NHTSA ID Number: 10153662
Manufacturer Communication Number: IK0800550
TSB/Document Date: 2019-02-25
Summary
Multi Module Programming Information for In-Cab Modules
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 1 of 18
Countries:
CANADA, UNITED STATES,
MEXICO
Document
ID:
IK0800550
Availability:
ISIS, FleetISIS, IsSIR
Revision:
7
Major System:
ELECTRICAL SYSTEM
Created:
9/6/2017
Current
Language:
English
Last
Modified:
12/14/2018
Other
Languages:
NONE
Author:
Charles
Schroeder
Viewed:
3315
Less Info
Coding Information
Hide Details
Copy Link
Copy Relative Link
Bookmark
Add to Favorites
Provide Feedback
View My Bookmarks
Helpful
Not Helpful
18
1
Title : Multi Module Programming Information for In-Cab Modules
Applies To : LoneStar, LT, RH, HV, MV
Change Log
Please refer to the change log text box below for recent changes to this article:
12/14/2018 ‐ Corrected Door Pod Software to 1.90 for Cummins
interaction. Added related iKNow articles in the
Description section of the article. Added note for required access to program.
10/11/2018 ‐ Added note under repair instructions to reference IK0800541 if the EGC has been replaced to verify
warning lights and odometer are properly programmed.
06/12/2018 ‐ Added Door Pods as programmable modules.
Description
This document will guide the user through Module Kernel Updating using International Diamond Logic® Builder
Software (DLB).
This applies to all vehicles equipped with feature code 0508097 ‐ ELEC SYS MUX COMMON ARCHITECTURE for Electrical
Common Architecture System
Progamming with DLB requires Level II Fleet or Level II Dealer at a minimum
Models that utilize multi
module programming:
•
•
•
•
•
Modules that can be updated with
DLB using 'Update All':
•
•
•
•
•
•
•
LT
RH
HV
MV
LoneStar
Body Control Module (BCM)
Instrument Cluster
Lighting Control Module
Six Position Switch‐Packs
Stalk Shifter
Front HVAC Control Module
Door Pods
Modules that can be updated with
DLB individually:
•
•
•
•
•
•
•
Body Control Module (BCM)
Instrument Cluster
Lighting Control Module
Six Position Switch‐Packs
Stalk Shifter
Front HVAC Control Module
Door Pods
Important Software Versions
4.02.01 (Premium)
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Instrument
Cluster
Door Pods
4.01.03 (Base)
1.90
Page 2 of 18
Software 4.02.01 (Premium), 4.01.03 (Base) or above will
resolve complaint of Trailer ABS light performing bulb check at
key on, when an ABS equipped trailer is connected.
Corrects communication issue that would cause Cummins ECM
Parameters to default during an ECM calibration update.
Related iKNow Articles
• IK0800580 ‐ Heated Mirror Timer Programmable Parameter
• IK2600236 ‐ Cummins ECM Programming Procedure for LT, HV, MV, LoneStar
Symptoms
Diagnostic Trouble Codes & Dashboard Indicator Lights:
DTC/Light
Description
No Faults or Warning Lights
Customer Observations or Concerns:
• Not Applicable
Special Tools / Software
Tool Description
International® Diamond Logic® Builder (DLB)
Tool Number
Comments
Instructions
EZ‐Tech® Software
Diagnostic Steps
Not Applicable
Repair Steps
The information below will guide you through updating multiple modules using DLB software. You will need to ensure
the DLB Version you are using is updated and current. You can perform a multi‐module update, or program modules
individually as needed.
If the Electronic Gauge Cluster has been replaced, please follow IK0800541 ‐ Electronic Gauge Cluster Warning Lights
in LT and RH After Cluster Replacement to verify the warning lights and the odometer are properly programmed in
the cluster.
Repair Steps Table of Contents
•
Verify DLB Version
• Update Multiple Modules
• Update Single Module
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 3 of 18
Checking to ensure Diamond Logic® Builder has updated to the most current version
1. DLB should automatically update when it is opened, and the EZ‐Tech® is connected to the internet
◦ It is possible your companies' internet may prevent DLB from updating
◦ Open the DLB Change Log and verify your DLB version
Figure 1 ‐ Navigate to DLB Change Log
Help Menu ‐ Click on Change Log
You can also access the DLB Change Log by Clicking Here
2. Access the Help Menu ‐ Click on About Diamond Logic® Builder
3. A pop‐up box will appear and display the DLB information
◦ Reference the Version information that is displayed
Figure 2 ‐ About Diamond Logic Builder ‐ Check Version
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 4 of 18
1. Help Menu ‐ Click on About Diamond Logic® Builder
2. Version Information
4. Your Version of DLB should match the most recent Version displayed on the DLB Change Log
Figure 3 ‐ DLB Change Log Example
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 5 of 18
◦ Example of DLB Change Log Website ‐ Click Here to access website
5. Connect to the Body Control Module (BCM) using DLB with the Key OFF
◦ You may need to select the com link you are using from the Tools menu
( Return to Repair Steps Table of Contents )
Program multiple modules using the 'Program All' option
1. Prior to connecting to the vehicle, DELETE the VIN from DLB if you've ever been connected to the vehicle you're
preparing to program
◦ This step needs to be performed PRIOR to connecting to the vehicle
Figure 4 ‐ Delete Vehicle from Diamond Logic® Builder (DLB)
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 6 of 18
2. Connect to the Body Control Module (BCM) using DLB with the Key OFF
◦ You may need to select the com link you are using from the Tools menu
Figure 5 ‐ Tools Menu ‐ Select Com Link
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 7 of 18
1. Select the appropriate Com Link
Notice no VIN is displayed. The VIN for the vehicle you are preparing to program should have been deleted
prior to connecting
3. Turn the Key ON
4. Get Data from the Programmable Modules
◦ This will ensure the information displayed in DLB is accurate
Figure 6 ‐ Get Module Data (All Programmable Modules)
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 8 of 18
1. Get Data drop down Icon
• Click on 'Get Data'
• This will read the current data from all modules that can be programmed using DLB
5. Update All Software
◦ Any available software will be applied to the programmable modules
Figure 7 ‐ Update Software (All Programmable Modules)
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 9 of 18
1. Right Click on the Title Row and select Kernel if it is not already selected
2. This will show the Kernel version for the programmable modules
3. Update Software drop down Icon
• Select Update All Software
• This will update the Kernel version for DLB Programmable Modules if available
6. Program ‐ This will program all modules that were updated in the previous step
Figure 8 ‐ Program All Programmable Modules
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 10 of 18
1. Program drop down Icon
• This will program all modules that have newer software available and could include:
• Body Control Module
• Instrument Cluster
• Lighting Control Module
• Six Position Switch‐Packs
• Stalk Shifter
• Front HVAC Control Module
• Programming could take up to 45 minutes depending on how many modules are being programmed
Ensure the laptop is plugged in and the vehicle is connected to a smart charger during programming to
maintain proper voltage
7. After all programming is complete, place DLB in Diagnose Mode
8. Navigate to the Fault Tab
9. Clear any faults that may have occurred during the programming process
Figure 9 ‐ Clear Fault Codes
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 11 of 18
1. Place DLB in Diagnose Mode
2. Clear any Fault Codes
( Return to Repair Steps Table of Contents )
Program a Single Module Individually
1. Prior to connecting to the vehicle, DELETE the VIN from DLB if you've ever been connected to the vehicle you're
preparing to program
◦ This step needs to be performed PRIOR to connecting to the vehicle
Figure 10 ‐ Delete Vehicle from Diamond Logic® Builder (DLB)
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 12 of 18
2. Connect to the Body Control Module (BCM) using DLB with the Key OFF
◦ You may need to select the com link you are using from the Tools menu
Figure 11 ‐ Tools Menu ‐ Select Com Link
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 13 of 18
1. Select the appropriate Com Link
Notice no VIN is displayed. The VIN for the vehicle you are preparing to program should have been deleted
prior to connecting
3. Turn the Key ON
4. Get Data from the module you want to update
◦ This will ensure the information displayed in DLB is accurate
Figure 12 ‐ Get Module Data for a Single Module
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 14 of 18
1. Right Click on the Module you are going to Program
2. Click on Get Module Data
5. Update Software for the Module you are programming
Figure 13 ‐ Update Module for a Single Module
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 15 of 18
1. Right Click on the Module you are updating
2. Click on Update Module
3. The Kernel version will update if newer software is available
6. Program the Single Module you have updated
◦ Only the single module will program
Figure 14 ‐ Program Single Module
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 16 of 18
1. Right Click on the Module you are updating
2. Click on Program Module
◾ Only the selected Module will be programmed
7. After the Module has programmed, place DLB in Diagnose Mode
8. Navigate to the Fault Tab
9. Clear any faults that may have occurred during the programming process
Figure 15 ‐ Clear Fault Codes
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 17 of 18
1. Place DLB in Diagnose Mode
2. Clear any Fault Codes
( Return to Repair Steps Table of Contents )
Warranty Information
Warranty Claim Coding:
Refer to the Warranty Coding Manual for Group and Noun Codes.
Standard Repair Time(s):
Refer to the SRT Manual for Repair Times
Other Resources
Master Service Information Site
Hide Details
Feedback Information
Viewed:
3314
Helpful:
18
Not Helpful: 1
No Feedback Found
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
IK0800550 - Multi Module Programming Information for In-Cab Modules
Page 18 of 18
Copyright © 2019 Navistar, Inc.
https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: IK0800550
Replacement Service Bulletin Number:
MFR Communication Date: 2018-12-14
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS
, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations
- 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
Last update on 2026-06-30 / Affiliate links / Images from Amazon Product Advertising API
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
Last update on 2026-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.