CAMRY/CAMRY HV
2018 PRE-DELIVERY SERVICE CHECK SHEET

1 Install D/C Cut Fuse* (Only install the fuse on Japan
produced vehicles [VIN Digit #1 = J] and on all vehicles
in Hawaii, Puerto Rico, U.S.V.I., Saipan, Guam, and
American Samoa. Skip this step for vehicles produced in
North America [VIN Digit #1 = 4] AND sold in the
Continental U.S.) (See page 2)……………………………….
2 Add dealer contact information for “Call Dealer”
head unit function (Entune™ 3.0 Audio Plus and
Premium Audio only).....................................................................
3 Initialize/update the Entune™ 3.0 App Suite Connect......

FUNCTIONAL OPERATION
Apply parking brake, cycle ignition “IG-ON,” place gear selector in “R,” turn on lights
and rear defogger. Unlock all doors, release fuel door, release trunk hatch.

1
2
3
4
5
6
7
8
9

Check dome, courtesy, map, and sun visor lights* .................
Check warning/indicator lights, gauges, and horn...................
Check windshield wipers and washers......................................
Check headlights, instrument lights, turn signals,
emergency flashers, and brake lights ........................................
Check inside/outside rear view mirror
operation/adjustment* ..................................................................
Check USB and 12V power outlets............................................
Check audio/navigation*/backup camera systems and
set clock..........................................................................................
Install shift-lock override button cover*......................................
Check sliding roof* ........................................................................

WALKAROUND INSPECTION
Starting at the left front door, check window and door lock operation from the
master power switch, if equipped. Continue around the vehicle in a counterclockwise
direction checking each door and window operation, child door locks, seat belts,
interior condition, all lights, and luggage compartment contents. Finish by checking
headlight aim.

1 Check Smart Key System*........................................................
2 Check door and door lock operation, including each
wireless remote control/theft deterrent system*.......................
3 Check window operation..............................................................
4 Check that engine starts with all keys .......................................
5 Check that child safety door locks are in normal
(unlocked) position........................................................................
6 Check seats and seat belt operation .........................................
7 Check rear defogger/rear view mirror defogger* .....................
8 Check side marker, tail, backup, and license plate lights.......
9 Check luggage compartment light* and trim appearance ......
10 Adjust spare tire pressure, inspect for damage, and check
jack and tool installation ...............................................................
11 Check headlight aim .....................................................................

UNDER HOOD
1
2
3
4
5
6

Check engine oil level ..................................................................
Check brake fluid level .................................................................
Check engine coolant level..........................................................
Check inverter coolant level*.......................................................
Check windshield washer fluid level ..........................................
Check battery State-Of-Charge (SOC) using digital
battery system analyzer (SOC Reading: __________%).
7 Inspect for fuel, oil, coolant, and other fluid leaks....................

BATTERY MAINTENANCE
1 Perform HV battery check and maintenance* .....................
* Inspect or install when equipped/required.

November 2017 Rev. 2

OK

UNDER VEHICLE (ON HOIST)

1 Remove disc brake anti-rust covers/anti-corrosion
wheel film* (remove just prior to customer delivery) ...............
2 Inspect tires for defects/damage ................................................
3 Initialize or verify Tire Pressure Warning System (TPWS)
(See page 2)..................................................................................
4 Install wheel covers/caps/spare tire wheel covers* .................
5 Check hybrid transmission fluid level* .......................................
6 Inspect for fuel, oil, coolant, and other fluid leaks....................
7 Inspect under the vehicle for damage, rust, etc. ......................
8 Visually check bolts and nuts on chassis and powertrain
for looseness..................................................................................
9 Install rubber body plugs (stored in glove box or
center console)* ............................................................................
10 Install front wheel opening extension pads (See page 2) ......

ROAD TEST
A complete road test helps assure customer satisfaction. Drive vehicle over a
variety of road surfaces and driving conditions. Check for unusual noise and
driving performance.
Enter Odometer Readings
Reading Before Test: _______________ Reading After Test: ________________

1
2
3
4
5
6
7
8
9
10
11
12
13
14

Check cold engine operation........................................................
Check engine operation during warm -up...................................
Check engine operation at normal operating temperature......
Check transmission operation......................................................
Check brake and parking brake operation .................................
Check steering operation and off-center/vehicle pull/flutter....
Inspect for abnormal noise and vibration ...................................
Inspect for squeaks and rattles....................................................
Check Blind Spot Monitor System* .............................................
Check front and rear* heater and A/C operation ......................
Check cruise control operation*...................................................
Check front seat heater/ventilation operation* ..........................
Set/calibrate compass* (See page 2).........................................
Initialize Parking Assist Monitor System*
(See Repair Manual: Camry / Camry HV)...............................
15 Calibrate Intelligent Clearance Sonar System *
(See page 2)...................................................................................

FINAL INSPECTION AND CLEANING
1 Remove interior protective covers, unnecessary labels,
tags, etc. (Remove just before delivery to customer)...............
2 Visually inspect all interior parts for installation, damage,
fit, dirt, etc........................................................................................
3 Verify floor mat application and install using
retaining clips*..............................................................................
4 Verify green light is illuminated on SOS
(Safety Connect) button*...............................................................
5 Remove Rapgard™ and clear protective bumper film* ...........
6 Wash and clean vehicle ................................................................
7 Inspect paint finish for scratches, chips, rust, dents,
damage, etc. ...................................................................................
8 Inspect exterior body parts for proper installation, damage,
rust, etc. ...........................................................................................
9 Place oil change sticker on inside of windshield, top
left corner.........................................................................................
10 Place Owner’s Manual portfolio* in glove box...........................
11 Install front license plate and mounting bracket
(See page 2)...................................................................................
12 Perform Techstream Health Check.............................................

Completion and retention of this f orm is required to comply with Toy ota’s Warranty Policy .

Dealer Code

Date

Dealer Name
Technician’s Signature

Serv ice Manager’s Signature

Name (Please Print)

Name (Please Print)

Adjust\
Repair

OK

BEFORE INSPECTION

Adjust\
Repair

Market: USA

Vehicle Identif ication Number (Sticker)
We hereby certify that all items on this form have been checked and corrected for proper operation as required.

D/C CUT FUSE INSTALLATION
To minimize battery discharge, the D/C Cut Fuse (25A)
has been removed and is stored in the blank space of the
engine compartment Relay Block. Install the D/C Cut
Fuse in its original location.

1
2
3

2
3

Relay Block
Remove This D/C Cut Fuse (25A)
Install D/C Cut Fuse (25A) Here
(Original Location)

1

TPWS INITIALIZATION (FOR MODELS EQUIPPED WITH A RESET SWITCH)
Refer to the Repair Manual for the Initialization procedure (Camry / Camry HV). Note the spare tire does not have a TPWS sensor.

NOTE
To adjust the tire pressure correctly when the outside temperature is significantly colder than shop temperature, perform a H ealth Check using
Techstream and select the “Compensation Tire Pressure” checkbox. Compensation pre ssures will be displayed on the Health Check results
screen. Adjust the tire pressure when the tires are cold.

FRONT WHEEL OPENING EXTENSION PAD INSTALLATION
The front wheel opening extension pad set (right and left front wheel
opening extension pads) is loaded in the luggage compartment at the
assembly plant to avoid damage in transit.

1. Remove the three self-tapping screws from the engine under cover

1

(the screws will be reused for installation).
2. Place the left front wheel opening extension pad on the installation position
as shown and tighten the three self-tapping screws.
1

NOTE
There is a distinguishable mark indicating left and right on each pad.

1

Self-tapping Screw

1

Self-tapping Screw
0

3. Repeat steps 1 and 2 for the right side.

COMPASS CALIBRATION
Refer to pg. 408 of the Owner’s Manual for the Calibration procedure for vehicles equipped with a compass in the rear view mirror.

NOTE
 Do NOT perform calibration of the compass in a place where the Earth’s magnetic field is subject to interference (underground parking,
under a steel tower, between buildings, roof parking, near a railroad crossing, near a large vehicle, etc.).

 During calibration, do not operate electric systems (moon roof, power windows, etc.) as they may interfere with the calibration.

CALIBRATION OF INTELLIGENT CLEARANCE SONAR SYSTEM
As the D/C Cut Fuse is removed, the steering angle sensor power source is cut off. It is necessary to calibrate the Intelligent Clearance
Sonar System because the steering angle sensor center position may not be stored correctly.
1. Start the engine (hybrid system).
2. Drive the vehicle straight ahead at 22 mph or more for 5 seconds or more.

NOTE
When the ICS OFF indicator light changes from blinking to off, calibration of the Intelligent Clearance Sonar System is complete.

3. Turn the engine switch (power switch) off.

FRONT LICENSE PLATE AND MOUNTING BRACKET INSTALLATION
1.
2.

3.
4.
5.
6.

Position the front license plate mounting bracket over the lower grille.
Align the installation holes on the mounting bracket with the dimples
on the front of the lower grille.
Screw in the two long self-tapping screws through the slotted and round holes of the
mounting bracket, directly into the dimples on the lower grille.
Insert the license plate into the tabs on the bracket.
A
Align the top holes of the license plate with the rounded holes
of the mounting bracket.
Screw in two short self-tapping screws through the license plate holes
into the mounting bracket.
B

NOTICE
 No drilling of holes is required during this procedure.
 Do not overtighten the screws.

A
B

Short Self-tapping
Screw 16 mm (0.630 in.)
Long Self-tapping
Screw 37 mm (1.456 in.)

1
2
3
4
5

Dimples
Front License Plate
Mounting Bracket
License Plate
Short Self-tapping
Screw
Long Self-tapping
Screw