2019

A3 Sedan & Cabriolet/S3/RS 3
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Verify inflatable repair kit and compressor are present (A3
Cabriolet quattro and RS 3 only)

 Verify Audi Phone Box Customer Registration form is present in car and fill out “Serial Number” field. Check Elsa
“Vehicle Information” Section or location sticker on car.
See TSB 2051720

 Verify temporary inflatable spare tire is present (A3 Sedan,
S3, and A3 Cabriolet FWD only)*
 Check battery clamps for proper torque*

 Perform any open campaigns*
 Perform diagnostic work*

Interior
 Verify operation of all seat belts and latches

Exterior
 Check all key buttons and features*
 Inspect the outer door seals at all four doors and clean any
visible adhesive using D 002 000 A2 Adhesive Remover or
Acetone
 Inspect exterior for damage, dings, dents and surface
scratches
Lighting and Windshield
 Test exterior lighting functions
 Test windshield washers (and headlight washers on S3/RS 3)*
 Install wiper blades
Trunk Inspection
 Verify trunk is operational

 Check operation of window, lock, and seat controls*
 Inspect mirrors for proper operation*
 Check rear view mirror operation*
 Verify operation of all interior lights
 Verify operation of heated seats
 Verify operation of manual folding 2nd row
 Verify proper operation of climate control*
 Inspect operation of all power outlets*
 Check panoramic sunroof and sunshade operation (Sedan
only)*
 Verify the glove compartment opens and closes properly
 Verify operation of front Passenger Occupant Detection
System

 Verify operation of emergency release handle

Settings

 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Verify operation of MMI® touch (if equipped)

 Verify tool kit is installed securely in luggage compartment
Effective 4-29-2019-US
Version 1.4

 Set time source setting to “GPS” (if equipped) and set auto
daylight savings time to “on” *
PRE-DELIVERY INSPECTION (PDI) | 1

2019

A3 Sedan & Cabriolet/S3/RS 3
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance (continued)

 Set Time to “Automatic setting” and “Automatic time zone”

 Test drive vehicle applying brakes several times*

 Verify and set language and measurement units*

 Check steering/tire alignment

 Verify Speech Dialog System is operating (if equipped)*

 Check for squeaks, rattles and wind noise

 Set “Entertain. Fad.” in parking aid to an audible level (if
equipped)*

 Calibrate rear view mirror*
 Verify quality of radio reception in AM/FM/SiriusXM® bands

 Set dealership location in navigation (if equipped)*
 Turn off Manual Speed Warning*
Media / Radio / SAT
 Verify operation of all USB ports

Driver Assistance
 Verify cruise control/ACC functionality (if equipped)
 Verify Audi side assist functionality (if equipped)

 Verify operation of aux. input

 Verify Audi side assist with with rear cross traffic assist (if
equipped)

 Verify operation of CD/DVD player (if equipped)

 Verify Audi active lane assist functionality (if equipped)

 Insert SD card and test function of slots

 Verify operation of Audi parking system (if equipped)*

 Program the presets to local stations

 Verify operation of High beam assist (if equipped)

 Verify HD Radio is turned “off”*

 Activate navigation and follow directions back to dealership
(if equipped)

Audi connect® (USA ONLY) (if equipped)
 Turn on the Wi-Fi® hotspot (if equipped)*

Cabriolet Functionality

 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*

 Test operation of power folding top*
 Verify convertible top manual closing tools are present

 Enable Google Earth view for navigation (if equipped)*
Post-Road Test Inspection
On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)
 Check steering, boots, brake system, hoses, tires and wheels
for damage
 Check underside of vehicle for fluid leaks and loose components
 Inspect wheel bolts for proper torque*

 Interrogate fault memory and upload diagnostic log to GFF
Paperless Server
 Select reset interval in the MIB Service and Checks menu if it
is not displaying correct 10K and 20K intervals
 Check service interval and verify correct interval is displayed
 Check engine oil level*
 Check all fluid levels and top off if necessary

 Install wheel locks (if equipped)

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Install wheel bolt covers and center caps as supplied*

 Apply 30 Day Inventory Maintenance Sticker**

 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*

 Install showroom charger to ensure battery remains
charged at all times**

Driving Performance

 Must fuel with 91 Octane or higher (S3, RS 3)

 Check horn operation
 Verify hold and release of electronic parking brake
 Verify engine Start-Stop System functionality*
 Verify engine performance and acceleration*
 Verify transmission operation, including shift paddles (if
equipped)
Effective 4-29-2019-US
Version 1.4

PRE-DELIVERY INSPECTION (PDI) | 2

2019

A3 Sedan & Cabriolet/S3/RS 3
Audi Pre-Delivery Inspection

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 4-29-2019-US
Version 1.4

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 3