IK0800017 - Programing New Key Fobs for HPVs ProStar or LoneStar

Page 1 of 4

Countries:

BAHAMAS, BOLIVIA,
BELIZE, CANADA, CHILE,
TAIWAN, COLOMBIA,
COSTA RICA, DOMINICAN
REPUBLIC, ECUADOR, EL
SALVADOR, TRINIDAD
AND TOBAGO, UNITED
Document
STATES, URUGUAY,
IK0800017
VENEZUELA, MEXICO,
ID:
ARUBA, NICARAGUA,
PERU, PUERTO RICO,
Curaçao, GUAM,
GUATEMALA, GUYANA,
HAITI, HONDURAS,
JAMAICA, KOREA, SOUTH
KOREA, PANAMA

Availability:

ISIS, FleetISIS, Body
Builder, IsSIR

Revision: 8

Major
System:

ELECTRICAL SYSTEM

Created:

11/14/2006

Current
English
Language:

Last
12/18/2018
Modified:

Other
Français, Español,
Languages:

Author:

Viewed:

Charles
Schroeder

9395
Less Info

Coding Information

Hide Details

Copy Link

Copy Relative
Link

Bookmark

Add to
Favorites

Print

Provide
Feedback

Helpful

Not Helpful

1560

1113

View My
Bookmarks

Title : Programing New Key Fobs for HPVs ProStar or LoneStar
Applies To : All HPV's, ProStar or LoneStar with Remote Keyless Entry

Change Log
Please refer to the change log text box below for recent changes to this article:
12/18/2018 ‐ Updated part numbers based on dealer feedback. Updated formatting
04/16/2018 ‐ Author updated for feedback purposes





Description

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019

IK0800017 - Programing New Key Fobs for HPVs ProStar or LoneStar

Page 2 of 4

The International ® Keyless Entry System uses electronic door pods in the driver and passenger
side doors which also operate the power door locks and the power windows. If equipped with
RKE, the memory in the receiver (front passenger door pod) learns the transmitter codes from
the key fobs (transmitters) and only recognizes those which it has learned in the programming
process. Each vehicle's passenger side door pod has the ability to learn up to six transmitter
codes allowing the vehicle to be accessed by six different key fobs. Each key fob has a unique
code which can be learned by any number of RKE equipped vehicles.

Symptoms
Diagnostic Trouble Codes & Dashboard Indicator Lights:
DTC/Light

Description

No Faults or Warning Lights
Customer Observations or Concerns:
• Key fob will not lock or unlock the doors

Special Tools / Software
Tool Description

Tool Number

Comments

Instructions

Not Applicable

Service Parts Information
Kit Description

Part Number

Quantity
Required

CONTROL, REMOTE KEYLESS ENTRY

3544938C2

1‐6

CONTROL, ELECTRONIC, POD
PASSENGER

6112325C2

1

Notes
Transmitter
(Key Fob)
Passenger Door Pod
(with RKE)

Diagnostic Steps

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019

IK0800017 - Programing New Key Fobs for HPVs ProStar or LoneStar

Page 3 of 4

Not Applicable

Repair Step(s)
Before the transmitter can be used for the first time, it has to be "learned" by the receiver. Up
to 6 transmitters with different identification codes can be learned by a single RKE Door Pod.
These procedures are designed for manual learning/erasing operations on a complete vehicle.
They can be used for learning replacement transmitters, for using up to six transmitters for
accessing the same vehicle, or for accessing any number of vehicles using the same
transmitter. If RKE is being added to the vehicle, additional programming of the BCM / ESC is
required to operate the horn, panic, and dome light functions with RKE.

If you still can't get the key fob to program after following the instructions below, then you
need to check the part number of the passenger door pod to make sure that it is correct

Erasing All Learned Transmitters
1. Turn key to ACC or ON position.
2. On the driver pod; depress and hold the Window Up, Window Down, and Unlock buttons.
3. While holding the buttons down in step two depress and hold the Lock button for at least
5 seconds.
4. At the end of 5 seconds all learned transmitters will be erased from the passenger pod
with RKE.

The learning procedure cannot be performed during the same Ignition cycle as the "Erasing
All Learned Transmitters" procedure. If necessary, the erase procedure should be completed
before this procedure is started

Learning a Transmitter
The following steps must be used in order to “Learn” a transmitter (key fob) to an RKE door
pod:
The learning process must be repeated for each transmitter (key fob) to be learned.
1. Turn key to ACC or ON position.
2. On passenger pod with RKE; depress and hold the Window Up, Window Down, and
Unlock buttons.
3. While holding the buttons down in step two depress and hold the Lock button for at least
5 seconds.

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019

IK0800017 - Programing New Key Fobs for HPVs ProStar or LoneStar

Page 4 of 4

4. At the end of 5 seconds, the RKE pod will enter “Learn Transmitter” mode and stay there
for exactly 10 seconds
◦ The door pod buttons may be released
5. During this 10 second period the Transmitter (key fob) should be keyed at least twice.

After the transmitter is learned the next keying of the new transmitter will perform the
indicated function. It is recommended that the transmitter be successively keyed until the
selected key's function is actually performed; i.e., pressing the Lock Button on the
transmitter two times should learn its code, on the third push it should lock the door and
momentarily beep the city horn. This is a good way to quickly confirm the success of the
learning.

Warranty Information
Warranty Claim Coding:
Refer to the Warranty Coding Manual for Group and Noun Codes.
Standard Repair Time(s):
Refer to the SRT Manual for Repair Times

Other Resources
Master Service Information Site
Hide Details

Feedback Information
Viewed:

9394

Helpful:

1560

Not Helpful: 1113
No Feedback Found

Copyright © 2019 Navistar, Inc.

https://evalue.internationaldelivers.com/service_kb/DocTool/ArticleViewer.aspx?ControlID... 1/3/2019