NHTSA ID Number: 10145961
Manufacturer Communication Number: LTB01191NAS2
TSB/Document Date: 2018-10-22
Summary
The engine MIL (Malfunction Indicator Lamp) may be illuminated with DTC (Diagnostic Trouble Code) P0030-29 and/or P2251-13 stored in the Powertrain Control Module (PCM).
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
LT B 0 1 1 9 1 N A S 2
TECHNICAL BULLETIN
21 AUG 2018
© Jaguar
Land Rover
North America, LLC
NOTE: The information in Technical Bulletins is intended for use by trained, professional Technicians
with the knowledge, tools, and equipment required to do the job properly and safely. It informs these
Technicians of conditions that may occur on some vehicles, or provides information that could assist in
proper vehicle service. The procedures should not be performed by 'do-it-yourselfers'. If you are not a
Retailer, do not assume that a condition described affects your vehicle. Contact an authorized Land
Rover service facility to determine whether this bulletin applies to a specific vehicle.
I N F O R M AT I O N
This reissue replaces all previous versions. Please destroy all previous versions.
Changes are highlighted in blue
SECTION:
303-14
S U B J E C T/ C O N C E R N :
Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored
AFFECTED VEHICLE RANGE:
MODEL:
MODEL YEAR:
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
VIN:
APPLICABILITY:
1/7
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
MODEL:
MODEL YEAR:
VIN:
APPLICABILITY:
Discovery (LR)
2017-2018
000004-055735
TDV6 3.0L Diesel
Range Rover Velar (LY)
2018
700004-752401
INGENIUM I4 2.0L Diesel
Range Rover Sport (LW)
2016-2018
100003-699492
TDV6 3.0L Diesel
Range Rover (LG)
2016-2018
243372-388449
TDV6 3.0L Diesel
MARKETS:
NORTH AMERICA
CONDITION SUMMARY:
SITUATION:
The engine MIL (Malfunction Indicator Lamp) may be illuminated with DTC (Diagnostic Trouble Code)
P0030-29 and/or P2251-13 stored in the Powertrain Control Module (PCM).
CAUSE:
This may be caused by a component fault.
ACTION:
Should a customer express this concern, follow the Workshop and appropriate Diagnostic Procedure
below.
PA RTS :
PART NUMBER
DESCRIPTION
QUANTITY
LR110458
Heated Oxygen Sensor (HO2S)
1
LR016619
Gasket - TDV6
1
LR078958
Gasket - TDV6
1
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
2/7
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
TOOLS:
Jaguar
Land
Rover-approved
Midtronics battery
power supply
Jaguar Land
Rover-approved
diagnostic tool
with latest SDD
Software
Management Pack
Jaguar Land
Rover-approved
diagnostic tool
with latest
PATHFINDER
software
Refer to the
Workshop
Procedure/Worksh
op Manual for any
additional
required special
tools.
WARRANT Y:
NOTES:
Repair procedures are under constant review, and therefore times are subject to change;
those quoted here must be taken as guidance only. Always refer to JLR claims submission
system to obtain the latest repair time.
The JLR Claims Submission System requires the use of causal part numbers. Labor only claims
must show the causal part number with a quantity of zero.
DESCRIPTION
Heated Oxygen Sensor (HO2S) - Renew - Discovery (L462; TDV6
3.0L Diesel)
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
SRO
19.22.16
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
0.3
01
LR062045
3/7
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
DESCRIPTION
SRO
TIME
(HOURS)
CONDITION
CODE
CAUSAL
PART
Heated Oxygen Sensor (HO2S) - Renew - Range Rover Velar
(L560; Ingenium I4 2.0L Diesel)
19.22.16
0.1
01
LR062045
Heated Oxygen Sensor (HO2S) - Renew - Range Rover Sport
(L494; TDV6 3.0L Diesel)
19.22.16
0.5
01
LR062045
Heated Oxygen Sensor (HO2S) - Renew - Range Rover (L405;
TDV6 3.0L Diesel)
19.22.16
0.3
01
LR062045
Read and clear Diagnostic Trouble Codes (DTC)
12.90.16
0.2
01
LR062045
NOTE:
Normal Warranty procedures apply.
WORKSHOP PROCEDURE:
1
Inspect the Heated Oxygen Sensor (HO2S) wiring for a short/open circuit condition (see TOPIx
Electrical Information section Electrical Wiring Diagrams 303-14: Electronic Engine Controls).
If a short/open circuit condition is found, repair (see TOPIx Workshop Manual
section 418-02: Electrical Distribution - Wiring Harness - General Procedures Wiring Harness Repair) before continuing with this Technical Bulletin.
When the repair is finished, go to the appropriate Diagnostic Procedure
below.
If a short/open circuit condition is not found, go to Step 2.
2
Replace the Heated Oxygen Sensor (see TOPIx Workshop Manual section 303-14: Electronic
Engine Controls).
DIAGNOSTIC PROCEDURE: SDD
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
4/7
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
This Diagnostic Procedure is for 2016MY vehicles ONLY.
CAUTIONS:
A Jaguar Land Rover
-approved Midtronics battery power supply must be connected to the
vehicle startup battery during diagnosis / module programming.
All ignition ON/OFF requests must be performed. Failure to do these steps may cause
damage to control modules in the vehicle.
1
Connect the Jaguar Land Rover-approved Midtronics battery power supply to the vehicle
startup battery.
2
NOTE:
The Jaguar
Land Rover-approved diagnostic tool must be loaded with SDD154.01
Software Management Pack v299 (or later).
Connect the Jaguar
Land Rover-approved diagnostic tool to the vehicle and begin a new
session.
3
Follow all on-screen instructions, allowing the diagnostic tool to read the VIN, identify the
vehicle, and initiating the data collect sequence.
4
Read and clear all DTC.
1 Follow all on-screen instructions until the application completes successfully.
2 When all tasks are finished, go to the next Step.
5
Switch the ignition 'ON' and then 'OFF' 3 times.
6
Read all DTCs.
If DTC P0030-29 and/or P2251-13 is not stored, go to Step 7.
If DTC P0030-29 and/or P2251-13 is stored after performing a wiring repair, go to
Step 2 of the Workshop Procedure above.
7
Exit the current session.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
5/7
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
1 Select the Session tab.
2 Select the Close Session option.
8
Disconnect the diagnostic tool and battery power supply from the vehicle.
1 When all tasks are complete, release the vehicle. No further action required.
D I A G N O S T I C P R O C E D U R E : P AT H F I N D E R
This Diagnostic Procedure is for the 2017-18MY vehicles ONLY.
CAUTIONS:
A Jaguar Land Rover
-approved Midtronics battery power supply must be connected to the
vehicle startup battery during diagnosis / module programming.
All ignition ON/OFF requests must be performed. Failure to do these steps may cause
damage to control modules in the vehicle.
1
Connect the Jaguar Land Rover
-approved Midtronics battery power supply to the vehicle
startup battery.
2
NOTE:
The Jaguar
Land Rover-approved diagnostic tool must be loaded with PATHFINDER
version 181 (or later).
Connect the Jaguar Land Rover
-approved diagnostic tool to the vehicle and begin a new
session.
3
NOTE:
The Jaguar Land Rover-approved diagnostic tool will read the correct Vehicle
Identification Number (VIN) for the current vehicle and automatically take the vehicle
out of Transit mode if required.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
6/7
8/21/2018
LTB01191NAS2 - Engine MIL Illuminated With DTC P0030-29 and/or P2251-13 Stored | TOPIx
Follow all on-screen instructions.
4
Select ECU Diagnostics.
5
Select All DTCs.
6
Select Clear all DTCs.
1 Follow all on-screen instructions until the application completes successfully.
2 When all tasks are finished, go to the next Step.
7
Switch the ignition 'ON' and then 'OFF' 3 times.
8
Read all DTC.
If DTC P0030-29 and/or P2251-13 is not stored, go to Step 9.
If DTC P0030-29 and/or P2251-13 is stored after performing a wiring repair, go to
Step 2 of the Workshop Procedure above.
9
Exit the current session.
1 If required, reset the vehicle to Transit mode.
2 Select the Exit icon.
10
Disconnect the diagnostic tool and battery power supply from the vehicle.
https://topix.jaguar.jlrext.com/topix/content/document/view?id=922289
7/7
- 6X better wear protection on critical engine parts than...
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full...
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: LTB01191NAS2
Replacement Service Bulletin Number:
MFR Communication Date: 2018-08-21
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: ELECTRICAL SYSTEM
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA
AutoAuth: Now supports FCA
SGW module for Chrysler
, for Jeep
, for Dodge
(2018+), for Fiat
(2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford
, for Lincoln
, and for Mazda
ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order - 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW
, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford
, for Mazda
, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.




