outlook . com📞 check compatibility.
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE/ AUTO VIN】2026 new release Autel MaxiCOM MK900-BT scan tool embodies all system diagnostic with its 8in display for all vehicles. Like Sna.p-on tools, it can perform ✔Read/Clear Codes✔Displays 5-in-1 Live Data✔Record & Playback Data✔Retrieve Info on all available systems like ABS ECM BCM SRS TCM etc. In addition to Auto VIN technology, Autel MK900BT adds Scan License/ Auto Scan 2.0 to identify vehicle’s VIN/ license, make, year, model, no need manual input; One-click WiFi Printing of Pre&Post comparison diagnostic reports, highlight root causes of problems.
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool supports Reading and Clearing DTCs, DTC Look Up, displaying Live Data, Freeze Frame & I/M Readiness, view vehicle information, etc., to figure out the root cause of the Check Engine Light (CEL) and turn it off, helping you catch any potential issues early and avoid excessive costs from unnecessary repairs.
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with 7 languages (English, French, Spanish, etc.) and various post-1996 OBD II protocol vehicles (Toyota
, Nissan, Honda, Ford, etc.), this OBD II scanner provides accurate and fast diagnosis for worldwide car owners. - 【FOR END USER & DIYERS】 This error code reader AL319 is “plug and play” and comes with an easy interface. Even if you’re not familiar with vehicle repair, you can quickly take control of this obd2 scanner, and get the information you want.
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check engine code reader features a patented One-Click I/M Readiness, TFT color display, built-in speaker, LED Indicator etc. The cable is long enough without being too long and getting in the way. No batteries are needed.
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the date of purchase and lifetime free update are offered by this Automobile OBDII scan tool. Welcome to contact us via Q&A, email, or hotline, and our after-sale-service team for technical support.
- 👨🎓Tips Before Order: 🚩All function are vehicle-specific - send VIN(17 digits)/Make/Model/Year & needed function via 📞auteldirect @ outlook . com📞 to check before order. 🚩Register tool: a) Follow on-screen guide; or b) Register em-ail on Autel we-b, then bind using SN(back of device) + verification code (find in tool settings or con-tact us via above em-ail). MK808BT PRO comes with ✅English, if need Spanish, please s.end device SN to add. ✅1-year war-ranty. ✅$150 worth 1yr fr-ee updates(New users: ignore renewal alerts). ⚠️📢Post-expiry: Most functions remain functional,for exclusions, refer to A+ Tips. ⚠️Fee for FCA AutoAuth Ga.teway(optional): $50/year, charged by AutoAuth,not Autel.
- 【2026 MK808BT PRO: Same as MK900BT, up of MK900 MX900 MK808S MX808S】Why pay more? 2026 MK808BT PRO functions as MK900BT and saves you 100USD. At same c0st, you now get diagnostic 8X faster and sup-port for 150+ models(1996-2026).💡Dramatically Improved: ✔️Faster & Smarter OS: Android 4.4➡ Android 11 ✔️More Services: 28+➡ 40+ ✔️Bidirectional Control: 50+➡ 3,000+ ✔️Enhanced Hardware: 1/32G➡ 4G/64G ✔️2.4GHz➡ 5G Dual WiFi ✔️Working range: 0.9m➡ 10m+ 🔋Battery test is clear on the large 7in display(BT506 required). 🔔Your Autel scanner is shipped brand new. For any issues(used, damaged, incompatible), e-m-a-il 📞auteldirect @ outlook . com📞 for priority resolution.
- 👍【New Next-Level Bidirectional Control, 50➡3000+ Tests, Covers Daily Repairs】Unlike the Autel DS708 DS808 MP808 MK808 and MX808 car diagnostic scanners, which offer only 50 functional tests, the Autel bidirectional scan tool MK808BT PRO is equipped with over 3000 active tests. These tests are widely used on car subsystems to help technicians quickly check if the car's actuators are functioning properly. Such as ABS, windows, rearview mirrors, wipers, sunroofs, fuel injectors, AC clutches, coolant fans, radiator fans, coolant pumps,etc. Tips📢: All functions are vehicle-specific, not universal to all vehicles,pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【28+ Hot Services for 150+ Makes】Autel scan tool MK808BT PRO, upgraded with a BT VCI Mini(valued at 120USD), surpasses the old wired OBDII scanner MK808S MK900, by providing a convenient 33ft wireless working range, offering greater freedom and comfort compared to the 3.3ft cable limit of the MK900 MK808S MX808S car scanner. New features include VIN Check across different modules for comparison and 28+ resets, such as injector coding, ABS autobleed, Oil reset, SAS cali.bration, BMS, throttle relearn, suspension adjustments, etc. ⚠️📢Tips: Service functions are vehicle-specific, not universal to all vehicles, pls send VIN to 📞auteldirect @ outlook . com📞check compatibility before order.
- 👍【All Available Module Diagnosis - OE-Level Scanner】The OE versatile OBDII scan tool MK808BT PRO escaner para autos effectively works with all car systems: ABS, ECM, BCM, SRS, TCM,etc. It identifies vehicles via AutoVIN/manual input/select, like S.nap-on tools, it can ✔read/clear 7000+ DTCs, ✔read ECU info, ✔view 5-in-1 live data, ✔perform active tests, and ✔reset services. ✔Reports can be shared via QR-code and printed, working globally and 21+ multilingual. Supports 150+ US/EU/Asian makes, with ongoing updates from 2024 to 2026. ⚠️Note📢: The AutoVIN function usually works for post-2006 cars, depending on if the vehicle's VIN is stored in the ECU. You can always do manual input/select.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.