er
3

1,
20
17

THIS LSC EXPIRES ON OCTOBER 31, 2017

TECHNICAL INSTRUCTIONS

O
ct
ob

FOR

LIMITED SERVICE CAMPAIGN E03
U760 ATM ECM SOFTWARE UPDATE

Ex

pi
re

d

on

CERTAIN
2012 - 2014 MY CAMRY

E0
3

All dealership associates involved in the LSC process are required to successfully complete E-Learning
course SC13A. To ensure that all vehicles have the repair performed correctly; technicians performing this
LSC repair are required to currently hold at least one of the following certifications levels:
• Toyota Certified (any classifications)
• Toyota Expert (any classifications)
• Master
• Master Diagnostic Technicians

THIS LSC EXPIRES ON OCTOBER 31, 2017
OPERATION FLOW CHART
Not Covered

No further action required.

Covered

Perform Health Check and Confirm
ECM Calibration

New Calibration

er
3

Old Calibration
Reflash ECM and Install Authorized
Modification Label

This campaign does not cover the
replacement of any components that could
cause the shudder concern.

Ex

pi
re

d

on

Campaign complete.
Return the vehicle to the customer.

This campaign only covers the ECM
Reflash to reduce the possibility of a
shudder condition occurring in the future.

O
ct
ob

Confirm Repair Quality

1,
20
17

Verify Vehicle Eligibility
1. Check the TIS Vehicle Inquiry
System.

E0
3

I.

2

THIS LSC EXPIRES ON OCTOBER 31, 2017
IDENTIFICATION OF AFFECTED VEHICLES
NOTE:

1,
20
17

 Check the TIS Vehicle Inquiry System to confirm the VIN is involved in this LSC and that the campaign has not
already been completed prior to dealer shipment or by another dealer.
 TMS warranty will not reimburse dealers for repairs conducted on vehicles that are not affected or was
completed by another dealer.

II. PREPARATION
A. PARTS

B. TOOLS, SUPPLIES & EQUIPMENT
Standard Hand Tools
Techstream 2.0 / TIS Techstream / Techstream Lite
GR8 Battery Diagnostic Station
T-SB-0034-14

O
ct
ob

•
•
•
•

er
3

Part Number
Part Description
Quantity
00451-00001-LBL*
Authorized Modification Label
1
*Labels can be ordered in packs of 25 from the MDC through the Dealer Daily Website

III. BACKGROUND

E0
3

Ex

pi
re

d

on

Some 2012 – 2014 Camry vehicles equipped with a U760 transmission may intermittently exhibit a brief
shudder, while driving under light loads at approximately 25 to 50 mph. The torque converter and Engine
Control Module/ECM (SAE term: Powertrain Control Module/PCM) logic have been modified to reduce the
possibility of this condition occurring.

3

THIS LSC EXPIRES ON OCTOBER 31, 2017
IV. ECM CALIBRATION ID VERIFICATION AND DTC CHECK

GRADE

ECM (CPU)

Main
ULEV
Sub
Base, LE, XLE

O
ct
ob

Main
PZEV

Sub

Main

on

ULEV
Sub

Ex

pi
re

d

SE

PZEV

Main

Sub

If the ECM has already been calibrated with the new calibration the campaign is complete.

E0
3

•

CALIBRATION
PREVIOUS
NEW
30679000
30679100
30679400
30679200
30679300
50611000
50611100
50611400
50611200
50611300
30680000
30680100
30680400
30680200
30680300
50611000
50611100
50611400
50611200
50611300
306A3000
306A3100
306A3400
306A3200
306A3300
50612000
50612100
50612400
50612200
50612300
306A4000
306A4100
306A4400
306A4200
306A4300
50612000
50612100
50612400
50612200
50612300

er
3

EMISSION SPEC

1,
20
17

A. CONFIRM ECM CALIBRATION ID
1) Perform a health check
2) Confirm the calibration ID in the ECM.

4

THIS LSC EXPIRES ON OCTOBER 31, 2017
V. ECM REFLASH PROCEDURE

•
•

1,
20
17

A. CONNECT THE GR8
a) Set the GR8 to Power Supply Mode to help maintain 13.5 volts during ECM reprogramming.
A battery charger set to power supply mode MUST be used during reprogramming.
ECM damage may occur if the correct battery charger setting is not used.

B. REFLASH THE ECM
a) Click yes on the health check results screen, or follow the links on the table above to begin the reflash
process.

If the Techstream does not have sufficient battery power the reflash will fail.
Confirm the DLC3 cable is in good condition before attempting reflash.

O
ct
ob

•
•

er
3

NOTE:
• For general reprogramming procedures, refer to T-SB-0012-13.
• Confirm the latest version of Techstream software is being used.

1
2
3
4
5

ECM P/N
New Calibration ID
Dealer Code
Date Completed
Campaign Code (E03)

pi
re

d

on

C. ATTACH THE AUTHORIZED VEHICLE MODIFICATION LABEL
a) Fill out the label.
b) Affix the label to the under-side of the hood.

Ex

1. CHECK FOR DTCs

Note: This campaign only covers the ECM Reflash to reduce the possibility of a shudder condition occurring in the future.

Confirm the ECM Calibration has been updated successfully
Confirm that an Authorized Modification Label has been installed
If you have any questions regarding this LSC, please contact your regional representative

E0
3

−
−
−

◄ VERIFY REPAIR QUALITY ►

5

THIS LSC EXPIRES ON OCTOBER 31, 2017
VI. APPENDIX
A. CAMPAIGN DESIGNATION DECODER

8 = 2008
9 = 2009
A = 2010
B = 2011
C = 2012
D = 2013
E = 2014
F = 2015
Etc...

0 = Remedy
1 = Interim (Remedy
not yet available) “1”
will change to “0” when
the Remedy is
available

Current Campaign Letter
for this year
1st Campaign = A
2nd Campaign = B
3rd Campaign = C
4th Campaign = D
5th Campaign = E
6th Campaign = F
7th Campaign = G
8th Campaign = H
9th Campaign = I
Etc...

E0
3

Ex

pi
re

d

on

O
ct
ob

Examples:
A0D = Launched in 2010, Remedy Phase, 4th Campaign Launched in 2010
C1B = Launched in 2012, Interim Phase, 2nd Campaign Launched in 2012
D0B = Launched in 2013, Remedy Phase, 1st Campaign Launched in 2013

er
3

Year Campaign is Launched Repair Phase

1,
20
17

Z

0

E

6