7/26/2018

H138 UPS8118-1bNAS1 - Update Prior to Sale: Engine Serial Number Incorrect | TOPIx

H138 UPS8118-1BNAS1

TECHNICAL BULLETIN
26 JUL 2018

© Jaguar Land Rover North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians with
the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Jaguar
service facility to determine whether this bulletin applies to a specific vehicle.

INFORMATION

SECTION:
303-01D: Engine - INGENIUM I4 2.0L Petrol

SUBJECT/CONCERN:
Update Prior to Sale: Engine Serial Number Incorrect

AFFECTED VEHICLE RANGE:
MODEL:
F-PACE (X761)

MODEL YEAR:
2018

VIN:
325361-326692

ASSEMBLY PLANT:
Solihull

APPLICABILITY:
INGENIUM I4 2.0L Petrol

MARKETS:

https://topix.jaguar.jlrext.com/topix/content/document/view?id=917636

1/4

7/26/2018

H138 UPS8118-1bNAS1 - Update Prior to Sale: Engine Serial Number Incorrect | TOPIx

NORTH AMERICA

CONDITION SUMMARY:

SITUATION:
An issue has been identified on certain vehicles within the listed Affected Vehicle Range where the
recorded engine serial number may not be correct. The engine serial number is required for systems use,
including vehicle import and registration, and if not correct may cause import, registration, and/or in-use
inspection issues.

ACTION:
Retailers are required to HOLD affected new vehicles that are within your control and refrain from
releasing the vehicles for new vehicle sale pending completion of the Workshop Procedure detailed in
this Technical Bulletin. Unsold vehicles should have this performed as part of the Pre-Delivery Inspection
(PDI) process but must have it completed prior to vehicle handover to the customer.
This program does not apply to any vehicle already registered and in use, either with the retailer or
customer. Any vehicle already in use may continue to be driven and any repair instructions deemed
necessary will be communicated through a separate Field Action or Technical Bulletin.

PARTS:
No parts required.

SPECIAL TOOLS:
Refer to TOPIx Workshop Manual/Workshop Procedure for any required special tools.

WARRANTY:

NOTES:
Use the Jaguar Land Rover claims submission system to make sure that a vehicle is affected by
this program prior to undertaking any rework action.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=917636

2/4

7/26/2018

H138 UPS8118-1bNAS1 - Update Prior to Sale: Engine Serial Number Incorrect | TOPIx

The Engine Serial Number must be entered in the Customer and/or Technician verbatim field of
the Warranty claim.
At the time of confirming a booking for vehicle repair, make sure that all open Recall and Service Actions
are identified to make sure the correct parts are available and adequate workshop time is allocated for
repairs to be completed at one visit.
Warranty claims must be submitted quoting the Program Code and the relevant Option Code; this will
result in payment of the stated time. The SRO and parts information is included for information only. The
Option Code(s) that allows for the drive in/drive out allowance may only be claimed if the vehicle is
brought back into the workshop for this action alone to be undertaken.
Repair procedures are under constant review and therefore times / prices are subject to change; those
quoted here must be taken as guidance only. Use the Jaguar Land Rover claims submission system to
obtain the latest repair time.
This program is valid for a limited time only. Warranty claims with a repair date prior to the 24 July 2019
closure date must be submitted or payment within 30 calendar days of completion of the repair.
PROGRAM
CODE
H138

OPTION
CODE
A

DESCRIPTION

Inspect engine serial
number

SRO

05.10.10

TIME
(HOURS)
0.1

PARTS/SUNDRY
CODE
-

QTY./VALUE

-

Normal Warranty policies and procedures apply.

WORKSHOP PROCEDURE

NOTES:
Variation in the illustrations may occur, but the essential information is always correct.
Components shown removed for clarity.

https://topix.jaguar.jlrext.com/topix/content/document/view?id=917636

3/4

7/26/2018

1

H138 UPS8118-1bNAS1 - Update Prior to Sale: Engine Serial Number Incorrect | TOPIx

Remove the engine cover (see TOPIx Workshop Manual section 501-05: Interior Trim and
Ornamentation - Removal and Installation - Engine Cover).

2

NOTE:
The Engine Serial Number must be entered in the Customer and/or Technician verbatim
field.


Record the engine serial number.
3

Install the engine cover (see TOPIx Workshop Manual section 501-05: Interior Trim and
Ornamentation - Removal and Installation - Engine Cover).

https://topix.jaguar.jlrext.com/topix/content/document/view?id=917636

4/4