2019

A5/S5/RS 5
Audi Pre-Delivery Inspection
Stock No.

Dealer Number

R.O. No.

VIN

Road test mileage out

Road test mileage in

Reminders
 All items must be completed prior to customer delivery by a certified Audi technician
 Audi recommends using an Audi approved battery charger to prevent excessive battery discharge during inspection
 ALL PDI function tests must be run in Guided Fault Finding (GFF) using PDI Total Function Test Plan only. Do NOT use Guided
Functions for any PDI related test as these will not be uploaded to the Paperless Server. Refer to the Special functions tab of ODIS
Diagnosis for using GFF for PDI function tests
 It is advised to start ODIS with the engine running to enable all 5F Test Plans in GFF
 For items marked with *, please refer to the PDI Technician Reference Document posted on ServiceNet for additional information
 For items marked with **, follow instructions for stock inventory vehicle

Vehicle Preparation

Trunk Inspection (continued)

 Check Elsa for open campaigns and updates

 Set spare tire pressure*

 Perform any open campaigns*

 Check battery clamps for proper torque*

 Run Total PDI Test*
If vehicle doesn’t deactivate Vehicle Transport Mode or Flight
Mode, please follow the steps below

Interior
 Verify operation of all seat belts and latches

 Deactivate Flight Mode for Telematics Control Unit (ConBox)
using Self-Diagnosis Adaptation*
Note: The VAS 6154 diagnostic head is required. See Technician Reference Document or TSB 2052299

 Check operation of window, lock, and seat controls*

 Set adaption channel to enable CD Ripping using Guided
Functions (if equipped with NAV)*

 Verify operation of all interior lights

 Inspect mirrors for proper operation*
 Check rear view mirror operation*

 Set service reminder*

 Verify SOS button is green and Roadside assistance button
LED will remain off (if equipped). Reference TSB 2052299 if
issues occur

Exterior

 Verify operation heated/ventilated seats (if equipped)

 Check all key buttons and features*

 Verify proper operation of climate control*

 Inspect exterior for damage, dings, dents and surface
scratches

 Inspect operation of all power outlets*

Lighting and Windshield
 Test exterior lighting functions

 Verify the glove compartment opens and closes properly
 Check panoramic sunroof and sunshade operation*
 Verify operation of front Passenger Occupant Detection
System

 Test front washers (and headlight washers if equipped)*
Settings
Trunk Inspection

 Verify operation of MMI® touch screen (if equipped)

 Verify trunk is operational

 Set Time source setting to “GPS” and set Auto daylight savings time to “on.”*

 Verify operation of emergency release handle
 Install wheel bolt cover removal tool from PDI kit into trunk
tool kit*

 Set Time to “Automatic setting” and “Automatic time zone”

 Verify tool kit is installed securely in luggage compartment

 Verify Speech Dialog System is operating*

Effective 1-14-2019-US
Version 1.2

 Verify and set language and measurement units*

PRE-DELIVERY INSPECTION (PDI) | 1

2019

A5/S5/RS 5
Audi Pre-Delivery Inspection
Settings (continued)

Driving Performance (continued)

 Set “Entertain. Fad.” in Parking aid to an audible level*
 Set “Music volume while parking” to medium*

 Verify transmission operation, including shift paddles (if
equipped)

 Set dealership location in navigation (if equipped)*

 Test drive vehicle applying brakes several times*

 Turn off Manual Speed Warning (if equipped)*

 Check steering/tire alignment
 Check for squeaks, rattles and wind noise

Media / Radio / SAT

 Calibrate rear view mirror*

 Verify operation of aux. input (if equipped)

 Verify quality of radio reception in AM/FM/SiriusXM® bands

 Verify operation of CD/DVD player (if equipped)
 Insert SD card and test function of all slots

Driver Assistance

 Verify HD Radio is turned “off”*

 Verify cruise control/ACC with Stop & Go functionality (if
equipped)

Audi connect® (USA ONLY) (if equipped)

 Verify Audi side assist functionality (if equipped)

 Turn on the Wi-Fi® hotspot (if equipped)*

 Verify Audi active lane assist functionality (if equipped)

 Check Wi-Fi® hotspot visibility. No data available at PDI (if
equipped)*

 Verify operation of parking system (if equipped)*
 Verify all vehicle Head-up display functionality (if equipped)*

 Enable Google Earth view for navigation (if equipped)*

 Activate NAV and follow directions back to dealership (if
equipped)

On-Hoist Inspection
 Remove transport suspension blocks (follow ELSA instruction)

Convertible Functionality (if equipped)

 Check steering, boots, brake system, hoses, tires and wheels
for damage

 Test operation of power folding top*

 Check underside of vehicle for fluid leaks and loose components

 Verify convertible top manual closing tools are present

 Install wheel locks (if equipped)

Post-Road Test Inspection

 Install wheel bolt covers and center caps as supplied*

 Interrogate fault memory and upload Diagnostic Log to GFF
Paperless Server

 Inspect wheel bolts for proper torque*
 Set and store tire pressures for either sold vehicle OR stock
inventory vehicle*
Driving Performance

 Check Service Interval and verify correct interval is displayed
 Check engine oil level*
 Check all fluid levels and top off if necessary

 Check horn operation

 Ensure the yellow tire pressure tag is installed on the steering wheel

 Verify hold and release of electronic parking brake

 Apply 30 Day Inventory Maintenance Sticker**

 Verify engine Start-Stop System functionality*

 Install showroom charger to ensure battery remains
charged at all times**

 Verify engine performance and acceleration*

Technician
I certify that all operations have been completed and this vehicle has been prepared in accordance with Audi Procedures and
Quality Standards, and has met the standards for Perfect Delivery.

Technician Signature

Effective 1-14-2019-US
Version 1.2

Last 8 of VIN

Completion Date

PRE-DELIVERY INSPECTION (PDI) | 2