NHTSA ID Number: 10152505
Manufacturer Communication Number: ITB18-038
TSB/Document Date: 2019-01-07
Summary
2019 QX50; IPDM E/R CONFIGURATION AFTER UNIT REPLACEMENT SERVICE INFORMATION When replacing the IPDM E/R, for any reason, it must be configured to function properly. Use CONSULT-III plus (C-III plus) Re/programming, Configuration to write (configure) the correct Type ID into the IPDM E/R. For convenience, the configuration procedures (Read/Write and Manual) are provided in this bulletin with C-III plus screens. NOTE: - The vehicle will not start until IPDM E/R configuration is done. - The correct Type ID for configuration is based on vehicle options. - The part number externally marked on the IPDM E/R case is not the Type ID. - The Type ID can only be read through Re/programming, Configuration function of the C-III plus. - IPDM E/R configuration (Type ID) cannot be read through Work Support > ECU Identification. This will only show the part number that is marked on the outside of the case.
Classification:
Reference:
Date:
EL18-034
ITB18-038
November 14, 2018
2019 QX50; IPDM E/R CONFIGURATION AFTER UNIT REPLACEMENT
APPLIED VEHICLES:
2019 QX50 (J55)
SERVICE INFORMATION
When replacing the IPDM E/R, for any reason, it must be configured to function properly.
Use CONSULT-III plus (C-III plus) Re/programming, Configuration to write (configure) the correct Type ID into
the IPDM E/R.
For convenience, the configuration procedures (Read/Write and Manual) are provided in this bulletin with C-III
plus screens.
NOTE:
The vehicle will not start until IPDM E/R configuration is done.
The correct Type ID for configuration is based on vehicle options.
The part number externally marked on the IPDM E/R case is not the Type ID.
The Type ID can only be read through Re/programming, Configuration function of the C-III plus.
IPDM E/R configuration (Type ID) cannot be read through Work Support > ECU Identification. This
will only show the part number that is marked on the outside of the case.
If the IPDM E/R is configured incorrectly, the symptoms shown below may occur.
Symptom
Fog lamps will not turn ON
Cause
No configuration
No cranking/No start, but ignition can be ON
No configuration
HLL (Head Light Leveling) DTC stored
Mis-selection of Type ID
Infiniti
Bulletins are intended for use by qualified technicians, not 'do-it-yourselfers'. Qualified technicians are properly trained
individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that
a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Infiniti retailer to determine if this
applies to your vehicle.
1/17
SERVICE PROCEDURE
Before starting, make sure your ASIST has been synchronized to the current date and all C-III plus updates
have been installed.
NOTE:
There are two ways to configure the IPDM E/R; Read/Write or Manual.
The preferred method is Read/Write, starting below.
If Read/Write cannot be done, use Manual Configuration on page 10.
IPDM E/R Configuration (Read/Write)
NOTE:
For Read/Write Configuration, the old IPDM E/R must be Read before it is removed from the vehicle.
If the IPDM E/R has already been replaced, go to Manual Configuration on page 10.
1. Once all ASIST and CONSULT related updates have been performed, connect the CONSULT PC to the
vehicle.
2. Connect the AC adapter to the CONSULT PC.
3. Turn ON the CONSULT PC, and then open C-III plus.
4. Turn the ignition ON, with engine OFF.
The meter and gauges will illuminate.
Do Not start the engine.
Make sure all accessories are turned OFF.
2/17
ITB18-038
5. After the plus VI is recognized, select Re/programming, Configuration.
plus VI is
recognized
Figure 1
6. Click on the Confirmed Instructions box and then select Next.
Figure 2
3/17
ITB18-038
7. Select QX50 and 2019 or Automatic Selection(VIN).
If the screen in Figure 3 does not display – skip to step 9.
If Automatic Selection(VIN) is selected, wait for the Reading VIN screen to complete (picture not
shown).
8. Select Select.
This works,
too
Figure 3
9. Verify the VIN in VIN or Chassis # matches the vehicle.
10. If the correct VIN exists, select Confirm.
Verify
here
XXXXXXXXXXX XXXXXX
If OK, select
Confirm
Figure 4
4/17
ITB18-038
11. Select Confirm.
XXXXXXXXXXXX XXXXXX
Figure 5
12. Select IPDM E/R.
Wait for system call to complete.
NOTE: If IPDM E/R cannot be selected or is missing, go to Manual Configuration on page 10.
Figure 6
5/17
ITB18-038
13. Select Read/Write Configuration.
Figure 7
14. Select Before ECU Replacement.
Figure 8
6/17
ITB18-038
15. Select End.
XXXXXXXXXXXX XXXXXX
XXXXX
Figure 9
16. Replace the IPDM E/R.
Refer to the Electronic Service Manual (ESM) for IPDM E/R replacement.
ELECTRICAL & POWER CONTROL > POWER CONTROL SYSTEM > IPDM E/R > REMOVAL AND
INSTALLATION > IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
NOTE: Continue to the next step after the IPDM E/R has been replaced.
7/17
ITB18-038
17. Navigate C-III plus to the screen shown in Figure 10 (refer to steps 1-13).
18. Select After ECU Replacement.
Figure 10
19. Select OK.
XXXXX
Figure 11
8/17
ITB18-038
20. Select End.
XXXXX
Figure 12
21. Close C-III plus.
NOTE: If Read/Write configuration has completed successfully, stop here. Manual configuration is not needed.
9/17
ITB18-038
IPDM E/R Configuration (Manual)
IMPORTANT:
Manual Configuration will require obtaining the Type ID number (Number) from the Electronic Parts
Catalog (EPC).
The EPC will display the Type ID number in a column titled Number.
22. Obtain the Type ID number (Number) from the Electronic Parts Catalog (EPC) as follows.
a. Open the EPC.
b. Enter the VIN in the “Search by” field.
The screen in Figure 14 will then display.
Enter the VIN
Figure 13
10/17
ITB18-038
c. Verify “Part number” is selected in the drop down menu as shown.
d. Enter 284M1 in the field shown.
This is the first 5 digits of the IPDM E/R Type ID number.
Verify this shows Part
number.
Enter 284M1.
Figure 14
e. Write this Number on the repair order. It will be used to perform Manual Configuration.
This is the Type ID number.
XXXXXXXXXXX XXXXXX
XXXXX
Number (Type ID
number) will be shown
here.
Figure 15
11/17
ITB18-038
23. Replace the IPDM E/R.
Refer to the ESM for IPDM E/R replacement.
ELECTRICAL & POWER CONTROL > POWER CONTROL SYSTEM > IPDM E/R > REMOVAL AND
INSTALLATION > IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)
24. Once all ASIST and CONSULT related updates have been performed, attach the CONSULT PC to the
vehicle.
25. Connect the AC adapter to the CONSULT PC.
26. Turn ON the CONSULT PC, and then open C-III plus.
27. Turn the ignition ON, with engine OFF.
The meter and gauges will illuminate.
Do Not start the engine.
Make sure all accessories are turned OFF.
28. After the plus VI is recognized, select Re/programming, Configuration.
Figure 16
12/17
ITB18-038
29. Click on the Confirmed Instructions box and then select Next.
Figure 17
30. Select QX50 and 2019 or Automatic Selection(VIN).
If the screen in Figure 18 does not display – skip to step 32.
If Automatic Selection(VIN) is selected, wait for the Reading VIN screen to complete (picture not
shown).
31. Select Select.
This works,
too
Figure 18
13/17
ITB18-038
32. Verify the VIN in VIN or Chassis # matches the vehicle.
33. If the correct VIN is displayed, select Confirm.
Verify
here
XXXXXXXXXXX XXXXXX
If OK, select
Confirm
Figure 19
34. Select Confirm.
XXXXXXXXXXXX XXXXXX
Figure 20
14/17
ITB18-038
35. Select IPDM E/R.
Wait for system call to complete.
Figure 21
36. Select Manual Configuration.
Figure 22
15/17
ITB18-038
37. Use the arrows to locate and select the correct Type ID.
This is the Number that was written down from the EPC.
38. Select Next.
XXXXX
XXXXX
Figure 23
39. Select OK and wait for the data to transfer.
XXXXX
Figure 24
16/17
ITB18-038
40. Select End.
XXXXX
Figure 25
41. Close C-III plus.
AMENDMENT HISTORY
PUBLISHED DATE
November 14, 2018
REFERENCE
ITB18-038
DESCRIPTION
Original bulletin published
17/17
ITB18-038
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
This product presentation was made with AAWP plugin.
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: ITB18-038
Replacement Service Bulletin Number:
MFR Communication Date: 2018-11-14
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- 【OE-Level Full System Diagnostics-Lifetime F*REE Software Updates】The VDIAGTOOL D200 OBD2 Scanner for cars is a all system bidirectional scan tool that enjoy lifetime f*ree software updates, delivers complete system coverage. reading/clearing codes across engine, transmission, ABS, SAS, EPB, TPMS plus full access to body, chassis, powertrain and all control modules. This D200 Bidirectional car scanner works with most 1996+ OBD2 gasoline and hybrid
cars and light trucks. It does NOT support pure electric and heavy-duty trucks. PLEASE CHECK COMPATIBILITY BEFORE ORDERING or Contact us with VIN to confirm compatibility. - 【Supports OBD2 Full Functions-ZERO Subscription Fees】D200 Bidirectional OBD2 Scanner is a upgarde of universal car code reader. It supports OBD2 full functions to help you turn off the annoying instrument fault indicator, such as read/clear codes, O2 sensor test, I/M readiness, on-board monitor test, datastream, freeze frame, E-VAP system test, and retrieve vehicle information. This professional obd2 scanner diagnostic tool can full access to diagnostics, reset tools and maintenance features with a single payment. NOTE: The fault code can only be cleared after the vehicle's malfunction has been repaired; please ensure the vehicle issue is fixed before clearing the code.
- 【D200 Hidden 2 Advantages: 1. $169 Expandable 49+ Advanced Resets. 2. $199 Get J2534 P*a*s*s-Thru Programming】Your core car diagnostics and 26 reset remain lifetime f*ree for everyday maintenance. When you need deeper repair capability, upgrade with 3-year access for $169 in Store on VDIAGTOOL App, gaining 49+ advanced resets. D200 configured with J2534 hardware, upgrade only when you need without replacing the entire device. You also can Lifetime Unlock for $199 in Store one-time, perform module programming, software re~flashing and ECU data updates directly. Supports 17+ major brands, including for BMW, for Audi, for GM, for Ford and more. Note:D200 does‘t provide any OE software.
- 【Full Bidirectional Control / Active Tests】The D200 car scanner diagnostic tool is a true bidirectional scan tool that lets you send commands directly to the vehicle’s ECU for active tests. Quickly test fuel pumps, relays, solenoids, injectors, cooling fans, windows, sunroofs and more to verify operation instantly. Get dealership-level diagnostic control at a fraction of the cost (ofter $100-200$ per diagnostic visit), reduce guessworkand confirm repairs faster, avoid unnecessary parts replacement, towing fees and wait times.
- 【26 F*ree Essential Reset & Relearn Functions – Everyday Maintenance Made Easy】Handle common maintenance and repair jobs without visiting the shop. The D200 code readers & scan tools includes 26 f*ree high-demand reset functions, including Oil Reset, EPB Service, SAS Calibration, ABS Brake Bleeding, Throttle Relearn, Injector Coding, Headlight Adjustment, Tire Size Reset and more. Perfect for home car owners, mechanics and DIYers – just plug and diagnose anytime, anywhere! Note: Service functions vary by vehicle model—please confirm compatibility.
- Smarter Diagnostics, Broader Coverage, Greater Value Than $1,000+ Tools: The game-changing VD80BT OBD2 scanner delivers 4000+ active tests, 42+ hot services, advanced ECU coding, PMI & V.A.G Guided—all in one scanner for car. With OE-level full system scan and intelligent topology mapping that cuts diagnostic time by up to 50%, you'll work smarter and faster. Supporting FCA AutoAuth, CAN FD & DoIP protocols, this car scanner covers over 10,000 vehicle models worldwide. Built for serious pros and DIYers, it features 8" HD screen & 4+64GB storage, 7.3V fast charging with long-lasting battery, and 33–66ft stable wireless connection—making it the most complete diagnostic solution you’ll ever own
- Intuitive Topology Map, Fast Locate Faults: Why waste time clicking module by module? VD80BT car diagnostic scanner takes diagnostics to the next level with its intuitive Topology Map—a premium feature usually found in $1000+ obd scanner. With one tap, it performs all system scan and presents all modules and DTCs in a clear, color-coded layout, boosting diagnostic efficiency by up to 200% and helping you locate issues instantly and reduce repair time and costs. Whether you're a pro boosting efficiency or a beginner learning diagnostics, this obd2 scanner diagnostic tool makes fault-finding faster and smarter for you. Note: varies by vehicle model, please check compatibility before purchase
- Wireless Connectivity Simplifies Bi-Directional Control: With 4000+ active tests, including throttle reset, window calibration and solenoid check, VD80BT bidirectional scan tool lets you diagnose and verify functions faster, smarter, and more efficiently. This scanner for car redefines flexibility in bi-directional control through a fully wireless connection, freeing you from the constraints of wired car diagnostic tool in the workshop. Imagine actively controlling components like the A/C clutch, fuel injector, ABS pump, or radiator fan within a wireless range of 33–66ft around the vehicle—all while enjoying stable, high-speed wireless diagnostic and real-time data monitoring
- 42+ Hot Services, One Powerful Scanner for Car: Why pay a shop $100 just to reset a light? VD80BT car scanner diagnostic tool gives you 42+ hot services from basic resets to advanced maintenance tasks like Crank Sensor Relearn, Injector Coding, ABS Bleeding, Oil Reset, Throttle Relearn, EPB, BMS Reset, Tire Size Reset and more. Plus, it offers 100+ vehicle-specific features including Idle Relearn, VIN Write, Brake Fluid Replacement, Fuel Trim Reset, ABS Initialization and more. Whether you’re resetting TPMS or fixing a stubborn SAS, this car computer diagnostic reader delivers shop-grade precision at a fraction of the cost. Varies by model. Send VIN to verify compatibility before purchase
- OE-Level Full System Diagnostics in Your Hands: Dominate diagnostics like a dealership with VD80BT scan tool for all vehicles, delivering factory-grade scanning for aLL systems—including ABS, SRS, ECM, TCM and more. View up to 8 PID graphs simultaneously to quickly catch intermittent issues and troubleshoot with confidence. Easily read and clear DTCs, retrieve freeze frame data, and run active tests for faster, more accurate repairs. It’s like having a dealership-grade scan tool in your pocket, complete with data playback and CSV export for in-depth analysis. Stop guessing and start fixing with surgical precision—professional diagnostics made simple and portable. Check compatibility Please
- Affordable Solution for Professional-grade Car Diagnostics & Repair: As the budget-friendly OBD2 scanner under $300, the VD70 Lite car diagnostic tool offers 31+ hot resets, full bi-directional controls with 4000+ active tests, all system diagnostics, 8-in-One live data graphing (export as CSV Export/Recording/Playback), CAN FD & DoIP protocols, and long-term free update. Additional features include Auto VIN & Auto Scan, diagnostic report sharing/printing, with coverage for over 10,000 vehicle models worldwide, suitable for DIYers, Car Owners, Technicians, and Mechanics on car repairs and maintenance tasks.
- OBD2 Scanner with Full Bi-directional Control: The Bidirectional scan tool VIDAGTOOL VD70 Lite performs 4000+ active tests that can send execution commands to the ECU module and identify the repair status, covering for windows, doors, ABS, valves, wipers, headlights, rear mirrors, sunroof,and more in-vehicle components. This bidirectional OBD2 scanner is a must-have diagnostic tool for auto technicians and mechanics on a budget! The available function tests vary by model—please check compatibility via vdiagtool2 @ outlook . c o m before purchase.
- OE All Systems Diagnostics & 8-IN-One Data Graphing: VD70 Lite is a dealer-level car scanner diagnostic tool with Auto VIN that can do in-depth diagnostics for 100+ modern car brands, covering all systems including engine, transmission, airbag, ABS, ESP, TPMS, radio, etc, to read/clear code, view live data, freeze frame, and read ECU info. This advanced OBD2 Scanner with 8-in-one data graphing and detailed diagnostic reports makes data viewing more intuitive, ensures quickly accurate repairs by identifying issues, and easily masters the car situation.
- Stay Ahead with 31+ Reset for Faster & Easier Repairs: VDIAGTOOL VD70 Lite scanner for car meets almost all daily maintenance needs for both home mechanics and workshops as a professional automotive scan tool. It can perform Oil Reset, ABS Bleed, Crank Sensor Relearn, Idle Relearn, Injector Coding, Window Initialization, HVAC Calibration, Suspension Calibration, Throttle Matching, etc, ensuring efficient repairs and complete maintenance. Besides, long-term free updates keep its functionality and broad vehicle compatibility up to date. Functions vary by model, please send us the Vehicle Model, Year, VIN for compatibility before purchase.
- 150+ Models, 10000+ Car Coverage & 22 Languages：As a powerful car computer diagnostic tool, VD70 Lite helps you to quickly troubleshoot issues for 95% of US, European, and Asian vehicles. Supporting 22 languages makes it a global car diagnostic scanner for auto mechanics worldwide without language barriers. Note: Simply provide your tool’s S/N and reach out to vdiagtool2 @ outlook . c o m to change the menu language.
This product presentation was made with AAWP plugin.
Last update on 2026-06-10 / Affiliate links / Images from Amazon Product Advertising API