WATCH #543
November, 2018
Page 1 of 4
SUBJECT:

Release of Allison Transmission 6th Generation Controls

MODELS AFFECTED:

1000, 2000, 3000, and 4000 Series Product Families

Introduction:
Allison Transmission, Inc. is pleased to announce the introduction of Allison 6th Generation Controls starting in Q4
2020. The Allison 6th Generation Controls will replace the current Allison 5th Generation Controls used on 1000,
2000, 3000, and 4000 Series Product Families. The Allison 6th Generation Controls will include new Transmission
Control Module (TCM) and Push Button Shift Selector (PBSS) hardware and improved software for the TCM.
The Allison 6th Generation Controls include software and hardware upgrades from 5th Generation Controls that
enable Cyber Security and Functional Safety capabilities to support industry trends of advanced connectivity.
Vehicles equipped with Allison Transmission world-class transmissions and 6th Generation Controls will provide a
foundation for safety and cyber security capabilities that facilitate safer connectivity and protection from outside
cyber threats.

This WATCH is organized as follows:
• 6th Generation Controls new features
• Hardware and software updates
• Compatibility and support table
• Transition timing
• Additional information

6th Generation Controls New Features:
• Cyber Secure OEM Integration Ready
– Improved protection of Allison Transmission TCM Push Button Shift Selector interface
– Improved protection of Allison Transmission Digital Content
• Functional Safety Capability
– The new Allison Transmission TCM in combination with the new Allison 6th Generation Controls PBSS
was developed in accordance with ISO 26262 Functional Safety standard and contains capabilities to
support specific OEM integration objectives. Allison Transmission 6th Generation Controls are designed
to meet the standard's most stringent level of vehicle functionally safe operation.
• CAN-FD (Enabled for Future Support)
– 6th Generation Controls hardware is capable of communicating with CAN-FD networks. CAN-FD offers
increased network bandwidth compared to classical CAN.

AK/OS 125510 / WA8221EN
Copyright © 2018 Allison Transmission, Inc. All Rights Reserved.

4343842

WATCH #543
November, 2018
Page 2 of 4

Hardware and Software Updates:
• TCM Hardware External:
– Same connector and mounting locations as 5th Generation Controls.
– A 10 mm (0.393 in.) increase in size between mounting and connector (refer to Figure 1). Increased
TCM size for housing additional memory and an improved microprocessor for future capability and
feature expansion.

Figure 1. New 6th Generation Compare to 5th Generation TCM

Copyright © 2018 Allison Transmission, Inc. All Rights Reserved.

WATCH #543
November, 2018
Page 3 of 4

Figure 2. 6th Generation Controls Hardware
• New 6th Generation Controls PBSS
– Same form and fit as 5th Generation PBSS
– 6th Generation Controls PBSSs are required to enable & support Cyber Security and Functional Safety
capabilities regarding TCM to PBSS interfacing
• 6th Generation Controls Software Features
– Cyber Security improvements in programming and vehicle communications
– Functional Safety features capable of meeting the customer-specified ISO 26262 requirements

Copyright © 2018 Allison Transmission, Inc. All Rights Reserved.

WATCH #543
November, 2018
Page 4 of 4
– Fuel Economy feature improvements, including engine speed optimization and Neutral At Stop
improvements
– Additional speed management features, including retarder and automatic preselect improvements
– Communication protocol support expansion, including CAN-FD hardware ready
NOTE: Allison Transmission, Inc. will continue to support 5th Generation Controls Push Button, Bump
Lever (BLSS), and Strip selectors and their integration with 6th Generation Controls TCM and software.
However, the 5th Generation Controls Allison Transmission, Inc. selectors will not include the additional
Cyber Security and Functional Safety improvements featured in 6th Generation Controls shift selectors.

Compatibility and Support (refer to Table 1):
Table 1. 5th Generation Controls and 6th Generation Controls Compatibility and Support Table
5th Generation TCM

6th Generation TCM

Functional Safety

Cyber Security

4th Generation
Selectors

Yes

No

No

No

5th Generation PBSS

Yes

Yes

No

No

5th Generation BLSS

Yes

Yes

No

No

5th Generation Strip

Yes

Yes

No

No

6th Generation PBSS

No

Yes

Collaboration

Yes

Transition Timing:
6th Generation Controls hardware, software, and programming tools will need to be aligned at OEMs to support
transition:
• BC 201 controls software release will be launched in Q4 2020 to support 6th Generation Controls
• OEM transition period ranges from Q4 2020 to EOY 2021, with pre-production validation opportunities

For Additional Information:
For further information regarding the Allison 6th Generation Controls, contact your Allison representative.

Copyright © 2018 Allison Transmission, Inc. All Rights Reserved.