NHTSA ID Number: 10152509
Manufacturer Communication Number: NTB10-029e
TSB/Document Date: 2019-01-07
Summary
NISSAN
; VIBRATION AND/OR NOISE WHEN MAKING LOW SPEED TURNS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Classification:
Reference:
RA09-004e
Date:
NTB10-029e
November 12, 2018
NISSAN; VIBRATION AND/OR NOISE WHEN MAKING
LOW SPEED TURNS
This bulletin has been amended. See AMENDMENT HISTORY on the last page.
Please discard previous versions of this bulletin.
APPLIED VEHICLES: 2003-2014 Murano (Z50, Z51)
2011-2014 Murano CrossCabriolet (Z51)
2008-2013 Rogue (S35)
2014-2018 Rogue (T32)
2014-2015 Rogue Select (S35)
2017-2018 Rogue Sport (J11)
2017-2018 Rogue Hybrid (T32)
2013-2019 Pathfinder (R52)
2014-2015 Pathfinder Hybrid (R52)
AWD/4WD ONLY
IF YOU CONFIRM
There is a vibration or judder feeling from the rear of the vehicle during the following
conditions:
And
when making turns
on dry roads
at low speeds (under 40 MPH)
The above vibration does not occur if the Electric Controlled Coupling is electrically
disconnected.
NOTE: In some cases, electrically disconnecting the Electric Controlled Coupling
may not eliminate the vibration as described above. In these cases, further confirm
the incident by removing the rear propeller shaft and retest. If the vibration
does not occur with the rear propeller shaft removed, the incident is confirmed.
IMPORTANT: Tire size, brand or tread pattern mismatches can cause similar symptoms.
To avoid tire related mismatch vibration, it is recommended that when tires need to be
replaced, all tires are replaced at the same time with tires of the proper size, same brand
and pattern.
See ACTION on page 2.
Nissan Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are
properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job
properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO
NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle.
1/8
ACTION
Replace the Electric Controlled Coupling for the rear final drive.
DO NOT replace the entire Rear Final Drive assembly for this incident, if it should
occur.
DO NOT remove the Rear Final Drive assembly for this procedure. The Electric
Controlled Coupling can be replaced with the Rear Final Drive in the vehicle.
Refer to the Electronic Service Manual (ESM) for removal and installation
information.
For 2003-2007 Murano: Section RFD – Rear Final Drive.
For all other Applied Vehicles: TRANSMISSION & DRIVELINE > DRIVELINE >
REAR FINAL DRIVE > REMOVAL AND INSTALLATION > ELECTRIC
CONTROLLED COUPLING > Removal and Installation
UNIT CHARACTERISTICS WRITING
Pathfinder, Pathfinder Hybrid, Rogue Sport, Rogue Hybrid, and 2014-2018 Rogue
(T32) only
Performing “Unit Characteristics Writing” of the Electric Controlled Coupling with
CONSULT-III plus is required when replacing the Electric Controlled Coupling.
Refer to the ESM: TRANSMISSION & DRIVELINE > DRIVELINE > TRANSFER >
BASIC INSPECTION > UNIT CHARACTERISTICS WRITING > Work Procedure
2/8
NTB10-029e
PARTS INFORMATION
2003-2007 Murano
DESCRIPTION
CPLG ASSY-ELEC
(Electric Controlled Coupling)
CENTER OIL SEAL
PART #
QUANTITY
38761-JP20B
1
38189-CA01A
1
38189-CA000
1
COMPANION FLANGE LOCK NUT
38216-U301A
1
BOLT (PROPELLER SHAFT)
NUT (PROPELLER SHAFT CENTER
BEARING)
NUT (PROPELLER SHAFT)
37120-JD01A
8
01223-N0021
2
37171-7S00A
8
3 BOND GSKT MKR-RTV
999MP-1217FPP
(2) (3)
2009-2014 Murano
DESCRIPTION
CPLG ASSY-ELEC
(Electric Controlled Coupling)
CENTER OIL SEAL
PART #
QUANTITY
38761-JP20B
1
(1)
1
38189-CA000
1
COMPANION FLANGE LOCK NUT
38216-U301A
1
BOLT (PROPELLER SHAFT)
NUT (PROPELLER SHAFT CENTER
BEARING)
37120-JD00B
4
01223-N0021
2
BOLT (PROPELLER SHAFT)
37120-JD01A
4
NUT (PROPELLER SHAFT)
3 BOND GSKT MKR-RTV
37171-7S00A
999MP-1217FPP
4
(2) (3)
(1) Use the VIN and the electronic parts catalog (FAST or equivalent) to look up the part
number for the vehicle you are working on.
(2) This product is considered a shop supply; do not include it on your warranty claim.
(3) Order this item through the Nissan Maintenance Advantage program: Phone 877-NISNMA1 (877-647-6621). Website order via link on the dealer portal: www.NNAnet.com
and click on the “Maintenance Advantage-Tire/Battery/Chemical” link.
3/8
NTB10-029e
2008-2013 Rogue and 2014-2015 Rogue Select
DESCRIPTION
CPLG ASSY-ELEC
(Electric Controlled Coupling)
CENTER OIL SEAL
PART #
QUANTITY
38761-JG20B
1
(1)
1
38189-CA000
1
COMPANION FLANGE LOCK NUT
38216-U301A
1
BOLT (PROPELLER SHAFT)
NUT (PROPELLER SHAFT CENTER
BEARING)
BOLT (PROPELLER SHAFT)
37120-JD00B
4
01223-N0021
2
37120-JD01A
4
NUT (PROPELLER SHAFT)
37171-7S00A
4
3 BOND GSKT MKR-RTV
999MP-1217FPP
(2) (3)
2014-2018 Rogue (T32)
DESCRIPTION
CPLG ASSY-ELEC
(Electric Controlled Coupling assembly)
BREATHER
PART #
QUANTITY
38761-4BF0A
1
38356-8H50A
1
38189-8H51A
1
STUD (REAR COUPLING)
38764-4BF0A
4
BOLT (PROPELLER SHAFT)
NUT (PROPELLER SHAFT CENTER
BEARING)
NUT (PROPELLER SHAFT)
37120-JD00B
8
01223-N0021
2
37171-7S00A
4
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: NTB10-029e
Replacement Service Bulletin Number:
MFR Communication Date: 2018-11-12
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: SUSPENSION
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Newly Added in 2026: 7 Reset Functions] The 2026 new version of the OBD2 scanner diagnostic tool CRP123X V3.0 Elite has new special functions for F.REE: Throttle Ad.aptation, Oil/SAS/BMS/Brake Reset, D-P.F Re.generation and ABS Service. Before you visit a mechanic, launch obd2 Scanner CRP123X Elite can perform a more in-depth diagnosis of the car system and provide accurate data within minutes. What's more, the list of compatible models has been expanded. Upgrading frequency is regular, occurring monthly even weekly.
- 🔥[FCA AutoAuth + CAN FD & DoIP] As an upgraded version of the LAUNCH CRP123X/CRP129X, FOXWELL NT614, and ANCEL FX2000, The Newest LAUNCH CRP123X V3.0 auto diagnostic scanner supports the following new protocols: CAN-FD for 2020 and newer G.M and Chrysler
models, as well as DoIP for V.olvo, Land Rover/Jaguar, and B.MW F/G chassis. With integrated AutoAuth, you can diagnose 2018 and newer FCA cars equipped with S.GW. Note: CAN-FD and DoIP protocols require an additional obd2 cable. *Menus vary by make, model, and year of gasoline or diesel engine vehicle. Email us your VIN data. - 🔥[No extra software fee. Works on 90 vehicle brands.] Most OBD2 scanners work with vehicles manufactured after 2001. However, the LUNCH OBD2 scanner is compatible with OBDII-equipped vehicles built after 1996 and works with more than 90 vehicle brands. One-click lifetime updates over WIFI 2.4&5.0Ghz keep the car software current and ensure constant coverage additions, diagnose vehicles from 1996 to 2026 with a massive global database. Android 8.1 ensures lightning-fast boot-up and processing.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X V3.0 to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership. Generate vehicle health reports with one click and share them via email over Wi-Fi to help avoid blind maintenance. And will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（or 4-in-1 merged waveform graph),you can save, share, print, or email the overall inspection report for easier analysis.🔥Code Search,DTC Library provide massive information. Inbuilt “Feedback” module provides customized repair suggestions from our certified professionals.
- 【2026 UPGRADED VERSION, NEW CHIPS, ADD MORE FUNCTIONS, No Extra Software Fee】Faster! The 2026 CRP123I V3.0 car diagnostic scanner has a new processor✅Android 8.1, 2+64GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery✅FCA SGW, New Protocol CANFD & DoIP✅Work with BST360 Battery Tester & i-TPMS Tire Pressure Detector Tool（Purchase Separately）✅2.4&5GHz dual WiFi,One-touch Lifetime Free update for 100+ Global brands(1996-2026),help you access,diagnose and fix more vehicles faster,upgrade of CRP123I V2.0.
- 【Newly Added 7 RESET FUNCTIONS】+ 【BATTERY VOLTAGE TEST】2026 New Ver. scan tool CRP123I V3.0 ADDS NEW SPECIAL FUNCTIONS-Throttle Adaptation,Oil Reset,SAS Reset,ABS Bleeding,BMS Reset,EPB Reset, DPF Regeneration,to maintain your vehicle system safely and efficiently.Graphing the battery voltage easier and more intuitive for the real-time monitors to check.It does not only reveal what error codes your car is producing,but also erase your vehicle's check engine light after the problem is fixed.
- 【Multi System Diagnostic Tool】LAUNCH CRP123I V3.0 obd2 scanner check ABS/SRS/AT/ENG systems &10 OBD2 modes, read/clear fault codes,Online Google Search, 4 IN 1 Graphing.Store and playback of dynamic data stream help to quick analysis and diagnosis. Generate vehicle health reports with one click and share them with your email via Wifi which helps avoid blind maintenance. CRP123I costs less, in the long run, saving you up to $2000 each year.
- 【Lifetime Free Update + FCA SGW +CAN FD & DoIP】This scan tool features One-click wifi update and fre e for fixing more bugs; Realtime battery voltage graphing helps to Judge the state of the battery; Auto Vin,facilitate accurate diagnosis and provide useful information.Besides,CRP123I V3.0 support AutoAuth for FCA SGW,For 2017 and later FCA Vehicles with Secure Gateway Module (SGW);New Protocol CANFD & DoIP cover more newer car and boost 4X faster data transfer（need extra adapters).
- 【Cover 10000+ Models & 100+ Car Brands】CRP123I V3.0 Elite code reader for cars and trucks is capable of diagnosing fault codes on more than 10000+ vehicles from 1996 to 2026 and 90+ car makes worldwide. Support almost all 12V OBDII cars such as SUVs, minivans, light-duty trucks, etc. It's an excellent tool for all types of mechanics from novice to pros. NOTICE: Compatibility will vary on vehicles' model and year, pls reach us via Q&A/message before purchase.
- [2026 X431 PRO3 V+ Elite] A great value for the X431 series that differs from similar diagnostic tools by adding: 1) J2534 protocol for over $800 in savings; 2) CANFD/DOIP support for enhanced communications; 3) Configuration of over $900 worth of HD(heavy truck) modules, needed purchase HD diagnostic software by HD vehicle model for use.; 4) A 10.1 inch Gorilla screen with 1280*800 resolution and 80% more touch screen sensitivity
- [J2534 Protocol Scan Tool] The J2534 Direct Access Device can be used as a factory scanning tool at no cost to you, saving you over $2,000. You can easily expand your ECU protocol capabilities for Toyota, Honda, VW, BMW, Ford, GM, Chrysler, Mercedes-Benz and more. The LAUNCH X431 PRO3 V+ ELITE Scan Tool is equipped with the newly upgraded smartlinkC V2.0. smartLinkC is a communication interface that supports the J2534 specification. It can also be used as a J2534 PassThru device to implement the J2534 protocol with a PC that has OEM diagnostic software installed.The J2534 protocol is the only way to solve problems ranging from drivability and power loss to poor fuel economy
- [Top Hardware Configuration, Upgraded Version of V+] LAUNCH Diagnostic Scanner adopts Android 10.0 OS; CPU is 4-core processor with 2.0 GHz, which greatly improves the speed of running multi-tasks. 2.4GHz/5GHz; 6300mAh/7.6V ultra-large capacity battery; 10.1 inch Gorilla screen, sunlight readable, 8MP camera; Auto VIN; 4GB+64GB storage; 20x transfer rate to save more vehicle files and customer data; New TYPE A interface to connect expansion tools such as oscilloscopes, sensors, etc.; Supports more than 25 software languages such as EN, DE, FR, SP and JP
- [60+ Reset 3000+ Active Test] Full Bi-Directional Scan Tool quickly detects problems and guides repairs based on the response of actuators such as air conditioning clutches, windows, doors, mirrors and more. With the touch of a finger, you can easily send command signals from the scanner to a variety of modular actuators, testing component integrity and functionality in minutes or even seconds to determine if a replacement or repair is needed. In addition, the machine enjoys 60+ special services such as oil reset, ABS brake bleed, EPB, SAS, BMS, suspension, injector reset and more, and undergoes rigorous field testing to ensure availability
- [Unrivaled Coverage, Over 200 Vehicle Brands] LAUNCH X431 PRO3 V+ Elite Automotive Scanner is suitable for over 200 vehicle brands, including commercial vehicles and new energy vehicles. This professional car scanner supports: 1) J2534/D-PDU protocol for HD trucks; DoIP/CANFD for Land Rover/Jaguar, BMW F/G chassis, GM, etc.; 2) FCA Autoauth, covering 2018+ Chrysler/Dodge/Fiat, etc. New/old models, all covered. Includes frequently updated vehicle software and car coverage for faster support of other new models
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.