NHTSA ID Number: 10146477
Manufacturer Communication Number: Tech Tips News L
TSB/Document Date: 2018-11-05
Summary
Subaru Service Technical Support Line Newsletter.
home
September 2018
Subaru
Service and Technical Support Line Newsletter
ARTICLES CONTAINED
IN THIS ISSUE
CODE ARTICLE..................................PAGE
01
QMR OF THE MONTH
We are pleased to announce this month’s Winner of QMR of the Month:
(00) STIS New Releases............7-10
Garrett Fuchs from
Baierl Subaru in Pittsburgh, PA
(01) QMR of the Month............... 1-2
(01) QMR of the Month Award
Presentations...................... 2
(01) Stickers on the Windshield...... 3
(01) Authorization Requests (AR) for
Paint and Glass over $500.00... 4
(03) P2751 and no CVT
Engagement........................ 5
(15) Combination Meter
Replacement.....................5-6
(16) CVT Repairs........................ 6
SUBARU TECHLINE HOLIDAYS
& HOURS OF OPERATION
Thanksgiving: (Closed)
Thursday, November 22, 2018
Day After Thanksgiving: 10:30-3:30
Friday, November 23, 2018
Holiday Break: (Closed)
Monday, December 24, 2018
Holiday Break: (Closed)
Tuesday, December 25, 2018
Mon. - Thurs.
8:30AM - 7:30PM EST
Friday
10:30AM - 5:00PM EST
Saturday
9:00AM - 3:00PM EST
© 2018 Subaru of America, Inc. All rights reserved.
Garrett submitted his QMR on a 2018 Impreza which presented
with some of the combination meter warning lights illuminated
and a host of CAN system related DTCs in memory. After ruling
out power supplies and grounds for the related control modules,
he started a close inspection of the CAN system wiring and
connections along with confirming proper resistance values for the
terminating resistors. With all electrical checks done to this point
checking out fine, Garrett began to look closer at the list of DTCs
to see which codes may be related to each other. Working toward
the rear of the car, his search led him to the left rear body harness,
just behind the rear seat. This harness contains joint connectors
R182 and R183. When squeezing the joint connectors, Garrett
saw the remainder of the combination meter warning lights come
on. In addition, the shifter would not come out of Park. Once
Garrett isolated these joint connectors, he was able to recreate the
erratic operation of the combination meter warning lights easily.
After replacing the left side body harness, normal operation to all
systems was restored. Garrett provided an extremely detailed
step-by-step progression of his diagnosis along with quality
photographs documenting the failed harness joint connectors
which were the root cause of the condition.
In appreciation for going the extra mile and sharing his experience
with us, Garrett will be receiving the following from his Field Service
Engineer:
A $500.00 Snap-On gift card.
CONTINUED ON THE NEXT PAGE
CAUTION: VEHICLE SERVICING PERFORMED BY UNTRAINED PERSONS
COULD RESULT IN SERIOUS INJURY TO THOSE PERSONS OR TO OTHERS.
SUBARU OF AMERICA, INC. IS
ISO 14001 COMPLIANT
The Subaru TechTIPS newsletter is intended for use by professional Technicians ONLY. Articles are
written to inform those Technicians of conditions that may occur in some vehicles, or to provide
information that could assist in the proper servicing of the vehicle. Properly trained Technicians
have the equipment, tools, safety instructions, and know-how to do the job correctly and safely.
If a condition is described, DO NOT assume that your vehicle has or will have that condition.
Impreza, Legacy, Justy, Loyale, Outback, Forester, Subaru SVX, WRX, WRX STI, Baja, Tribeca,
BRZ, XV Crosstrek and “Quality Driven” are Registered Trademarks. Ascent is a trademark.
ISO 14001 is the international standard for
excellence in Environmental Management
Systems. Please recycle or dispose of
automotive products in a manner that is
friendly to our environment and in accordance
with all local, state and federal laws and
regulations.
September 2018 TechTIPS
Page 1 of 11
01
QMR OF THE MONTH
The other Regional winners selected from QMRs submitted during July 2018 were:
•
Brian Gray from Milea Subaru in Bronx, NY
•
Jeremy Buturla from Garavel Subaru in Norwalk, CT
•
Andrew Maldonado from Bob Baker Subaru in Carlsbad, CA
•
Corry Vink from Brilliance Subaru in Elgin, IL
Any Subaru Technician can participate in the QMR of the Month program. See the February 2013 and
January 2016 issues of TechTIPS for full details. You just might see your name and photo in a future
issue of Tech TIPS!
01
QMR OF THE MONTH AWARD PRESENTATIONS
As part of our “enhanced” QMR of the Month recognition program, we will be including a photo
(whenever available) of the recipient’s award presentation in TIPS. The winner selected from QMR of
the Month submissions received during July 2018, was Garret Fuchs, a Technician at Baierl Subaru in
Pittsburgh, PA.
Garrett is shown receiving his $500.00 Snap-On gift card while being joined by Chris Schultz, Field
Service Engineer, Subaru of America (center) and Baierl Subaru’s Service Manager, Joshua Gagne.
Congratulations and THANK YOU to July’s QMR of the Month Award recipient!
September 2018 TechTIPS
CONTINUED ON THE NEXT PAGE
Page 2 of 11
01
STICKERS ON THE WINDSHIELD
If you receive a vehicle which has a sticker in the windshield that has a black “A” with a green
background or a black “W” with a yellow background, be advised the vehicle had an issue discovered
at the plant or port of entry. Generally, the “W” is used for a mechanical or electrical type repair which
needs to be addressed before delivering the vehicle to a customer. Your Service Manager will receive a
message via Subarunet describing the issue in detail. The “A” is used for body repairs such as a dent,
scratch or stain type repair. The following text is copied directly from the Policy and Procedures Manual
and the photos show these stickers.
2.1.2. Disclosure of Repaired Damage
SOA will notify the retailer through the Regional Distribution Manager of repaired damage prior to
retailer receipt of the vehicle. After receiving retailer acceptance, the vehicle will be shipped with
a removable green sticker in the upper left inside corner of the vehicle’s windshield. This sticker,
marked with a bold black letter “A” will indicate to the retailer that a damage repair has been
performed on this vehicle. Details of the repair are found in the claims history of the vehicle.
Most states have adopted disclosure laws. Since these laws vary by state, retailer personnel
should familiarize themselves with the laws that apply in their jurisdiction. It is the retailer’s
responsibility to comply with their state’s laws in disclosing damage to the retail customer
accordingly.
SOA’s policy is that all damage shall be disclosed by the retailer to the customer to the extent
required by applicable state law. SOA will assist retailers in fulfilling this obligation by providing
repair documentation through the Vehicle Claim History on Subarunet.
September 2018 TechTIPS
CONTINUED ON THE NEXT PAGE
Page 3 of 11
01
AUTHORIZATION REQUESTS (AR) FOR PAINT AND GLASS OVER $500.00
On a daily basis, Techline receives Authorization Requests (AR) through Subarunet for paint and glass
repairs exceeding $500.00. These ARs are reviewed to determine if the condition reported will be
covered under Warranty. Many of the ARs submitted describe damage caused by outside influence
which is not a defect and therefore, not a matter for warranty. Prior to submitting your next AR, please
review the Subaru Claims Policy and Procedures Manual (Sections 8.4.25 and 8.4.31) to familiarize
yourself with valid repairs criteria related to Paint and Glass.
Common reasons ARs are rejected:
• Impact causing damage to the windshield or other glass, stone chips, wiper slap
(To avoid damage caused by wiper slap, it is recommended the wiper arm(s) be lowered
to the glass without letting go until the rubber of the wiper blade touches the glass.)
• Paint Chips caused by outside influence
• Clear coat lifting/blistering and/or color coat damage caused by outside influence like:
fluids, tree sap, bird droppings, solvents or impact.
To improve the process, a close inspection of the glass crack or paint condition is required to identify
any source of outside influence. If you determine a condition is not warrantable, review your findings
with the customer at the time of the inspection. Submitting an AR when it is known it will be rejected is
counterproductive for everyone involved.
If it is determined an AR is required, provide only quality pictures that clearly show the condition
being reported. All retailers are required to have a 5 mega pixel (minimum) camera that provides high
quality photos.
•
Windshield cracks must have overlapping photos showing the entire length of the
crack when applicable
•
Vehicle should be clean
•
Avoid glare from overhead lighting, bright sunlight and reflections.
It is important to review all of the pictures you intend to submit and ensure they are quality photos clearly
showing the condition being reported. If you are unable to see the condition on the photo, we will not
see it either resulting in requests for additional photos.
Following these recommendations will save you time and improve the Authorization Request process for
everyone.
September 2018 TechTIPS
CONTINUED ON THE NEXT PAGE
Page 4 of 11
03
P2751 AND NO CVT ENGAGEMENT
Techline has received a limited number of reports CVT-equipped vehicles with the AT Oil Temp light
illuminated, MIL illuminated and, the vehicle will not move. After an inspection for DTCs, Technicians find
P2751 Intermediate Shaft Speed Sensor “C” Circuit No Signal, which needs to be saved electronically
along with the freeze frame data. Reviewing the General Description in Figure 1, we can see in order for
this DTC to be detected, battery voltage must be greater than or equal to 9V, the CVT in drive or reverse,
and the measured primary pulley shaft speed greater than or equal to 1000 rpm.
Under the conditions of the DTC General Description, once all of the enable conditions are met and
the measured secondary pulley shaft speed remains at 0 rpm, the DTC is set and stored in the TCM
memory. If by following the Trouble Tree for DTC P2751 all electrical inspections are within acceptable
limits, do not forget the Variator Chain which is the link between the primary pulley and secondary pulley.
Knowing that our secondary speed sensor circuit has everything required to operate, there is a possibility
the Variator Chain has broken causing no secondary pulley speed and no vehicle movement. Removal
of the CVT unit oil pan for an inspection is required and if chain components are found, replacement of
the CVT unit is necessary to correct the concern.
15
COMBINATION METER REPLACEMENT
Did you know your Parts Manager can now order certain combination meters with the mileage already
programmed? This has been available for several months now. More information is accessible by
selecting the parts operations tab in Subarunet under “Parts Operations” and then “Combi Meter
Order Request.” The models that support this service are listed below:
September 2018 TechTIPS
CONTINUED ON THE NEXT PAGE
Page 5 of 11
15
COMBINATION METER REPLACEMENT
NOTE: The 2017 Impreza is not included.
Refer to the Service Manual for mileage
programming.
•
BRZ - 2013 and newer
•
Crosstrek - 2013 and newer
•
Forester - 2012 and newer
•
Impreza - 2012 to 2016
•
Legacy - 2010 and newer
•
Outback - 2010 and newer
•
Tribeca - 2008 and newer
•
WRX/STI - 2012 and newer
16
CVT REPAIRS
The Techline continues to receive calls from Technicians regarding CVT repairs. A lot of questions
involve what is an applicable repair inside the CVT? This information can be found in the Claims
Policy & Procedures manual on STIS. Other concerns include noises and a binding/shudder
feeling. Whenever attempting to diagnose a CVT issue, the tires should be confirmed to be within
specification. As little as a quarter inch (1/4”) difference in rolling circumference can cause internal
issues. We recommend measuring the circumference by using a rope tape measure. If unavailable,
you can use a piece of rope and standard tape measure. Wrap the rope around the center of the tread
on each tire, mark it with a marker and measure the difference of markings.
After the tires are confirmed to be within specification, move on to confirming the condition with the
CVT in Front Wheel Drive mode. In this mode, the duty solenoid for the All Wheel Drive is turned off.
This mode is achieved using the Subaru Select Monitor in the Transmission Control Module settings
under Work Support. Once activated, look for a change in the condition. For example: Customer states
the vehicle is binding on turns. Tires are within specification so, FWD mode is activated to diagnose
further. Technician notes the condition is no longer present. This would indicate an issue in the AWD
system transfer clutches which is repairable. Another example: Customer states there is a noise in the
CVT. With FWD mode is activated, if the sound goes away, it may be repairable and again, the AWD
system should be inspected. If the noise continued while FWD is active, the CVT assembly would
most likely need replacement. FWD mode should be used anytime a CVT issue is being diagnosed.
If issues continue after verifying the tires are within specification and using FWD mode, use Subaru
Select monitor to retrieve a drive file. Hitting the Enter button when the issue occurs will put a mark in
the file. Refer to the January 2018 Tech TIPS and TSB# 16-95-15R to assist in data review.
September 2018 TechTIPS
CONTINUED ON THE NEXT PAGE
Page 6 of 11
00
STIS NEW RELEASES
ITEM TYPE
TITLE
CREATED
DATE
H671SSJ000
Accessory
Installation Guide
Forester USB Charging Ports
13-Sep-18
H630SSJ000
Accessory
Installation Guide
Forester Rockford Fosgate Audi...
13-Sep-18
H630SSJ000
Accessory
Installation Guide
Forester Rockford Fosgate Audi...
13-Sep-18
L8240BE
2019 Forester Body Repair Manu...
12-Sep-18
B321SFL000
Accessory
Installation Guide
11-Sep-18
H630SSJ000
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
10-Sep-18
02-175-18R
Technical Service
Bulletin
PCV Valve- Design and Material...
7-Sep-18
H501SSG203
Accessory
Installation Guide
2019 Legacy / Outback Interior...
7-Sep-18
H671SSJ000
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
J131SSJ00
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
H461SXC000
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
SOA801P050XX
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
H001SFL100
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
J1010SJ100
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
H4510SJ000
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
J101SSJ000
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
E101SSJ000
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
F551SSJ200
Accessory
Installation Guide
PORT INSTALLATION: 2019MY Fore...
7-Sep-18
ITEM CODE
All revised publications are highlighted in yellow.
September 2018 TechTIPS
- 📌【We are Here for You】Dear valued customer, please be...
- 🚀【5X Faster Next-Level Hardware, Same as MK900/ MX...
- 🔥【3000+ Active Tests = MK900/MK900BT but...
- 📢【2026 U.S. Version, All-in-One as MK808S/ MK808Z...
- 🔥【28+ Hot Services for 150+ Brands】Same as MaxiCOM...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: Tech Tips News L
Replacement Service Bulletin Number:
MFR Communication Date: 2018-09-13
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: EQUIPMENT
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU coding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Programming): Allows for Ford, for Lincoln, and for Mazda ECU programming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- Cost-effective ECU Coding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 3 Years Software Update, Value for Money: With 3 years of software updates and 22+ languages(no IP restrictions), XTOOL D7S auto scanner code scanner ensures ongoing compatibility for the latest car models and improved diagnostic functions. This all system vehicle diagnostic scanner comes with a 30-day return policy and a 24-month repair for dependable performance. XTOOL are dedicated to your satisfaction, so enjoy seamless support and lifetime expert assistance. Should you encounter any issues or concerns, don’t hesitate to reach out XTOOL. D7S with newest update with 22 languages freely transfer without authorization, check details from setting-language or from XTOOL
- 🔥 Historical lowest pr-ice now on sa-le--hot se-lling.
- 【🎈𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝟲 𝗲𝘀𝘀𝗲𝗻𝘁𝗶𝗮𝗹 𝗿𝗲𝘀𝗲𝘁 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗔𝗕𝗦 𝗕𝗹𝗲𝗲𝗱𝗶𝗻𝗴, 𝗢𝗶𝗹 𝗥𝗲𝘀𝗲𝘁, 𝗘𝗣𝗕, 𝗦𝗔𝗦, 𝗧𝗵𝗿𝗼𝘁𝘁𝗹𝗲 𝗥𝗲𝗹𝗲𝗮𝗿𝗻, 𝗮𝗻𝗱 𝗕𝗠𝗦—𝗽𝘂𝘁𝘁𝗶𝗻𝗴 𝗽𝗿𝗼𝗳𝗲𝘀𝘀𝗶𝗼𝗻𝗮𝗹-𝗴𝗿𝗮𝗱𝗲 𝗺𝗮𝗶𝗻𝘁𝗲𝗻𝗮𝗻𝗰𝗲 𝗯𝗮𝗰𝗸 𝗶𝗻 𝘆𝗼𝘂𝗿 𝗵𝗮𝗻𝗱𝘀.】Spongy brakes? Stuck oil light? Parking brake won't release? Off-center steering? Rough idle after battery disconnect? Draining battery? IF745 handles all with a few taps. One tool covers six dealer-level resets, saving hundreds in labor costs. ❗ NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨ 𝗜𝗙𝟳𝟰𝟱 𝗴𝗼𝗲𝘀 𝗯𝗲𝘆𝗼𝗻𝗱 𝗯𝗮𝘀𝗶𝗰 𝗰𝗼𝗱𝗲 𝗿𝗲𝗮𝗱𝗶𝗻𝗴 𝘄𝗶𝘁𝗵 𝟭𝟬 𝗶𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗲𝗱 𝗳𝘂𝗻𝗰𝘁𝗶𝗼𝗻𝘀—𝗗𝗧𝗖 𝗟𝗼𝗼𝗸𝘂𝗽, 𝗜/𝗠 𝗥𝗲𝗮𝗱𝗶𝗻𝗲𝘀𝘀, 𝗙𝗿𝗲𝗲𝘇𝗲 𝗙𝗿𝗮𝗺𝗲, 𝗟𝗶𝘃𝗲 𝗗𝗮𝘁𝗮, 𝗢𝟮𝗦, 𝗢𝗕𝗠, 𝗘𝗩𝗔𝗣, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Pulling a code tells you something is wrong. IF745 tells you what the code means, when the fault happened, and what data surrounds it. Pass emissions with one I/M Readiness tap. Freeze the fault moment with Freeze Frame. Monitor live sensor data in real time. Turn cryptic codes into clear answers.
- 【🛒 𝗜𝗙𝟳𝟰𝟱 𝗽𝗲𝗿𝗳𝗼𝗿𝗺𝘀 𝗳𝘂𝗹𝗹-𝘀𝘆𝘀𝘁𝗲𝗺 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀 𝗮𝗰𝗿𝗼𝘀𝘀 𝗮𝗹𝗹 𝗺𝗼𝗱𝘂𝗹𝗲𝘀—𝗲𝗻𝗴𝗶𝗻𝗲, 𝗔𝗕𝗦, 𝗮𝗶𝗿𝗯𝗮𝗴, 𝘁𝗿𝗮𝗻𝘀𝗺𝗶𝘀𝘀𝗶𝗼𝗻, 𝘀𝘁𝗲𝗲𝗿𝗶𝗻𝗴, 𝘀𝘂𝘀𝗽𝗲𝗻𝘀𝗶𝗼𝗻, 𝗯𝗼𝗱𝘆 𝗲𝗹𝗲𝗰𝘁𝗿𝗼𝗻𝗶𝗰𝘀, 𝗮𝗻𝗱 𝗺𝗼𝗿𝗲. 】Warning lights on but you don't know why? Skip the $100+ diagnostic fee at the shop. Run a complete self-check from your driveway. IF745 reads and clears fault codes, retrieves ECU info, and displays live data from every accessible module—delivering a full vehicle health report in minutes, without leaving home.
- 【✅𝗜𝗙𝟳𝟰𝟱 𝗳𝗲𝗮𝘁𝘂𝗿𝗲𝘀 𝗮 𝟳-𝗶𝗻𝗰𝗵 𝗱𝗶𝘀𝗽𝗹𝗮𝘆, 𝗲𝗿𝗴𝗼𝗻𝗼𝗺𝗶𝗰 𝗱𝗲𝘀𝗶𝗴𝗻, 𝗪𝗶-𝗙𝗶 𝘂𝗽𝗱𝗮𝘁𝗲𝘀, 𝗮𝗻𝗱 𝘇𝗲𝗿𝗼 𝘀𝘂𝗯𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻 𝗳𝗲𝗲𝘀 𝗳𝗼𝗿 𝗵𝗮𝘀𝘀𝗹𝗲-𝗳𝗿𝗲𝗲 𝗱𝗶𝗮𝗴𝗻𝗼𝘀𝘁𝗶𝗰𝘀.】Large screen means no squinting. Intuitive navigation and customizable data displays put key info at your fingertips. Wi-Fi delivers lifetime free updates without a computer. No recurring fees. No hidden costs. Just a reliable tool that works as hard as you do.
This product presentation was made with AAWP plugin.