NHTSA ID Number: 10160843
Manufacturer Communication Number: V871808_20490393
TSB/Document Date: 2019-06-07
Summary
To update special part number in repair step 26.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
Condition
Applicable Vehicles
Model(s)
Year
Eng. Code
Trans. Code
VIN Range
From
VIN Range To
All Models
2018-2019
All
All
All
All
Revision Table
Instance Number
Published Date
Version Number
Reason For Update
2049039/3
5/28/19
87-18-08
To update special tool
part number in step 26
to 6338/48.
2049039/2
8/1/18
V871808
To include new model
year and to add tool
adaptor 6338/18.
2049039/1
11/9/17
V871713
Original publication.
Debris can be dispersed throughout the refrigerant circuit after A/C component damage. In order to
maintain A/C operating efficiency, it is important to flush the refrigerant circuit after A/C component
repairs.
Note:
This bulletin must be read in its entirety before beginning repair.
Technical Background
In cases where an air conditioning system component (such as a compressor or other system component)
has failed and debris from the compressor or component is circulated throughout the refrigerant circuit,
the refrigerant circuit must be cleaned of any and all debris or damage to the replacement components will
result.
Production Solution
No production change required.
Page 1 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
Service
Tools
Use the MAHLE R1234yf A/C Service Unit VAS581005
and the R1234yf Flush Kit RTI360831040 (Figure 1).
Used for effective refrigerant handling and air conditioning
circuit flushing after air conditioning component failure.
Figure 1. The VAS581005 Air Conditioning
Service System with Flushing Device.
The VAS 6338/1 Adapter Set for Refrigerant Circuits along with an additional adapter VAS 6338/38 for
the expansion valve bypass this kit, contains the adapters necessary to complete a thorough flush
operation of a contaminated circuit.
Elsa contains the technical information for each model regarding the necessary adapter
applications and connections of the servicing station for the flush operation. See Heating,
Ventilation & Air Conditioning >> Refrigerant R1234yf-Servicing >> 00 General Technical Data>>
Refrigerant Circuit removing contaminates>> Refrigerant Circuit, Flushing with Refrigerant
R1234yf in Elsa.
All other refrigerant recovery, evacuation and recharge operations are performed using the usual
procedure specified in Elsa. An operations manual will accompany each servicing station that will
describe operation of the unit.
Page 2 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
Procedure
Front A/C:
1. If an air conditioning component has been diagnosed as the root cause of the failure, and this particular
component has been verified to have released debris through the circuit, continue with the flush
procedure.
2. Switch the power to the servicing station ON and begin by recovering the refrigerant from the system
through the normal service fittings.
Note:
For all compressor replacements it is mandatory to flush the system of all oil in the system. The
replacement compressor comes with a full charge of oil for a complete A/C system.
Tip:
During the entire process avoid interrupting the power to the station. The station's internal memory will
keep a log of all operations and can conveniently be recalled and printed. If the power is interrupted, the
station will lose the memory of the process, and the oil volume recovered, oil volume added, refrigerant
volume recovered, etc. will have to be manually determined.
3. Disconnect the service hoses from the AC service ports of the refrigerant circuit.
The VAS 6338/1 adapters will be used to bypass the following:
Compressor.
Expansion Valve.
Rear AC lines to rear AC unit (If Equipped)
Rear AC unit Expansion Valve (If Equipped)
Note:
For models with receiver drier desiccant cartridge the desiccant cartridge must be removed for the
flushing process.
For vehicles where the receiver drier is located on the condenser and DOES NOT have a remove-able
desiccant cartridge, the receiver drier must be left in the system and flushed through.
After the flush procedure is complete replace the receiver drier or drier cartridge.
4. Installing the R1234yf Flush Kit RTI360831040 flush tank to the Mahle A/C Service Unit VAS581005
5. Remove Receiver Drier. Refer to Elsa Repair Manual.
Note:
For Atlas, the front bumper does not need to be removed as stated in the Elsa repair manual.
When removing front grille ensure ignition is switched OFF and negative battery cable is
disconnected before disconnecting the front distance regulation module.
Page 3 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
6. Remove receiver drier cartridge.
Reinstall cartridge cap with O-ring. (Figure 2)
Figure 2. Location of the Receiver Drier
7. Remove expansion valve and install flush plate
VAS 6338/38. (Figure 3)
Figure 3. Installation of front expansion valve
bypass adaptor VAS 6338/38.
Page 4 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
Note:
(Atlas Only) The rear A/C unit refrigerant lines must
be disconnected and replaced with block off
adaptors VAS 6338/5 and VAS 6338/63 before
performing the front A/C unit flush procedure.
8. (Atlas Only) Disconnect rear refrigerant lines and
install adaptors VAS 6338/5 and VAS 6338/63 as
shown. (Figure 4a, 4b)
Figure 4a. Installation of high side rear A/C Line
connection block adaptor VAS 6338/63
Figure 4b. Installation of Low side rear A/C Line
connection block adaptor VAS 6338/5
Page 5 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
9. Remove A/C Recovery machine high side coupler
from hose.
Install flush adaptor VAS 6338/48 to high side A/C
recovery machine hose. (Figure 5)
Note:
You do not have to remove low side A/C hose
coupler. The low side coupler will be connected to
the flush tank filter adaptor.
Figure 5. A.C hose adaptor 6338/44
10. Disconnect AC compressor hoses from the
compressor.
Install flush adaptor VAS 6338/3 on the high side
compressor hose.
Install flush adaptor VAS 6338/12 on low side
compressor hose. (Figure 6)
Figure 6. Installation of VAS 6338/3 and 6338/12.
Page 6 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
11. Attach high side A/C Recovery machine hose
with VAS 6338/48 fitting to low side compressor
hose adaptor VAS 6338/12. (Figure 7)
Note:
This connection strategy allows for a system flush in
the opposite direction of the normal refrigerant
flow.
Figure 7.
12. Connect the low side A/C machine coupler to
the flush tank filter adaptor. (Figure 8)
Figure 8.
Page 7 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
13. Connect flush tank hose (Yellow) to the high
side compressor hose adaptor VAS 6338/3. (Figure
9)
Figure 9.
14 Perform an extended 3 cycle flush.
15. After the flush process completes remove any adapters that were installed from the VAS 6338/1.
16. (Atlas Only) Proceed to section for cleaning the rear A/C unit. All others models continue to step 17.
17. Install a new Expansion Valve and Receiver Drier Cartridge. Reassemble all refrigerant lines.
18. Print the extended flush log of the job and attach to the repair order.
19. Connect the station in the usual manner through the service fittings and perform the normal
evacuation and refrigerant recharge operations.
Note:
For Atlas a rear A/C unit flush must be performed before vacuum testing and recharging.
Page 8 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
Atlas Rear A/C Unit
The flush process will be repeated for the additional rear air conditioning unit according to the repair
information in Elsa.
20. Lower the exhaust buy removing the rear
exhaust clamp and single rubber hanger. (Figure
10)
Figure 10.
21. Remove the cross bar located in the center
under carriage area. (Figure 11)
Figure 11.
Page 9 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
22. Remove middle heat shield from under
previously removed cross bar to access rear
expansion valve. (Figure 12)
Note:
Replace the clamping washer before reinstalling
the heat shield.
Figure 12.
23. Remove rear expansion valve and install
VAS6338/38 as shown. (Figure 13)
Figure 13. Location of rear air conditioning unit
expansion valve.
Page 10 of 18
© 2019 Volkswagen
Group of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and
other intellectual property rights of Volkswagen
Group of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any
time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, nor may these materials be modified or reposted to other sites, without the prior expressed written permission of the
publisher.
Technical Service Bulletin
87-18-08 - Air Conditioning, Cleaning of the R1234yf Refrigerant
Circuit (U.S. Only)
Transaction No:
2049039/3
Release date:
5/28/2019
24. Connect the VAS 6338/3 and VAS 6338/60 to
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: V871808_20490393
Replacement Service Bulletin Number:
MFR Communication Date: 2019-05-28
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT:APPLIANCE:AIR CONDITIONER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 🎉[OTOFIX D1 Lite, Perfect Cost-effective Diagnostic Tool]: OTOFIX D1 Lite, a newest bidirectional scan tool from OTOFIX company, is a great choice for DIYers and repair shops. 👉This obd2 scanner diagnostic tool packs all practical functions: OE level all systems diagnoses, Bi-Directional Control, 38+ reset services fixing 99% of common problems, support DoIP & CANDF protocols and FCA
AutoAuth, high-end hardware configuration. Worldwide vehicles and 🔥2 Years Free Updating🔥 covered. - 🎉[Bi-Directional Scan Tool, Active Test]: OTOFIX D1 Lite bluetooth obd2 scanner can also command ECUs and monitor the operation of the actuators to track down the problems of certain parts, like windows, sunroof, wipers, fuel pumps, etc., saving repair time & trouble. This makes OTOFIX D1 Lite the most cost-effective bidirectional scan tool.
- 🎉[2026 Newest, 38+ Hot Reset Functions]: Equipped with 38+ reset functions in one, the OTOFIX D1 lite automotive scanner diagnostic tool allows you to troubleshoot 99% of common vehicle problems. You can use this car diagnostic scanner holding enough functions to easily repair common vehicle models in your repair shops. Including Oil Reset, Injector Coding, Throttle, DPF Reset, SCR Reset, Gear Learning, Clutch Learning, Suspension, etc. Note* Reset functions vary by model.
- 🎉[OE Level Full Systems Diagnostics]: Unlike the 2-system and 4-system diagnostic tools, the OTOFIX auto scan tool can complete comprehensive system diagnostics within 5 minutes. It accesses and scans all available onboard systems like for Engine /AT /ABS /EPB /BMS /TPMS /SRS /SAS /Audio System /BCM /Air Conditioning / etc., to read & clear codes, view live data, and check ECU information. Note: Active test is not involved.
- 🎉[Powerful Hardware Configuration]: Designed with a fashion appearance & a 7” touchscreen and a weight of 463g, this OTOFIX D1 Lite OBD2 diagnostic scanner scan tool is convenient for everywhere and easy to use & store. Android9.0 OS and 2+64GB memory enhance multi-task smoothness and diagnostic operation, no more wasting too much time. 5800mAh battery allows hours-lasting use. WiFi & VCI1 also bring faster communication for your diagnostics.
- 🏆【2026 TOP OBD2 Scanner Diagnostic Tool】OTOFIX D1 Lite wireless obd2 scanner has upgraded hardware configuration and car coverage. The newly upgraded D1 Lite with 🔥OS Android 9.0🔥1.5Ghz 4 core high efficiency processor🔥2GB RAM
+64GB ROM large storage🔥5800mAh large battery, more stable and longer lasting diagnostics🔥 38+ Reset🔥action tests🔥full system diagnostic🔥Supports MV105 endoscope🔥21+ Language Supports🔥100000+ vehicle coverage to meet all your daily maintenance needs. - 👍【Bi-Directional Control / Active Test】D1 Lite obd2 scanner has bidirectional control(worth $300+), which is the most beloved feature among mechanic. If your headlights or car windows are broken, going to a repair shop will cost a lot of money. You can use D1 Lite to send execution commands to the ECU module and identify the repair status. Such as ABS, car windows, doors, valves, wipers, headlights, etc., effectively shorten diagnostic time and reduce diagnostic costs.
- 🔥【All Systems Diagnostics, In-depth Checking】This advanced OBD2 Scanner D1 Lite can perform OE-level diagnosis of all systems including engine, transmission, airbag, ABS, ESP, TPMS, gateway, steering, radio, and air conditioning for more than 100 brands. This diagnostic scanner supports essential functions, such as reading ECU version info, reading and clearing fault codes, and reading data streams.With just a simple click, it provides you with accurate and in-depth diagnostics.
- 🏆【38+ Reset Hot Functions】For repair workshops, holding an OTOFIX D1 Lite Auto scanner is a strong advantage over others. Its 38+ maintenance functions provide various solutions for all module repairs, including Oil Reset, TPMS Reset, Injector Coding, Suspension, Throttle Matching, etc., which will usher your repair business to a new pinnacle. Continuously updating will never make the functionality & compatibility out-of-date.
- 🏆【150+ Models, 10000+ Car Coverage & 16 Languages】D1 Lite is a comprehensive car diagnostic scan tool, help you to troubleshoot car issues fast for 95% US, European, Asian auto makes. ✅ With frequent updates and optimizations allow D1 Lite to cover more vehicles to meet your needs. ✅ Multilingual menu allows auto mechanics around the world to use it without language barriers. 🚩Note: Kindly send us the S/N of the device to authorize new language updates before changing the menu language.
- 2026 Newest Wireless Bluetooth Scan Tool D1: OTOFIX D1 Diagnostic scanner is upgraded version with Enhanced Hardwares & Newest Functions, FASTER and SMARTER! ✅Alternative Bluetooth 5.0 +USB connect✅2G+64GB✅Android 9.0 OS✅5G & 2.4 GHz Dual WiFi✅5800mAh battery👍VAG Guided Function👍ECU Online Coding👍CANFD&DOIP👍40+ Services👍Bi-Directional Control👍Full Systems Diagnose👍2 Years Free Update👍150+ Vehicle Coverage🎁Contact to get gift: otofixaftersales-amz@ outlook.com
- ECU Coding to Unlock the Hidden Features: OTOFIX D1 obd2 scanner diagnostic tool newly adds ECU Coding which can Online Coding(ONLY for VW
/Au.di/Sk0da), Variant Coding/Offline Programming, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: halogen fog lamps retrofitted with xenon fog lamps, different capacity battery retrofit, disbale auto start-stop, sunroof initialization, injector calibration, etc. PS: Coding functions vary by model&year. - Full Bidirectional Control for Active Car Tests: The D1 OTOFIX scanner also offers bi-directional control, allowing you to perform powerful active tests on car subsystems. This means that you can check the working status and functionality of open & close solenoids, energize injectors, turn cooling fan on & off, and more, all from the device itself.🚩The D1 bi-directional obd2 scanner can quickly help you to check if a system or component goes well,Improving 200% Efficiency.**Note that Active Tests available depend on the make/model/year of your car.
- 40+ Popular Maintenance Functions: OTOFIX D1 obd scanner for car performs 40+ hot services, including Oil Reset, EPB, TPMS, BMS, E.GR, G.PF, D.PF, SAS Calibration, ABS Bleeding, Injector Coding, Gearbox Match, Suspension, Crankshaft Relearn, Power Balance, etc., still growing. Great choice for DIYers, technician, repair shop. 🚩Get MORE special functions from "Car Brand>System>Service". Check compatibility before purchase via 📧 otofixaftersales-amz@ outlook.com.
- OE-Level All Systems Diagnostic + One-Click AutoVIN & AutoSCAN: OTOFIX D1 scanner automotriz gives you the ability to troubleshoot entire car systems including engion system,transmission system,body system,chassis,etc. 🚩One of the standout features of the D1 obd2 scanner diagnostic tool is the one-click AutoVIN & AutoScan function. This feature allows you to quickly and easily scan all diagnosable ECUs with just one click, and identify any problems hidden in your vehicle's systems.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.




