NHTSA ID Number: 10146525
Manufacturer Communication Number: B110117
TSB/Document Date: 2018-11-05
Summary
?N63T AND S63T ENGINE: VALVE SEAL REPLACEMENT . This SI provides a new tool and a new procedure for the N63TU valve seals replacement. Please refer to the following applicable SIBs before replacing the valve seals. SI B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper Repairs SI B11 01 13 - N63 and N63TU Engines: Engine Oil Consumption, Engine Oil Top-ups and Refill Capacity SI B11 03 13 - Engine Oil Consumption (all models) SI B11 04 13 - N63TU Engine: Engine Oil Consumption If the valve seals are leaking, one of the following will help determine if the seals should be replaced. Smoke from the tailpipe when starting or aggressively accelerating and decelerating the engine Excessive engine oil consumption Spark plugs fouled with engine oil.
Page 1 of 7
SI B11 01 17
Engine
February 2017
Technical Service
N63T AND S63T ENGINE: VALVE SEAL REPLACEMENT
MODEL
F01 and F02 (7 Series
Sedan) Produced from
7/2012
F07 (Gran
Turismo)
Produced from
7/2012
F10 (5 Series
Sedan) Produced
from 7/2013
F12 (6 Series
Convertible)
Produced from
7/2012
F13 (6 Series Coupe)
Produced from 7/2012
F15 (X5)
Produced from
6/2013
F16 (X6) Produced F10 (M5) Produced
from 6/2014
from 7/2012
F12 (M6 Convertible)
Produced from 7/2012
F13 (M6 Coupe)
Produced from
7/2012
SITUATION
This SI provides a new tool and a new procedure for the N63TU valve seals replacement.
Please refer to the following applicable SIBs before replacing the valve seals.
z
SI B11 07 11 - Turbocharger Failure: Oil Supply and Return Line Blockage and Proper
Repairs
z
SI B11 01 13 - N63 and N63TU Engines: Engine Oil Consumption, Engine Oil Top-ups and
Refill Capacity
z
SI B11 03 13 - Engine Oil Consumption (all models)
z
SI B11 04 13 - N63TU Engine: Engine Oil Consumption
If the valve seals are leaking, one of the following will help determine if the seals should be
replaced.
z
Smoke from the tailpipe when starting or aggressively accelerating and decelerating the
engine
z
Excessive engine oil consumption
z
Spark plugs fouled with engine oil
PROCEDURE
If one of these conditions is verified, replace the intake and exhaust valve stem seals using special
tool P/N 83 30 2 450 434.
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
Page 2 of 7
Kit Parts list:
1. Hand brush P/N AGA-HB-8-34
2. Injector Plug Hold Bracket with
Knob P/N AGA-N63TU-IPHB
3. Timing Hole Brush P/N AGAN63TU-THB
4. Plug Brush P/N AGA-N63-PB-34
(Quantity-8)
5. Fuel Injector Sealing Plug P/N
AGA-N63TU-FISP (Quantity-2)
6. Injector Rail Supply Cap P/N
AGA-CP-O14 (Quantity-4)
7. Injector & Injector Rail Cap P/N
AGA-CI-Y12-10 (Quantity-10)
8. Injector Line Cap P/N AGA-LCR08 (Quantity-8)
9. Spark Plug TDC Tool P/N AGASPT12-125 (Quantity-8)
10. Injector Bore Plastic Plug P/N
AGA-N63TU-IBPP (Quantity-2)
11. 5mm Universal Allen P/N AGAUA-60
All quantities are one unless otherwise
specified.
Replacement parts can be ordered using the
attached order form.
12. VVT Spring Lever P/N AGAN63TU-VSL
13. VVT Spring Compressor AGAN63TU-VVTS
14. TDC Indicator Flag P/N AGATDC-1
15. Exhaust Compression Bracket
P/N AGA-N63TU-ECB
16. VVT Wrench 4mm P/N AGA-VVTR-N63TU
17. Compression Rod P/N AGAN63TU-CR (Quantity-2)
18. Exhaust Valve Keeper Tool P/N
AGA-N63TU-EVKT
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
Page 3 of 7
19. Valve Seal Pliers Straight P/N
AGA-VSPS
20. Valve Seal Pliers Angled P/N
AGA-VSPA
21. Locator Handle P/N AGA-VST-LH
22. Ratcheting Wrench P/N AGA-RWN63
23. Intake Valve Keeper Tool P/N
AGA-N63TU-IVKT
24. Chain Holder P/N AGA-CHN63TU
25. Camshaft Bracket P/N AGAN63TU-CB (Quantity-2)
26. Valve Seal Installer P/N AGAN63TU-VSIT
27. Intake Compression Bracket P/N
AGA-N63TU-ICB
The attached valve seal replacement procedure supersedes the current version of the ISTA/D
valve seal replacement repair instructions.
Replace the engine oil and engine oil filter
when the valve seal replacement is completed.
If the engine oil service task shows Recommended, Due or qualifies to be performed based on the
“60-day Bundling” procedure (see SI B01 06 13), reset the engine oil service CBS data to 100%.
The video procedure for replacing the valve stem seals can be viewed via the TIS Website using
the following path:
1. Select “Service Reference” from the top menu bar.
2. Select “Service Videos.”
3. Select “General Search.”
4. Select “[11] Engine” and “Submit.”
Select “V11 02 17” February 2017 – “N63TU Valve Stem Seal Tool Procedure”
PARTS INFORMATION
The parts information below only applies to the intake and the exhaust valve seal replacement.
Refer to the ETK and the applicable repair instructions for one-time use fasteners and/or
component information regarding additional or replacement screws, gaskets, and seals that need
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
Page 4 of 7
to be installed and claimed.
Part Number
Description
Quantity
11 34 0 039 494
Valve seal repair kit
2
11 12 7 614 700
Cylinder head cover
profile gasket (cylinders
1-4)
1
11 12 7 614 701
Cylinder head cover
profile gasket (cylinders
5-8)
1
11 12 7 588 416
High-pressure pump
profile gasket
2
11 42 7 583 220
1
13 53 7 591 006
Injector gasket ring seal
8
13 53 7 577 649
Injector decoupling
element
8
Part Number
Description
Quantity
83 21 2 365 950
0W30 BMW engine oil - 1
Up to 9.6 liters
liter (MY 2016 to present)
Bulk Materials - Sublet
Or
83 21 2 449 994
0W30 BMW engine oil Tanker (MY 2016 to
present)
Up to 9.6 liters
82 14 1 467 704
Antifreeze (1 Gallon*)
See Sublet
(3.4 Gallons*)
83 29 0 429 576
Hydraulic fluid CHF 11 S
(1000ml)
See Sublet
(up to 1)
83 22 2 289 720
Automatic transmission
fluid (GA8HP70Z) (One
See sublet
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
Page 5 of 7
liter)
(up to 1)
81 22 0 142 156
Brake fluid (12oz bottle.)
See sublet
(up to 3)
Note*: Two (2) gallon of antifreeze equals four (4) gallons at a 50/50 solution mixture.
WARRANTY INFORMATION
Note: The above procedure replaces performing and claiming labor operation 11
34 560 together with the other corresponding “pre-work procedure” labor operations which
are listed/identified in the KSD2.
Covered under the terms of the BMW New Vehicle Limited Warranty for Passenger Cars and Light
Trucks or the BMW Certified Pre-Owned Program.
Defect Code:
1134064800
Labor Operation:
Labor Allowance:
Description:
11 00 050
Refer to KSD2
Removing and installing engine
(Main work)
Refer to KSD2
Removing and installing engine
(Plus work)
110 FRU
Work time to remove cylinder
head covers and replace all the
valve seals with special tool,
Part Number 83 30 2 450 434
Or
11 00 505
And:
00 50 000
If you are using a Main labor code for another repair, use the Plus code labor operation 11 00 505
instead.
Refer to KSD2 for the corresponding flat rate unit (FRU) allowances.
Work time labor operation code 00 50 000 is not considered a Main labor operation. Also, since the
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
Page 6 of 7
“work time” FRU allowance to be claimed is specified, a separate punch time is not required.
BMW Maintenance Program
*If the vehicle has a “active” maintenance program and the “Engine oil” Service task shows
“Recommended or Due” in the Service status field or it “qualifies” to be performed based on the
“60-day Bundling” procedure (See SI B01 06 13), then:
z
Perform the “Engine oil” Service task, and
z
“Reset” the CBS data, then
Submit and claim for the engine oil and filter “part numbers” under the BMW Maintenance Program
(Defect Code).
And:
Sublet – Bulk Materials
Sublet Code 4
See sublet
reimbursement
calculation below
Reimbursement for used
quantities of required operating
fluids, including engine oil only
when it is not claimed under the
BMW Maintenance Program
(applicable BMW part numbers).
Please do not use these part
numbers for claim submission.
Reimbursement for used quantities of required operating fluids (applicable BMW part numbers) at
dealer net plus your center’s handling.
Enter the material cost in sublet and itemize the amount on the repair order and in the claim
comment section.
Overlapping Labor Procedure – Other Repairs
If invoicing the KSD2 flat rate labor operation codes for other repair work results in overlapping
labor, for those flat rate labor operations that are affected, you can now:
z
Replace the stated KSD2 “FRU allowance” with a “reduced FRU value” to eliminate the
overlapping labor.
Eligible other repair work being claimed under a different defect code will require separate punch
times.
On the repair order and in the claim comment section, please identify and itemize those labor
operations being claimed with a “reduced FRU value.”
SPECIAL TOOL WARRANTY AND REPLACEMENT PARTS
The N63TU valve seal replacement kit is not covered by the BMW Special Tool Warranty.
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
Page 7 of 7
The limited warranty is administered by All German Auto – see the details below.
The warranty period is 12 months from the date of purchase. In the event of a warranty or service
replacement part-related issue, please refer to the attached order form.
ATTACHMENTS
View PDF attachment B110117_ N63TU_Valve_Seal_Tool_Order_Form.
View PDF attachment B110117_VST_Procedure.
[ Copyright ©2017 BMW of North America, Inc. ]
https://www.bmwtis.net/tiscode/cgi-bin/bulletin.aspx?sie_path=/tsb/bulletins/htm_store/400... 3/7/2017
- Advanced protection against the four main causes of engine...
- Delivers 40% stronger wear protection than industry...
- Provides 15% better deposit defense vs. industry standards...
- Up to 2.5X better heat protection vs. industry standards to...
- Engineered for excellent low-temperature flow, reducing...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: B110117
Replacement Service Bulletin Number:
MFR Communication Date: 2017-02-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ENGINE
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.